Establishment profile
ADVANCED MACHINING & FABRICATING
11212 EAST 112TH ST. NORTH, OWASSO, OK, 74055
332710 — Machine Shops
EIN 731099018
Summary
ADVANCED MACHINING & FABRICATING has accumulated 7 OSHA violations across 2 inspections over 18 years of recorded history, with $6,632 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 113 employers. Inspection frequency runs at the 56th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED MACHINING & FABRICATING appears in OSHA workplace safety and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 7 distinct standards shown · 7 citations in this view · $6,632 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $3,104 | Jun 2018 | Jun 2018 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $2,328 | Jun 2018 | Jun 2018 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $600 | Feb 2008 | Feb 2008 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $600 | Feb 2008 | Feb 2008 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Jun 2018 | Jun 2018 |
| 29 CFR 1904.0041 A02 | 1 | 1 | — | Jun 2018 | Jun 2018 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Feb 2008 | Feb 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within OK. Peer group: 113 employers. This establishment has 7 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 48 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED MACHINING & FABRICATING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED MACHINING & FABRICATING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED MACHINING & FABRICATING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED MACHINING & FABRICATING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED MACHINING & FABRICATING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED MACHINING & FABRICATING. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ADVANCED MACHINING & FABRICATING. Verify directly with UVA Corporate Prosecution Registry →
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Federal contracts
This location
- Department of Defense4514813903!WASHER,FLATcontract · Last action 2010-07-06$10,126
- Department of Defense4513841661!WASHER,FLATcontract · Last action 2010-03-31$5,757
- Department of Defense4512606942!WASHER,FLATcontract · Last action 2009-11-21$3,373
Federal contract dollars to this establishment. Primary NAICS: 332722 - BOLT, NUT, SCREW, RIVET, AND WASHER MANUFACTURING. Last action: 2010-07-06. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-03-21 | Planned | 4 | 2 | $5,432 | |
| 2007-11-28 | Planned | 3 | 3 | $1,200 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within OK, ordered by federal enforcement volume:
- RDS MANUFACTURING, INC.BROKEN ARROW — 2 federal enforcement records
- GREEN METAL FABRICATORSTULSA — 1 federal enforcement record
- FISHER PRODUCTS, INC.TULSA — 1 federal enforcement record
- SBPJ INC. D/B/A DAMAR MANUFACTURINGTULSA — 1 federal enforcement record
- DWW, INC.DUNCAN — 1 federal enforcement record
- C&M PRECISION INC.OKLAHOMA CITY — 1 federal enforcement record
- IDEAL SPECIALTY, INC.TULSA — 1 federal enforcement record
- INDUSTRIAL MACHINE COMPANYOKLAHOMA CITY — 1 federal enforcement record
- PRECISION MFG & DESIGN INCLANGLEY — 1 federal enforcement record
- SERVICE AND MANUFACTURING CORPORATIONBARTLESVILLE — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in OKState-wide enforcement data
- Machine Shops in OKIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED MACHINING & FABRICATING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED MACHINING & FABRICATING's OSHA violation history?
- ADVANCED MACHINING & FABRICATING has 2 OSHA inspections on record with 7 violations and $6,632.4 in total penalties.
- How does ADVANCED MACHINING & FABRICATING's safety record compare to its industry?
- ADVANCED MACHINING & FABRICATING operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. ADVANCED MACHINING & FABRICATING's self-reported DART rate is 0 compared to an industry average of 1.5.