Establishment profile
CAROLINA TECHNICAL PLASTICS
901 INDUSTRIAL DRIVE, NEW BERN, NC, 28562
326199 — All Other Plastics Product Manufacturing
Summary
CAROLINA TECHNICAL PLASTICS has accumulated 20 OSHA violations across 5 inspections over 19 years of recorded history, with $12,325 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 443 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CAROLINA TECHNICAL PLASTICS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 20 citations in this view · $12,325 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 B | 2 | 2 | $450 | Feb 2011 | Jun 2013 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,700 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $2,500 | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0184 D | 1 | 1 | $2,500 | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0305 G01 IVA | 1 | 1 | $2,500 | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0215 D03 | 1 | 1 | $1,350 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $225 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $100 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | Jun 2013 | Jun 2013 |
| 29 CFR 1910.0335 B02 | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0147 C05 I | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0147 F03 I | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0333 B02 I | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0335 B01 | 1 | 1 | — | Mar 2013 | Mar 2013 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Aug 2007 | Aug 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3261 within NC. Peer group: 443 employers. This establishment has 20 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 97 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CAROLINA TECHNICAL PLASTICS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CAROLINA TECHNICAL PLASTICS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CAROLINA TECHNICAL PLASTICS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CAROLINA TECHNICAL PLASTICS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CAROLINA TECHNICAL PLASTICS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CAROLINA TECHNICAL PLASTICS. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-05-29 | Complaint | 5 | 3 | $4,150 | |
| 2013-01-31 | Complaint | 11 | 11 | $7,500 | |
| 2012-01-26 | Complaint | 0 | — | $0 | |
| 2011-01-13 | Planned | 3 | 2 | $675 | |
| 2007-07-16 | Complaint | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other plastics product manufacturing within NC, ordered by federal enforcement volume:
- PLASTIC PRODUCTS, INC.BESSEMER CITY — 2 federal enforcement records
- AIMET TECHNOLOGIES, INC.ZEBULON — 2 federal enforcement records
- MAGNA COMPOSITES L.L.C.LENOIR — 2 federal enforcement records
- H & R CUSTOM INJECTION MOLDING,INC.MONROE — 2 federal enforcement records
- MAUSER USA, LLCCHARLOTTE — 2 federal enforcement records
- HAYWARD INDUSTRIES, INC.CLEMMONS — 2 federal enforcement records
- LAWRENCE INDUSTRIES, INC.THOMASVILLE — 2 federal enforcement records
- TOTER, LLCSTATESVILLE — 2 federal enforcement records
- RPM PLASTICS, L.L.C.STATESVILLE — 2 federal enforcement records
- TECHNIMARK LLCASHEBORO — 2 federal enforcement records
Related searches
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- All Other Plastics in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CAROLINA TECHNICAL PLASTICS from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CAROLINA TECHNICAL PLASTICS's OSHA violation history?
- CAROLINA TECHNICAL PLASTICS has 5 OSHA inspections on record with 20 violations and $12,325 in total penalties.
- How does CAROLINA TECHNICAL PLASTICS's safety record compare to its industry?
- CAROLINA TECHNICAL PLASTICS operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. CAROLINA TECHNICAL PLASTICS's self-reported DART rate is 2.97 compared to an industry average of 1.8.