Establishment profile
COSMOS ELECTRONIC MACHINE CORP.
140 SCHMITT BOULEVARD, FARMINGDALE, NY, 11735
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
COSMOS ELECTRONIC MACHINE CORP. has accumulated 11 OSHA violations across 5 inspections over 44 years of recorded history, with $2,685 in total assessed penalties.
The establishment sits in the 78th percentile for violations within its industry-state peer group of 106 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
COSMOS ELECTRONIC MACHINE CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
40% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 11 distinct standards shown · 11 citations in this view · $2,685 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $900 | Mar 2010 | Mar 2010 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $525 | May 2009 | May 2009 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $315 | May 2009 | May 2009 |
| 29 CFR 1910.0157 G01 | 1 | 1 | $315 | May 2009 | May 2009 |
| 29 CFR 1910.0037 A04 | 1 | 1 | $315 | May 2009 | May 2009 |
| 29 CFR 1910.0132 F01 II | 1 | 1 | $315 | May 2009 | May 2009 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | May 2009 | May 2009 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | May 2009 | May 2009 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | May 2009 | May 2009 |
| 29 CFR 1910.0134 K03 | 1 | 1 | — | May 2009 | May 2009 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | May 2009 | May 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within NY. Peer group: 106 employers. This establishment has 11 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for COSMOS ELECTRONIC MACHINE CORP.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.
- Department of DefenseKBAR HEAT SEALING MACHINEcontract · Last action 2010-04-01$51,775
- Department of DefenseN4215811RC10253contract · Last action 2011-01-13$4,480
- Department of DefenseINSTALLATION OF HEAT SEALING MACHINEcontract · Last action 2010-05-05$2,000
Federal contract dollars to this establishment. Primary NAICS: 333993 - PACKAGING MACHINERY MANUFACTURING. Last action: 2011-01-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-03-01 | Planned | 1 | 1 | $900 | |
| 2009-04-27 | Planned | 10 | 8 | $1,785 | |
| 1985-01-07 | Planned | 0 | — | $0 | |
| 1984-05-11 | Planned | 0 | — | $0 | |
| 1981-09-16 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within NY, ordered by federal enforcement volume:
- BRANDY'S MOLD & TOOL CENTER, LTD.WEST HENRIETTA — 1 federal enforcement record
- SYNERGY TOOLING SYSTEMSAMHERST — 1 federal enforcement record
- SPARTAN TOOL & DIESINCLAIRVILLE — 1 federal enforcement record
- MAJESTIC MOLD & TOOL INC.PHOENIX — 1 federal enforcement record
- RID-LOM PRECISION MFG. CORP.ROCHESTER — 1 federal enforcement record
- DIVERSIFIED MANUFACTURING ACQUISITION, INC.LOCKPORT — 1 federal enforcement record
- MG'S PRECISION DIE CUTTING, INC.JOHNSTOWN — 1 federal enforcement record
- PALMA ACQUISITION INC.LANCASTER — 1 federal enforcement record
- UNIVERSAL TOOLING CORPORATIONGERRY — 1 federal enforcement record
- WILSEY INC.CHADWICKS — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Special Die and in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on COSMOS ELECTRONIC MACHINE CORP. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is COSMOS ELECTRONIC MACHINE CORP.'s OSHA violation history?
- COSMOS ELECTRONIC MACHINE CORP. has 5 OSHA inspections on record with 11 violations and $2,685 in total penalties.
- How does COSMOS ELECTRONIC MACHINE CORP.'s safety record compare to its industry?
- COSMOS ELECTRONIC MACHINE CORP. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.