Skip to main content

Establishment profile

CENTRAL MINNESOTA FINISHING INC

441 LINCOLN LOOP, SAUK CENTRE, MN, 56378
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Download as PDF →

OSHA inspections
6
over 23 years
Violations
20
$7,142 in penalties
Penalties
$7,142
$357 avg
Accident investigations on record
1 OSHA follow-up

Summary

CENTRAL MINNESOTA FINISHING INC has accumulated 20 OSHA violations across 6 inspections over 23 years of recorded history, with $7,142 in total assessed penalties.

The establishment sits in the 81st percentile for violations within its industry-state peer group of 221 employers. Inspection frequency runs at the 74th percentile. The most recent enforcement activity was recorded 6 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CENTRAL MINNESOTA FINISHING INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
6
0.3 / yr · last 23 yrs
Violations
20
0.9 / yr
Penalties
$7,142
$357 avg / violation
75% serious25% other
Inspection trigger · planned
4 of 6
Inspection trigger · complaint
1 of 6

67% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 20 citations in this view · $7,142 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0134 A0244$2,440Feb 2003Jan 2020
29 CFR 5206.070001 B33$375Feb 2003Nov 2013
29 CFR 1910.0095 C0122$1,420Feb 2003Jul 2008
29 CFR 1910.0242 B22$532Feb 2003Jan 2020
29 CFR 1820.6530822$250Feb 2003Nov 2013
29 CFR 1910.0138 A11$500Jan 2020Jan 2020
29 CFR 1910.0303 G01 II11$375Jan 2020Jan 2020
29 CFR 1910.0305 B01 II11$375Nov 2013Nov 2013
29 CFR 5205.01160111$375Nov 2013Nov 2013
29 CFR 5206.07000111$375Nov 2013Nov 2013
29 CFR 1910.0022 A0111$125Jan 2020Jan 2020
29 CFR 5206.070001 D11Feb 2003Feb 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

81st

Worse on violations than most other employers in NAICS 3328 within MN. Peer group: 221 employers. This establishment has 20 OSHA violations; peer median is 6.

Fewer violationsMore violations
Penalty percentile
86th
peer median: $1,425
Inspection frequency
74th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for CENTRAL MINNESOTA FINISHING INC. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTRAL MINNESOTA FINISHING INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
6 years ago

No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CENTRAL MINNESOTA FINISHING INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CENTRAL MINNESOTA FINISHING INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CENTRAL MINNESOTA FINISHING INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTRAL MINNESOTA FINISHING INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CENTRAL MINNESOTA FINISHING INC. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
1151769
Operation
C

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Inspection history

DateTriggerViolationsSeriousPenalty
2020-03-11Follow-up0$0
2020-01-14Planned54$1,875
2013-10-29Planned65$1,875
2009-08-21Complaint0$0
2008-06-18Planned32$2,500
2002-11-26Planned64$892

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within MN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CENTRAL MINNESOTA FINISHING INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CENTRAL MINNESOTA FINISHING INC's OSHA violation history?
CENTRAL MINNESOTA FINISHING INC has 6 OSHA inspections on record with 20 violations and $7,142 in total penalties.
How does CENTRAL MINNESOTA FINISHING INC's safety record compare to its industry?
CENTRAL MINNESOTA FINISHING INC operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.