Establishment profile
ACME MACHINE AND WELDING LLC
46 ANCHOR INN ROAD, PUNXSUTAWNEY, PA, 15767
332710 — Machine Shops
EIN 208564811
Summary
ACME MACHINE AND WELDING LLC has accumulated 3 OSHA violations across 3 inspections over 41 years of recorded history, with $2,523 in total assessed penalties.
The establishment sits in the 49th percentile for violations within its industry-state peer group of 778 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 3 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ACME MACHINE AND WELDING LLC appears in OSHA workplace safety, MSHA mine safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $2,523 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0253 B04 III | 1 | 1 | $1,680 | Jul 2013 | Jul 2013 |
| 29 CFR 1904.0029 B01 | 1 | 1 | $600 | Jul 2013 | Jul 2013 |
| 29 CFR 1910.0147 E03 | 1 | 1 | $243 | Oct 2003 | Oct 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within PA. Peer group: 778 employers. This establishment has 3 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 83 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ACME MACHINE AND WELDING LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ACME MACHINE AND WELDING LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
Company-level in PA — for ACME MACHINE AND WELDING LLC, not this location alone
Mine Safety & Health Administration — citations issued at mining operations. MSHA records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other ACME MACHINE AND WELDING LLC operations in the same state.
MSHA citations
Mine Safety and Health Administration citations. S&S (significant and substantial) marks violations that could reasonably contribute to a serious injury. Negligence rating is MSHA’s operator-culpability assessment (none, low, moderate, high, or reckless disregard). Proposed = assessed at issuance; Paid = post-settlement / appeal. 3 citations · 1S&S · 3 contractor · $508 proposed / $508 paid.
| Citation | Mine | Date | Section | S&S | Negligence | Proposed | Paid |
|---|---|---|---|---|---|---|---|
| 8009856 | Hoffman No 1 Somerset, PA contractor: Acme Machine & Welding Co | Jul 2012 | — | Yes | ModNegligence | $285 | $285 |
| 9522065 | OYSTER RUN JOB Elk, PA contractor: Acme Machine & Welding Co | Mar 2020 | — | No | LowNegligence | $123 | $123 |
| 8009855 | Hoffman No 1 Somerset, PA contractor: Acme Machine & Welding Co | Jul 2012 | — | No | ModNegligence | $100 | $100 |
Source: MSHA citation database. “Contractor” annotations indicate the cited party was on-site at the mine but not the mine’s operator -- responsibility attaches to the contractor LLC, not the mine’s owner. Section codes reference 30 CFR (the Mine Safety and Health regulations).
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ACME MACHINE AND WELDING LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ACME MACHINE AND WELDING LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ACME MACHINE & WELDING CO ELK RUN RD · PUNXSUTAWNEY, PA, 15767 | RCRA | No Violation Identified QNCR 3 | 2 | 0 | — | Aug 2025 | View → |
ACME MACHINE & WELDING CO 119 PLEASANT AVE · PUNXSUTAWNEY, PA, 15767 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ACME MACHINE AND WELDING LLC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseTO COVER THE COST OF LABOR, EQUIPMENT AND MATERIAL FOR THE REFURBISHING OF SIX SETS OF ROTARY FORGE HAMMERS FOR WATERVLIET ARSENAL, NY 12189-4000contract · Last action 2022-11-15$238,920
- Department of Defense1 EA TOOLKIT, FORGEcontract · Last action 2018-12-06$142,687
- Department of DefenseIGF::OT::IGF REFURBISH FOUR SETS OF HAMMERS FOR ROTARY FORGE, FOR WATERVLIET ARSENAL PRODUCTION GROUPcontract · Last action 2016-03-07$118,160
- Department of DefenseORDER FOR REFURBISH G5391 G5392 FORGE HAMMERS THREE SETS, FOR THE WATERVLIET ARSENAL, NY 12189-4000contract · Last action 2018-08-16$96,360
- Department of DefenseTO COVER THE COST TO REFURBISH THREE SETS OF FORGE HAMMERS FOR THE WATERVLIET ARSENAL, NY 12189-4000contract · Last action 2020-02-04$86,250
- Department of Defense4 EA - MANDREL EXTENSION PER G5588contract · Last action 2024-03-12$69,000
- Department of Defense4 EACH - MANDREL EXTENSION PER G5745contract · Last action 2025-01-08$66,500
- Department of DefenseTO COVER THE COST OF A SET OF REFURBISH FORGE HAMMERS FOR THE WATERVLIET ARSENAL, WATERVLIET, NYcontract · Last action 2021-04-15$49,920
- Department of Defense120 AND 155 MANDREL EXTENSIONScontract · Last action 2022-09-12$48,580
- Department of Defense1 EACH - ROTARY FORGE HAMMER, PER DRAWING G5392, REVISION F, G5507 (LATEST REVISION) 1 EACH - ROTARY FORGE HAMMER, PER DRAWING G5391, REVISION F, G5507 (LATEST REVISION)contract · Last action 2020-12-02$28,860
- Department of Defense4 EACH - WATER PIPE ASSEMBLY, PER DRAWING G5683contract · Last action 2024-11-12$7,500
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2025-01-08. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-06-13 | Planned | 2 | 1 | $2,280 | |
| 2003-10-23 | Planned | 1 | 1 | $243 | |
| 1984-06-28 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within PA, ordered by federal enforcement volume:
- MARK MILLWRIGHT & RIGGING, INCORPORATEDEMIGSVILLE — 3 federal enforcement records
- HAMILL MANUFACTURING COMPANYTRAFFORD — 3 federal enforcement records
- ORBEL CORPORATIONEASTON — 3 federal enforcement records
- OLYMPIC STEEL, INC.CHAMBERSBURG — 2 federal enforcement records
- ERISCO INDUSTRIES, INC.ERIE — 2 federal enforcement records
- RSJ TECHNOLOGIES LLCCANTON — 2 federal enforcement records
- PENN STAINLESS PRODUCTS, INC.JACKSON CENTER — 2 federal enforcement records
- THE YOUNG INDUSTRIES, INC.MUNCY — 2 federal enforcement records
- CHALMERS & KUBECK, INC.ASTON — 2 federal enforcement records
- DYNAMIC MATERIALS CORPORATIONMOUNT BRADDOCK — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in PAState-wide enforcement data
- Machine Shops in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ACME MACHINE AND WELDING LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ACME MACHINE AND WELDING LLC's OSHA violation history?
- ACME MACHINE AND WELDING LLC has 3 OSHA inspections on record with 3 violations and $2,523 in total penalties.
- How does ACME MACHINE AND WELDING LLC's safety record compare to its industry?
- ACME MACHINE AND WELDING LLC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. ACME MACHINE AND WELDING LLC's self-reported DART rate is 0 compared to an industry average of 1.5.