Establishment profile
AMERICAN TOOL AND DIE
1245 SOUTHBOUND RD., SWANSEA, SC, 29160
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
AMERICAN TOOL AND DIE has accumulated 25 OSHA violations across 10 inspections over 29 years of recorded history, with $6,738 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 146 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERICAN TOOL AND DIE appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
90% of inspections at this establishment produced violations, with 7 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $6,738 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 3 | 3 | $285 | Mar 2007 | Jan 2014 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $433 | Oct 1997 | Jan 2014 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $1,875 | Aug 2014 | Aug 2014 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $875 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $750 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0217 D01 II | 1 | 1 | $490 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0147 F03 IID | 1 | 1 | $280 | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0217 C03 III | 1 | 1 | $280 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0217 C03 IE | 1 | 1 | $280 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0217 C05 I | 1 | 1 | $280 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0217 B07IV | 1 | 1 | $175 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0217 B07 IV | 1 | 1 | $160 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0217 C02 I | 1 | 1 | $160 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | $160 | Oct 1997 | Oct 1997 |
| 29 CFR 1910.0304 G06VI C5 | 1 | 1 | $75 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0334 A03 I | 1 | 1 | $60 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $60 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $60 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0157 E03 | 1 | 1 | — | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0179 J02 | 1 | 1 | — | Feb 2000 | Feb 2000 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within SC. Peer group: 146 employers. This establishment has 25 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AMERICAN TOOL AND DIE. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERICAN TOOL AND DIE. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Aug 14, 1997 | AMPUTATED,POWER PRESS,FINGER,WORK RULES,PRESS OPERATOR,PRESS,UNGUARDED | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERICAN TOOL AND DIE. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERICAN TOOL AND DIE. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERICAN TOOL AND DIE. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERICAN TOOL AND DIE. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERICAN TOOL AND DIE. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
AMERICAN TOOL & DIE 1245 SOUTHHOUND RD · SWANSEA, SC, 29160 | RCRA | No Violation Identified | 0 | 0 | — | May 1993 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AMERICAN TOOL AND DIE. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-05-06 | Accident | 1 | 1 | $1,875 | |
| 2013-11-06 | Planned | 5 | 5 | $1,513 | |
| 2010-04-21 | Planned | 5 | 4 | $240 | |
| 2007-03-21 | Planned | 1 | 1 | $150 | |
| 2005-01-05 | Planned | 0 | — | $0 | |
| 2003-01-16 | Planned | 1 | 1 | $750 | |
| 2001-12-20 | Planned | 1 | 1 | $280 | |
| 2000-01-05 | Planned | 2 | — | $0 | |
| 1997-08-15 | Accident | 8 | 8 | $1,930 | |
| 1997-01-29 | Planned | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within SC, ordered by federal enforcement volume:
- BLUE RIDGE TOOL & MACHINE CO., INC.EASLEY — 2 federal enforcement records
- WHITMAN MOLD, INC.COPE — 2 federal enforcement records
- ZELTWAGNER LPNORTH CHARLESTON — 1 federal enforcement record
- USA CARBIDE TOOLING, INC.SPARTANBURG — 1 federal enforcement record
- MIDLANDS TOOLING SYSTEMLUGOFF — 1 federal enforcement record
- JACO MACHINE & TOOL, INC.SPARTANBURG — 1 federal enforcement record
- SUPREME TOOL & DIE, INC.GREER — 1 federal enforcement record
- SENECA MACHINING, INC.SENECA — 1 federal enforcement record
- DRT POWER SYSTEMS - HOVISSIMPSONVILLE — 1 federal enforcement record
- UNITED TOOL AND MOLD, INC.EASLEY — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in SCState-wide enforcement data
- Special Die and in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERICAN TOOL AND DIE from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERICAN TOOL AND DIE's OSHA violation history?
- AMERICAN TOOL AND DIE has 10 OSHA inspections on record with 25 violations and $6,737.5 in total penalties.
- How does AMERICAN TOOL AND DIE's safety record compare to its industry?
- AMERICAN TOOL AND DIE operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.