Establishment profile
BEND HEATING & SHEET METAL INC
2060 HIGHWAY 20, BEND, OR, 97701
238220 — Plumbing, Heating, and Air-Conditioning Contractors
Summary
BEND HEATING & SHEET METAL INC has accumulated 16 OSHA violations across 13 inspections over 42 years of recorded history, with $8,840 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 2,479 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
BEND HEATING & SHEET METAL INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
77% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 16 citations in this view · $8,840 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 7031.501 | 2 | 2 | $6,600 | Apr 2011 | Nov 2013 |
| 29 CFR 7020.12501 | 1 | 1 | $900 | May 2004 | May 2004 |
| 29 CFR 7010.76501 | 1 | 1 | $300 | Nov 2013 | Nov 2013 |
| 29 CFR 7030.50301 A | 1 | 1 | $300 | Nov 2013 | Nov 2013 |
| 29 CFR 1926.0453 B02 V | 1 | 1 | $180 | Feb 2008 | Feb 2008 |
| 29 CFR 1926.0501 B15 | 1 | 1 | $180 | Jan 1999 | Jan 1999 |
| 29 CFR 7030.04001 | 1 | 1 | $180 | Apr 1994 | Apr 1994 |
| 29 CFR 7400.04501 | 1 | 1 | $100 | Apr 1994 | Apr 1994 |
| 29 CFR 7010.70501 | 1 | 1 | $100 | Apr 1994 | Apr 1994 |
| 29 CFR 7020.29402 | 1 | 1 | — | Feb 2008 | Feb 2008 |
| 29 CFR 7010.76506 B A | 1 | 1 | — | Apr 2000 | Apr 2000 |
| 29 CFR 1926.0405 G02 IV | 1 | 1 | — | Apr 2000 | Apr 2000 |
| 29 CFR 1926.1053 B04 | 1 | 1 | — | Jul 1998 | Jul 1998 |
| 29 CFR 7200.00204 | 1 | 1 | — | Aug 1984 | Aug 1984 |
| 29 CFR 7200.00311 | 1 | 1 | — | Aug 1984 | Aug 1984 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 2382 within OR. Peer group: 2,479 employers. This establishment has 16 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for BEND HEATING & SHEET METAL INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for BEND HEATING & SHEET METAL INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for BEND HEATING & SHEET METAL INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for BEND HEATING & SHEET METAL INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for BEND HEATING & SHEET METAL INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for BEND HEATING & SHEET METAL INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for BEND HEATING & SHEET METAL INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-10-31 | Complaint | 0 | — | $0 | |
| 2013-10-11 | Planned | 3 | 2 | $6,900 | |
| 2011-03-24 | Planned | 1 | 1 | $300 | |
| 2008-02-06 | Planned | 1 | — | $0 | |
| 2007-12-12 | Planned | 1 | 1 | $180 | |
| 2004-04-19 | Referral | 1 | 1 | $900 | |
| 2000-03-13 | Programmed Related | 2 | — | $0 | |
| 1998-12-19 | Planned | 1 | 1 | $180 | |
| 1998-06-01 | Planned | 1 | — | $0 | |
| 1993-07-23 | Planned | 0 | — | $0 | |
| 1993-03-16 | Programmed Related | 3 | 1 | $380 | |
| 1990-03-19 | Planned | 0 | — | $0 | |
| 1984-07-27 | Planned | 2 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in plumbing, heating, and air-conditioning contractors within OR, ordered by federal enforcement volume:
- JACOBS HEATING & AIR CONDITIONING INCHILLSBORO — 2 federal enforcement records
- JACOBS HEATING & AIR CONDITIONING INCPORTLAND — 2 federal enforcement records
- HYDRO-TEMP MECHANICAL INCWILSONVILLE — 2 federal enforcement records
- HARVEY & PRICE COSPRINGFIELD — 2 federal enforcement records
- OREGON INDUSTRIAL CONTRACTORS INCALBANY — 2 federal enforcement records
- OREGON HEATING AND AIR CONDITIONING INCDUNDEE — 2 federal enforcement records
- TOTAL SYSTEM SERVICES INCPORTLAND — 2 federal enforcement records
- APOLLO SHEET METAL INCHILLSBORO — 2 federal enforcement records
- JACOBS HEATING & AIR CONDITIONING INCTIGARD — 2 federal enforcement records
- MCKINSTRY CO.PENDLETON — 2 federal enforcement records
Related searches
- Plumbing, Heating, and Air-Conditioning ContractorsAll employers in this industry
- Employers in ORState-wide enforcement data
- Plumbing, Heating, and in ORIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on BEND HEATING & SHEET METAL INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is BEND HEATING & SHEET METAL INC's OSHA violation history?
- BEND HEATING & SHEET METAL INC has 13 OSHA inspections on record with 16 violations and $8,840 in total penalties.
- How does BEND HEATING & SHEET METAL INC's safety record compare to its industry?
- BEND HEATING & SHEET METAL INC operates in the plumbing, heating, and air-conditioning contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 3.