Establishment profile
AMERITEK, INC.
122 S. WALNUT CIRCLE, GREENSBORO, NC, 27409
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
AMERITEK, INC. has accumulated 45 OSHA violations across 5 inspections over 29 years of recorded history, with $4,750 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 130 employers. Inspection frequency runs at the 90th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERITEK, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 29 citations in this view · $4,750 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0303 G01 II | 3 | 3 | — | May 1997 | Feb 2010 |
| 29 CFR 1910.0305 B01 | 3 | 2 | — | May 1997 | Jan 2005 |
| 29 CFR 1910.0305 B02 | 2 | 2 | $488 | May 2001 | Jan 2005 |
| 29 CFR 1910.1200 G01 | 2 | 2 | — | Jan 2005 | Apr 2014 |
| 29 CFR 1910.0147 C06 II | 2 | 2 | — | May 2001 | Feb 2010 |
| 29 CFR 1910.0157 G02 | 2 | 2 | — | May 1997 | May 2001 |
| 29 CFR 1910.1200 H | 2 | 2 | — | May 1997 | May 2001 |
| 29 CFR 1910.0242 B | 1 | 1 | $750 | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0253 B02 II | 1 | 1 | $750 | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $698 | May 2001 | May 2001 |
| 29 CFR 1910.0213 C01 | 1 | 1 | $698 | May 2001 | May 2001 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $698 | May 2001 | May 2001 |
| 29 CFR 1910.0132 A | 1 | 1 | $418 | May 2001 | May 2001 |
| 29 CFR 1904.0032 B06 | 1 | 1 | $250 | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Apr 2014 | Apr 2014 |
| 7F0102 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0106 E02 IVA | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0334 A01 | 1 | 1 | — | Jan 2005 | Jan 2005 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within NC. Peer group: 130 employers. This establishment has 45 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AMERITEK, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERITEK, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERITEK, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERITEK, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERITEK, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERITEK, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERITEK, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AMERITEK, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-03-31 | Planned | 5 | 2 | $1,750 | |
| 2010-01-26 | Planned | 2 | — | $0 | |
| 2005-01-04 | Planned | 9 | — | $0 | |
| 2001-04-18 | Planned | 21 | 8 | $3,000 | |
| 1997-04-21 | Planned | 8 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within NC, ordered by federal enforcement volume:
- SOUTHEASTERN TOOL & DIE, INC.ABERDEEN — 3 federal enforcement records
- ROEBUCK PRECISION MACHINE, INCGOLDSBORO — 1 federal enforcement record
- KING MACHINE OF NORTH CAROLINA, INC.GASTONIA — 1 federal enforcement record
- R - R AUTOMATION, LLCGOLDSBORO — 1 federal enforcement record
- KING MACHINE OF NORTH CAROLINA, INC.CHARLOTTE — 1 federal enforcement record
- PROGRESSIVE TOOL & MANUFACTURING, INC.GREENSBORO — 1 federal enforcement record
- MICRON PRECISION, LLCCHARLOTTE — 1 federal enforcement record
- ATLAS DIE, LLCCHARLOTTE — 1 federal enforcement record
- ELIZABETH CARBIDE OF NORTH CAROLINA, INC.LEXINGTON — 1 federal enforcement record
- MONROE CUSTOM MOLDS, INC.MONROE — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Special Die and in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERITEK, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERITEK, INC.'s OSHA violation history?
- AMERITEK, INC. has 5 OSHA inspections on record with 45 violations and $4,750 in total penalties.
- How does AMERITEK, INC.'s safety record compare to its industry?
- AMERITEK, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.