Skip to main content

Establishment profile

ARCHER-DANIELS-MIDLAND COMPANY

620 W. 10TH ST., CHARLOTTE, NC, 28202
Operated by Archer Daniels Midland · 1 of 2 establishments
311211Flour Milling
EIN 562369362

Download as PDF →

OSHA inspections
2
over 22 years
Violations
11
$5,363 in penalties
Penalties
$5,363
$488 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

ARCHER-DANIELS-MIDLAND COMPANY has accumulated 11 OSHA violations across 2 inspections over 22 years of recorded history, with $5,363 in total assessed penalties.

The establishment sits in the 60th percentile for violations within its industry-state peer group of 26 employers. Inspection frequency runs at the 32nd percentile. The most recent enforcement activity was recorded 17 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ARCHER-DANIELS-MIDLAND COMPANY appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.1 / yr · last 22 yrs
Violations
11
0.5 / yr
Penalties
$5,363
$488 avg / violation
45% serious55% other
Inspection trigger · planned
2 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 11 distinct standards shown · 11 citations in this view · $5,363 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0119 D03 IB11$1,375Jun 2009Jun 2009
29 CFR 1910.0184 E03 III11$800Jun 2009Jun 2009
29 CFR 1910.0215 B0911$800Jun 2009Jun 2009
29 CFR 1910.0184 I09 III11$800Jun 2009Jun 2009
29 CFR 1910.0022 D0111$688Jun 2009Jun 2009
29 CFR 1910.0212 B11$500Jun 2009Jun 2009
29 CFR 1910.0212 A0111$400Jun 2009Jun 2009
29 CFR 1910.0119 G0311Jun 2009Jun 2009
29 CFR 1910.0037 B0211Jun 2009Jun 2009
29 CFR 1910.0037 Q0111Apr 2004Apr 2004
29 CFR 1910.0334 A02 I11Apr 2004Apr 2004

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

60th

Above average violations in NAICS 3112 within NC. Peer group: 26 employers. This establishment has 11 OSHA violations; peer median is 8.

Fewer violationsMore violations
Penalty percentile
72nd
peer median: $3,707
Inspection frequency
32nd
peer median: 3

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−2.2
TRIR
0.0
vs industry
−3.1

Reported for 34 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.1
BLS SOII 2024
Industry avg DART
2.2
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
17 years ago

No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ARCHER-DANIELS-MIDLAND COMPANY. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2009-04-06Planned95$5,363
2004-02-19Planned2$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

ARCHER-DANIELS-MIDLAND COMPANY is one of 2 establishments rolled up under the parent organization Archer Daniels Midland.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Archer Daniels Midland across all 2 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in flour milling within NC, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by Archer Daniels Midland, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ARCHER-DANIELS-MIDLAND COMPANY from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Archer Daniels Midland, which operates 2 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ARCHER-DANIELS-MIDLAND COMPANY's OSHA violation history?
ARCHER-DANIELS-MIDLAND COMPANY has 2 OSHA inspections on record with 11 violations and $5,363 in total penalties.
How does ARCHER-DANIELS-MIDLAND COMPANY's safety record compare to its industry?
ARCHER-DANIELS-MIDLAND COMPANY operates in the flour milling industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1. ARCHER-DANIELS-MIDLAND COMPANY's self-reported DART rate is 0 compared to an industry average of 2.2.