Establishment profile
CAROLINA MACHINING - FABRICATION
321 N NASSAU STREET, YOUNGSVILLE, NC, 27596
332322 — Sheet Metal Work Manufacturing
Summary
CAROLINA MACHINING - FABRICATION has accumulated 32 OSHA violations across 2 inspections over 9 years of recorded history, with $7,410 in total assessed penalties.
The establishment sits in the 87th percentile for violations within its industry-state peer group of 486 employers. Inspection frequency runs at the 48th percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CAROLINA MACHINING - FABRICATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $7,410 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0178 L01 I | 1 | 1 | $1,365 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | $1,365 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0333 A | 1 | 1 | $1,365 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $650 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0303 B01 II | 1 | 1 | $650 | Oct 2016 | Oct 2016 |
| 95.129(01) | 1 | 1 | $650 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0151 C | 1 | 1 | $390 | Dec 2016 | Dec 2016 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $390 | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $390 | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0303 B07 I | 1 | 1 | $195 | Oct 2016 | Oct 2016 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0134 H01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0134 K01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0095 D01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0095 I04 | 1 | 1 | — | Dec 2016 | Dec 2016 |
| 29 CFR 1910.0095 I05 | 1 | 1 | — | Dec 2016 | Dec 2016 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within NC. Peer group: 486 employers. This establishment has 32 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CAROLINA MACHINING - FABRICATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CAROLINA MACHINING - FABRICATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CAROLINA MACHINING - FABRICATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CAROLINA MACHINING - FABRICATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CAROLINA MACHINING - FABRICATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CAROLINA MACHINING - FABRICATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CAROLINA MACHINING - FABRICATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CAROLINA MACHINING - FABRICATION. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-09-27 | Referral | 20 | 7 | $1,170 | |
| 2016-08-08 | Complaint | 12 | 8 | $6,240 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within NC, ordered by federal enforcement volume:
- BREEZE BUILDING SERVICES, INC.MORRISVILLE — 2 federal enforcement records
- MID-ATLANTIC FABRICATION & FINISHING, INC.KNIGHTDALE — 1 federal enforcement record
- GRAY METAL SOUTH, INCDUNN — 1 federal enforcement record
- FORMA-FAB METALS, INC.MEBANE — 1 federal enforcement record
- J&L MACHINE FABRICATION, INC,GASTONIA — 1 federal enforcement record
- STILLWATER PRODUCTS, LLCBREVARD — 1 federal enforcement record
- UNION CORRUGATING COMPANYFAYETTEVILLE — 1 federal enforcement record
- ACCU-FAB, INC.RALEIGH — 1 federal enforcement record
- HUFFMAN METAL WORKS, INC.HICKORY — 1 federal enforcement record
- NORDFAB LLCTHOMASVILLE — 1 federal enforcement record
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Sheet Metal Work in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CAROLINA MACHINING - FABRICATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CAROLINA MACHINING - FABRICATION's OSHA violation history?
- CAROLINA MACHINING - FABRICATION has 2 OSHA inspections on record with 32 violations and $7,410 in total penalties.
- How does CAROLINA MACHINING - FABRICATION's safety record compare to its industry?
- CAROLINA MACHINING - FABRICATION operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3.