Skip to main content

Establishment profile

ALLIANCE STEEL AND FABRICATIONS, INC.

9106 MANASSAS DRIVE, MANASSAS PARK, VA, 20111
332312Fabricated Structural Metal Manufacturing

Download as PDF →

OSHA inspections
6
over 25 years
Violations
38
$6,339 in penalties
Penalties
$6,339
$167 avg

Summary

ALLIANCE STEEL AND FABRICATIONS, INC. has accumulated 38 OSHA violations across 6 inspections over 25 years of recorded history, with $6,339 in total assessed penalties.

The establishment sits in the 91st percentile for violations within its industry-state peer group of 466 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 7 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ALLIANCE STEEL AND FABRICATIONS, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
6
0.2 / yr · last 25 yrs
Violations
38
1.5 / yr
Penalties
$6,339
$167 avg / violation
82% serious18% other
Inspection trigger · planned
5 of 6
Inspection trigger · referral
1 of 6

83% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $6,339 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0305 B0122$175Feb 2001Jun 2006
29 CFR 1910.0253 B04 III22$175Feb 2001Jun 2006
29 CFR 1910.0212 A0122$125Jun 2006Apr 2019
29 CFR 1910.0215 A0422$100Jun 2006Apr 2019
29 CFR 1910.0305 G02 III22$75Feb 2001Jun 2006
29 CFR 1910.0215 B0922Jun 2006Apr 2019
29 CFR 1904.0001 A0211$3,000Jun 2006Jun 2006
29 CFR 1910.0178 L01 I11$900Feb 2001Feb 2001
29 CFR 1910.0305 B01 II11$600Apr 2019Apr 2019
29 CFR 1910.0212 A03 II11$600Apr 2019Apr 2019
29 CFR 1910.0134 C0111$189Dec 2009Dec 2009
29 CFR 1910.1200 F05 I11$100Jun 2006Jun 2006
29 CFR 1910.0303 B01 III11$100Jun 2006Jun 2006
29 CFR 1910.0178 L04 III11$100Jun 2006Jun 2006
29 CFR 1910.0147 C04 I11$100Jun 2006Jun 2006
29 CFR 1910.0305 G02 III11Apr 2019Apr 2019
29 CFR 1910.0303 G01 I A11Apr 2019Apr 2019
29 CFR 1910.0305 B01 I11Apr 2019Apr 2019
29 CFR 1910.0303 F0211Apr 2019Apr 2019
29 CFR 1910.0134 K0111Dec 2009Dec 2009

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

91st

Worse on violations than most other employers in NAICS 3323 within VA. Peer group: 466 employers. This establishment has 38 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
83rd
peer median: $877
Inspection frequency
87th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
7 years ago

No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
605628
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ALLIANCE STEEL AND FABRICATIONS, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2019-02-14Planned97$1,200
2013-08-13Planned0$0
2009-12-01Planned55$189
2006-05-16Referral1$0
2006-05-01Planned1814$3,825
2001-01-30Planned55$1,125

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within VA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ALLIANCE STEEL AND FABRICATIONS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ALLIANCE STEEL AND FABRICATIONS, INC.'s OSHA violation history?
ALLIANCE STEEL AND FABRICATIONS, INC. has 6 OSHA inspections on record with 38 violations and $6,339 in total penalties.
How does ALLIANCE STEEL AND FABRICATIONS, INC.'s safety record compare to its industry?
ALLIANCE STEEL AND FABRICATIONS, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.