Establishment profile
ADVANCED TELEMETRY SYSTEMS INC
470 1ST AVE N, ISANTI, MN, 55040
334511 — Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
EIN 411399189
Summary
ADVANCED TELEMETRY SYSTEMS INC has accumulated 1 OSHA violation across 3 inspections over 34 years of recorded history.
The establishment sits in the 32nd percentile for violations within its industry-state peer group of 140 employers. Inspection frequency runs at the 78th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ADVANCED TELEMETRY SYSTEMS INC appears in OSHA workplace safety and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
33% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 1 distinct standard shown · 1 citation in this view.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 5206.070001 | 1 | 1 | — | May 1992 | May 1992 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3345 within MN. Peer group: 140 employers. This establishment has 1 OSHA violation; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 44 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ADVANCED TELEMETRY SYSTEMS INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ADVANCED TELEMETRY SYSTEMS INC 470 1ST AVE N · ISANTI, MN, 55040 | RCRA | No Violation Identified | 0 | 0 | — | Jun 2005 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
CPSC product recalls
Top hazard: The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.. Most recent recall: 2011-09-22. Source: Consumer Product Safety Commission, matched on company name.
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 334220 - RADIO AND TELEVISION BROADCASTING AND WIRELESS COMMUNICATIONS EQUIPMENT MANUFACTURING. Last action: 2026-06-26. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-12-05 | Planned | 0 | — | $0 | |
| 2008-11-20 | Planned | 0 | — | $0 | |
| 1992-02-13 | Referral | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturing within MN, ordered by federal enforcement volume:
- HONEYWELL AEROSPACE MINNEAPOLISMINNEAPOLIS — 2 federal enforcement records
- IDEAL AEROSMITH INCE GRAND FORKS — 1 federal enforcement record
- SL MONTEVIDEO TECHNOLOGY, INC.MONTEVIDEO — 1 federal enforcement record
Related searches
- Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Search, Detection, Navigation, in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ADVANCED TELEMETRY SYSTEMS INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ADVANCED TELEMETRY SYSTEMS INC's OSHA violation history?
- ADVANCED TELEMETRY SYSTEMS INC has 3 OSHA inspections on record with 1 violation and $0 in total penalties.
- How does ADVANCED TELEMETRY SYSTEMS INC's safety record compare to its industry?
- ADVANCED TELEMETRY SYSTEMS INC operates in the search, detection, navigation, guidance, aeronautical, and nautical system and instrument manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 0.5. ADVANCED TELEMETRY SYSTEMS INC's self-reported DART rate is 0 compared to an industry average of 0.4.