Establishment profile
CENTRAL MACHINE & TOOL CO.
1414 E. WILLOW RD., ENID, OK, 73701
332710 — Machine Shops
Summary
CENTRAL MACHINE & TOOL CO. has accumulated 48 OSHA violations across 8 inspections over 51 years of recorded history, with $2,105 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 113 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 19 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENTRAL MACHINE & TOOL CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
63% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $2,105 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0022 A01 | 2 | 2 | $305 | Jan 1975 | Jun 1984 |
| 29 CFR 1910.0309 A 025045 | 2 | 2 | $65 | Jan 1975 | Mar 1975 |
| 29 CFR 1910.0212 A05 | 2 | 2 | $40 | Jan 1975 | Mar 1975 |
| 29 CFR 1910.0309 A 011017 | 2 | 2 | $25 | Jan 1975 | Mar 1975 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $25 | Jan 1975 | Mar 1975 |
| 29 CFR 1910.0219 E03 I | 2 | 2 | — | Jan 1975 | Mar 1975 |
| 29 CFR 1910.0095 A | 1 | 1 | $550 | Nov 1980 | Nov 1980 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $375 | Nov 1980 | Nov 1980 |
| 29 CFR 1910.1025 C01 | 1 | 1 | $350 | Nov 1980 | Nov 1980 |
| 29 CFR 1910.0243 C01 | 1 | 1 | $210 | Jun 1984 | Jun 1984 |
| 29 CFR 1910.0242 B | 1 | 1 | $60 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0106 E09 III | 1 | 1 | $25 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $25 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0252 E02 III | 1 | 1 | $25 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0178 M09 | 1 | 1 | $25 | Jan 1975 | Jan 1975 |
| 29 CFR 1910.0179 B05 | 1 | 1 | — | Jun 1984 | Jun 1984 |
| 29 CFR 1910.0179 J03 | 1 | 1 | — | Jun 1984 | Jun 1984 |
| 29 CFR 1904.0002 A | 1 | 1 | — | Jun 1984 | Jun 1984 |
| 29 CFR 1910.0095 B03 | 1 | 1 | — | Oct 1980 | Oct 1980 |
| 29 CFR 1910.0095 B01 | 1 | 1 | — | Oct 1980 | Oct 1980 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within OK. Peer group: 113 employers. This establishment has 48 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CENTRAL MACHINE & TOOL CO.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTRAL MACHINE & TOOL CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENTRAL MACHINE & TOOL CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENTRAL MACHINE & TOOL CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENTRAL MACHINE & TOOL CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTRAL MACHINE & TOOL CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENTRAL MACHINE & TOOL CO.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CENTRAL MACHINE & TOOL CO.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-04-11 | Planned | 0 | — | $0 | |
| 1984-05-31 | Planned | 5 | 2 | $490 | |
| 1980-12-02 | Follow-up | 0 | — | $0 | |
| 1980-08-25 | Complaint | 8 | 8 | $1,275 | |
| 1980-08-25 | Complaint | 1 | — | $0 | |
| 1977-03-29 | Follow-up | 0 | — | $0 | |
| 1975-02-28 | Follow-up | 11 | — | $80 | |
| 1975-01-07 | Planned | 23 | — | $260 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OK, ordered by federal enforcement volume:
- RDS MANUFACTURING, INC.BROKEN ARROW — 2 federal enforcement records
- GREEN METAL FABRICATORSTULSA — 1 federal enforcement record
- C&M PRECISION INC.OKLAHOMA CITY — 1 federal enforcement record
- SBPJ INC. D/B/A DAMAR MANUFACTURINGTULSA — 1 federal enforcement record
- ADVANCED MACHINING & FABRICATINGOWASSO — 1 federal enforcement record
- DWW, INC.DUNCAN — 1 federal enforcement record
- IDEAL SPECIALTY, INC.TULSA — 1 federal enforcement record
- FISHER PRODUCTS, INC.TULSA — 1 federal enforcement record
- INDUSTRIAL MACHINE COMPANYOKLAHOMA CITY — 1 federal enforcement record
- SERVICE AND MANUFACTURING CORPORATIONBARTLESVILLE — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in OKState-wide enforcement data
- Machine Shops in OKIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CENTRAL MACHINE & TOOL CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENTRAL MACHINE & TOOL CO.'s OSHA violation history?
- CENTRAL MACHINE & TOOL CO. has 8 OSHA inspections on record with 48 violations and $2,105 in total penalties.
- How does CENTRAL MACHINE & TOOL CO.'s safety record compare to its industry?
- CENTRAL MACHINE & TOOL CO. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.