Skip to main content

Establishment profile

YOUNG GALVANIZING, INC.

8281 MERCER STREET, PULASKI, PA, 16143
332812Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

Download as PDF →

OSHA inspections
21
over 50 years
Violations
124
$55,050 in penalties
SVEP
YES
Severe violator program
Violations across 3 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 hospitalizations · 10 National Emphasis Program inspections · 6 OSHA follow-ups

Summary

YOUNG GALVANIZING, INC. has accumulated 124 OSHA violations across 21 inspections over 50 years of recorded history, with $55,050 in total assessed penalties.

The establishment sits in the 100th percentile for violations within its industry-state peer group of 284 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 3 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

YOUNG GALVANIZING, INC. appears in OSHA workplace safety, EPA environmental compliance, NLRB labor relations, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
21
0.4 / yr · last 50 yrs
Violations
124
2.5 / yr
Penalties
$55,050
$444 avg / violation
77% serious23% other
Inspection trigger · planned
12 of 21
Inspection trigger · complaint
8 of 21

76% of inspections at this establishment produced violations, with 13 inspections producing serious-or-greater violations.

Peer comparison

100th

Worse on violations than nearly every other employer in NAICS 3328 within PA. Peer group: 284 employers. This establishment has 124 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
99th
peer median: $1,359
Inspection frequency
100th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
17.4
vs industry
+14.2
TRIR
22.6
vs industry
+18.5

Reported for 101 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
3.1
BLS SOII 2024
Self-reported TRIR
22.6
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
12
Complaint
8
Referral
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Sep 2020

Reports
1
Hospitalizations
0
Amputations
1
Eye losses
0

Most frequent event: Struck by falling object or equipment, n.e.c.

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Sep 30, 2020Struck by falling object or equipment, n.e.c.Leg(s), unspecifiedAmputation

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Sep 30, 2020Attachment Hook,Beam,Crane,Dip Tank,Falling Object,Fracture,Laborer,Leg,Lost Control,Metal,Pendant Control,Rigging,Struck By,Tandem Lift,Unsafe Position,Unstable Load,Zinc Plating11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for YOUNG GALVANIZING, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for YOUNG GALVANIZING, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

Company-level in PA — for YOUNG GALVANIZING, INC., not this location alone

Total cases
2
Unfair labor practice
2

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other YOUNG GALVANIZING, INC. locations in the same state.

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for YOUNG GALVANIZING, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

EPA inspections
3
Quarters non-compliant
1

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.

Motor carrier safety (FMCSA)

DOT number
366498
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for YOUNG GALVANIZING, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2022-12-22Complaint11$2,700
2022-12-22Planned0$0
2021-02-24Planned31$3,900
2020-11-12Planned54$5,800
2020-10-05Referral21$9,875
2017-09-08Complaint22$1,950
2017-06-08Complaint11$2,600
2012-11-08Planned0$0
2012-10-11Planned21$2,900
2007-02-26Planned65$7,000
2006-01-11Complaint2828$8,213
2006-01-11Complaint2725$3,484
2002-05-20Planned76$1,500
2002-05-20Planned1919$4,803
1999-08-30Planned0$0
1982-05-07Planned71$150
1978-02-22Complaint0$0
1977-12-16Complaint9$0
1976-12-03Complaint1$0
1976-02-13Planned0$0
1975-12-04Planned4$175

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within PA, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on YOUNG GALVANIZING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is YOUNG GALVANIZING, INC.'s OSHA violation history?
YOUNG GALVANIZING, INC. has 21 OSHA inspections on record with 124 violations and $55,050 in total penalties.
How does YOUNG GALVANIZING, INC.'s safety record compare to its industry?
YOUNG GALVANIZING, INC. operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. YOUNG GALVANIZING, INC.'s self-reported DART rate is 17.35 compared to an industry average of 3.1.