Establishment profile
AMERICAN MACHINING & MANUFACTURING CO., INC.
1412 YEMASSEE HWY, VARNVILLE, SC, 29944
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
AMERICAN MACHINING & MANUFACTURING CO., INC. has accumulated 47 OSHA violations across 6 inspections over 32 years of recorded history, with $1,025 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 147 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMERICAN MACHINING & MANUFACTURING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
83% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $1,025 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 2 | 2 | $190 | Jun 2001 | Oct 2007 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $100 | Jun 2001 | Oct 2007 |
| 29 CFR 1910.0212 A05 | 2 | 2 | $60 | Jun 2001 | Jul 2010 |
| 29 CFR 1910.0219 E03 I | 2 | 2 | $60 | Jun 2001 | Jul 2010 |
| 29 CFR 1910.0037 Q01 | 2 | 2 | — | Jan 1994 | Jun 2001 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $375 | Oct 2007 | Oct 2007 |
| 29 CFR 1001.2 A | 1 | 1 | $100 | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0107 E02 | 1 | 1 | $80 | Jul 2010 | Jul 2010 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $60 | Jul 2010 | Jul 2010 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Oct 2007 | Oct 2007 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0107 B10 | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0107 C05 | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0157 E03 | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0024 B | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0217 B07 V | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0110 H06 IIB | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0107 G07 | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0107 B01 | 1 | 1 | — | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0107 C06 | 1 | 1 | — | Jun 2001 | Jun 2001 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within SC. Peer group: 147 employers. This establishment has 47 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AMERICAN MACHINING & MANUFACTURING CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefensePULL-UP BARScontract · Last action 2010-08-12$49,989
- Department of DefensePULL UP BARScontract · Last action 2010-06-29$10,422
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2010-08-12. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-06-03 | Planned | 4 | 4 | $260 | |
| 2007-08-21 | Planned | 5 | 4 | $675 | |
| 2001-05-29 | Referral | 29 | 9 | $90 | |
| 2001-05-15 | Planned | 4 | — | $0 | |
| 1996-08-07 | Planned | 0 | — | $0 | |
| 1993-12-15 | Planned | 5 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within SC, ordered by federal enforcement volume:
- BLUE RIDGE TOOL & MACHINE CO., INC.EASLEY — 2 federal enforcement records
- WHITMAN MOLD, INC.COPE — 2 federal enforcement records
- ZELTWAGNER LPNORTH CHARLESTON — 1 federal enforcement record
- USA CARBIDE TOOLING, INC.SPARTANBURG — 1 federal enforcement record
- MIDLANDS TOOLING SYSTEMLUGOFF — 1 federal enforcement record
- JACO MACHINE & TOOL, INC.SPARTANBURG — 1 federal enforcement record
- SUPREME TOOL & DIE, INC.GREER — 1 federal enforcement record
- SENECA MACHINING, INC.SENECA — 1 federal enforcement record
- DRT POWER SYSTEMS - HOVISSIMPSONVILLE — 1 federal enforcement record
- UNITED TOOL AND MOLD, INC.EASLEY — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in SCState-wide enforcement data
- Special Die and in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMERICAN MACHINING & MANUFACTURING CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMERICAN MACHINING & MANUFACTURING CO., INC.'s OSHA violation history?
- AMERICAN MACHINING & MANUFACTURING CO., INC. has 6 OSHA inspections on record with 47 violations and $1,025 in total penalties.
- How does AMERICAN MACHINING & MANUFACTURING CO., INC.'s safety record compare to its industry?
- AMERICAN MACHINING & MANUFACTURING CO., INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.