Establishment profile
AMERICAN MANUFACTURING & ENGINEERING, INC.
506 STUMP RD., MONTGOMERYVILLE, PA, 18936
332710 — Machine Shops
EIN 541587868
Summary
AMERICAN MANUFACTURING & ENGINEERING, INC. has accumulated 16 OSHA violations across 5 inspections over 22 years of recorded history, with $3,411 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 777 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERICAN MANUFACTURING & ENGINEERING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
60% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 16 citations in this view · $3,411 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1904.0029 B01 | 3 | 1 | — | Jan 2012 | Jan 2012 |
| 29 CFR 1910.0242 B | 1 | 1 | $1,205 | Jun 2014 | Jun 2014 |
| 29 CFR 1910.0305 J01 I | 1 | 1 | $1,205 | Jun 2014 | Jun 2014 |
| 29 CFR 1910.0184 I09 III | 1 | 1 | $200 | May 2004 | May 2004 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $200 | May 2004 | May 2004 |
| 29 CFR 1910.0178 L | 1 | 1 | $200 | May 2004 | May 2004 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $200 | May 2004 | May 2004 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $200 | May 2004 | May 2004 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | — | Jun 2014 | Jun 2014 |
| 29 CFR 1910.0157 G01 | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.1200 H | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0184 I04 | 1 | 1 | — | May 2004 | May 2004 |
| 29 CFR 1910.0184 I01 | 1 | 1 | — | May 2004 | May 2004 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within PA. Peer group: 777 employers. This establishment has 16 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 38 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERICAN MANUFACTURING & ENGINEERING, INC.. Verify directly with Environmental Protection Agency →
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 314999 - ALL OTHER MISCELLANEOUS TEXTILE PRODUCT MILLS. Last action: 2021-11-30. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-05-22 | Planned | 3 | 2 | $2,411 | |
| 2011-11-30 | Planned | 3 | — | $0 | |
| 2011-01-13 | Planned | 0 | — | $0 | |
| 2008-04-16 | Planned | 0 | — | $0 | |
| 2004-04-14 | Planned | 10 | 9 | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within PA, ordered by federal enforcement volume:
- HAMILL MANUFACTURING COMPANYTRAFFORD — 3 federal enforcement records
- MARK MILLWRIGHT & RIGGING, INCORPORATEDEMIGSVILLE — 3 federal enforcement records
- ORBEL CORPORATIONEASTON — 3 federal enforcement records
- ACME MACHINE AND WELDING LLCPUNXSUTAWNEY — 3 federal enforcement records
- ERISCO INDUSTRIES, INC.ERIE — 2 federal enforcement records
- OLYMPIC STEEL, INC.CHAMBERSBURG — 2 federal enforcement records
- RSJ TECHNOLOGIES LLCCANTON — 2 federal enforcement records
- PENN STAINLESS PRODUCTS, INC.JACKSON CENTER — 2 federal enforcement records
- CHALMERS & KUBECK, INC.ASTON — 2 federal enforcement records
- THE YOUNG INDUSTRIES, INC.MUNCY — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in PAState-wide enforcement data
- Machine Shops in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERICAN MANUFACTURING & ENGINEERING, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERICAN MANUFACTURING & ENGINEERING, INC.'s OSHA violation history?
- AMERICAN MANUFACTURING & ENGINEERING, INC. has 5 OSHA inspections on record with 16 violations and $3,410.5 in total penalties.
- How does AMERICAN MANUFACTURING & ENGINEERING, INC.'s safety record compare to its industry?
- AMERICAN MANUFACTURING & ENGINEERING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. AMERICAN MANUFACTURING & ENGINEERING, INC.'s self-reported DART rate is 0 compared to an industry average of 1.5.