Establishment profile
WISCONSIN GEAR AND MACHINE WORKS
2269 SHAWANO AVE, GREEN BAY, WI, 54303
332710 — Machine Shops
Summary
WISCONSIN GEAR AND MACHINE WORKS has accumulated 25 OSHA violations across 7 inspections over 46 years of recorded history, with $973 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 385 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WISCONSIN GEAR AND MACHINE WORKS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 25 citations in this view · $973 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 4 | 4 | $100 | Jan 1980 | Apr 2008 |
| 29 CFR 1910.0215 A02 | 3 | 3 | $200 | Jan 1980 | Jan 1989 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $410 | Jan 1989 | Nov 2003 |
| 29 CFR 1910.0219 E01 I | 2 | 2 | — | Jan 1980 | Feb 1983 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $263 | Nov 2003 | Nov 2003 |
| 29 CFR 1910.0037 F01 | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0304 A02 | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0304 F04 | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0305 B02 | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | — | Jan 1989 | Jan 1989 |
| 29 CFR 1910.0219 D01 | 1 | 1 | — | Feb 1983 | Feb 1983 |
| 29 CFR 1910.0178 P01 | 1 | 1 | — | Feb 1983 | Feb 1983 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Feb 1983 | Feb 1983 |
| 29 CFR 1910.0252 A02 IVC | 1 | 1 | — | Jan 1980 | Jan 1980 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | — | Jan 1980 | Jan 1980 |
| 29 CFR 1910.0219 F01 | 1 | 1 | — | Jan 1980 | Jan 1980 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within WI. Peer group: 385 employers. This establishment has 25 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WISCONSIN GEAR AND MACHINE WORKS. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-04-04 | Planned | 1 | — | $0 | |
| 2003-10-31 | Planned | 2 | 2 | $473 | |
| 1989-02-15 | Follow-up | 0 | — | $0 | |
| 1988-12-21 | Complaint | 10 | 2 | $500 | |
| 1983-02-03 | Planned | 6 | — | $0 | |
| 1980-04-24 | Follow-up | 0 | — | $0 | |
| 1979-12-18 | Planned | 6 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within WI, ordered by federal enforcement volume:
- HYPRO INC.WATERFORD — 2 federal enforcement records
- TED GROB CORPORATIONGRAFTON — 2 federal enforcement records
- MILLENNIUM TECHNOLOGIES, LLCPLYMOUTH — 2 federal enforcement records
- DYNATECT MANUFACTURING, INC.NEW BERLIN — 2 federal enforcement records
- V & L TOOL, LLCWAUKESHA — 2 federal enforcement records
- MILLER MACHINED PRODUCTS, INC.ENDEAVOR — 2 federal enforcement records
- INNOVATIVE MACHINING LLCNEENAH — 2 federal enforcement records
- HYPRO INCORPORATEDBERLIN — 2 federal enforcement records
- SUSSEK MACHINE COMPANY, LLCWATERLOO — 2 federal enforcement records
- REXNORD INCMilwaukee — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in WIState-wide enforcement data
- Machine Shops in WIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WISCONSIN GEAR AND MACHINE WORKS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WISCONSIN GEAR AND MACHINE WORKS's OSHA violation history?
- WISCONSIN GEAR AND MACHINE WORKS has 7 OSHA inspections on record with 25 violations and $972.5 in total penalties.
- How does WISCONSIN GEAR AND MACHINE WORKS's safety record compare to its industry?
- WISCONSIN GEAR AND MACHINE WORKS operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.