Establishment profile
AMADA TOOL AMERICA, INC.
4A TREADEASY AVE., BATAVIA, NY, 14020
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 160902787
Summary
AMADA TOOL AMERICA, INC. has accumulated 12 OSHA violations across 5 inspections over 19 years of recorded history, with $10,775 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 105 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 1 year ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
AMADA TOOL AMERICA, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 11 distinct standards shown · 12 citations in this view · $10,775 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C06 II | 2 | 2 | — | Jul 2013 | Aug 2024 |
| 29 CFR 1910.0147 C07 IA | 1 | 1 | $2,675 | Dec 2010 | Dec 2010 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,250 | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $2,250 | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0212 A02 | 1 | 1 | $2,250 | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0037 A03 | 1 | 1 | $1,350 | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0179 J03 | 1 | 1 | — | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0212 B | 1 | 1 | — | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0303 G01 III | 1 | 1 | — | Dec 2006 | Dec 2006 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Dec 2006 | Dec 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within NY. Peer group: 105 employers. This establishment has 12 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 76 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for AMADA TOOL AMERICA, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for AMADA TOOL AMERICA, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for AMADA TOOL AMERICA, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for AMADA TOOL AMERICA, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for AMADA TOOL AMERICA, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for AMADA TOOL AMERICA, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for AMADA TOOL AMERICA, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-08-05 | Planned | 1 | — | $0 | |
| 2015-10-23 | Planned | 0 | — | $0 | |
| 2013-07-25 | Planned | 1 | — | $0 | |
| 2010-10-21 | Planned | 1 | 1 | $2,675 | |
| 2006-10-12 | Planned | 9 | 4 | $8,100 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within NY, ordered by federal enforcement volume:
- MAJESTIC MOLD & TOOL INC.PHOENIX — 1 federal enforcement record
- BRANDY'S MOLD & TOOL CENTER, LTD.WEST HENRIETTA — 1 federal enforcement record
- SPARTAN TOOL & DIESINCLAIRVILLE — 1 federal enforcement record
- COSMOS ELECTRONIC MACHINE CORP.FARMINGDALE — 1 federal enforcement record
- SYNERGY TOOLING SYSTEMSAMHERST — 1 federal enforcement record
- RID-LOM PRECISION MFG. CORP.ROCHESTER — 1 federal enforcement record
- DIVERSIFIED MANUFACTURING ACQUISITION, INC.LOCKPORT — 1 federal enforcement record
- MG'S PRECISION DIE CUTTING, INC.JOHNSTOWN — 1 federal enforcement record
- PALMA ACQUISITION INC.LANCASTER — 1 federal enforcement record
- UNIVERSAL TOOLING CORPORATIONGERRY — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Special Die and in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on AMADA TOOL AMERICA, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is AMADA TOOL AMERICA, INC.'s OSHA violation history?
- AMADA TOOL AMERICA, INC. has 5 OSHA inspections on record with 12 violations and $10,775 in total penalties.
- How does AMADA TOOL AMERICA, INC.'s safety record compare to its industry?
- AMADA TOOL AMERICA, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. AMADA TOOL AMERICA, INC.'s self-reported DART rate is 0 compared to an industry average of 1.4.