Establishment profile
WHITE TOOL CORP
1489 O'ROURKE BLVD, GAYLORD, MI, 49735
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
WHITE TOOL CORP has accumulated 25 OSHA violations across 5 inspections over 33 years of recorded history, with $425 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 1,107 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 22 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WHITE TOOL CORP appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $425 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 4081.215401 | 2 | 2 | $150 | Jun 1993 | Feb 2004 |
| 29 CFR 4081.072701 | 1 | 1 | $113 | Sep 2002 | Sep 2002 |
| 29 CFR 4081.263501 B | 1 | 1 | $113 | Sep 2002 | Sep 2002 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $50 | Feb 2004 | Feb 2004 |
| 29 CFR 4081.022101 | 1 | 1 | — | Feb 2004 | Feb 2004 |
| 29 CFR 4081.063201 | 1 | 1 | — | Feb 2004 | Feb 2004 |
| 29 CFR 1910.0304 F05 VC1 | 1 | 1 | — | Feb 2004 | Feb 2004 |
| 29 CFR 4081.400704 | 1 | 1 | — | Feb 2004 | Feb 2004 |
| 29 CFR 4081.187202 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 1910.0110 F02 II | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 1910.0305 B02 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.003601 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.184301 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.185401 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.262202 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.492301 | 1 | 1 | — | Sep 2002 | Sep 2002 |
| 29 CFR 4081.264801 | 1 | 1 | — | Jan 1998 | Jan 1998 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within MI. Peer group: 1,107 employers. This establishment has 25 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for WHITE TOOL CORP. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WHITE TOOL CORP. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 22+ years. Most recent activity: 22 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WHITE TOOL CORP. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WHITE TOOL CORP. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WHITE TOOL CORP. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WHITE TOOL CORP. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WHITE TOOL CORP. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-12-11 | Complaint | 1 | — | $0 | |
| 2003-12-11 | Planned | 5 | 1 | $50 | |
| 2002-06-24 | Planned | 13 | 2 | $225 | |
| 1997-12-10 | Planned | 2 | — | $0 | |
| 1993-05-24 | Planned | 4 | 1 | $150 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MI, ordered by federal enforcement volume:
- QUALITY METALCRAFT INCLIVONIA — 3 federal enforcement records
- AUTODIE INTERNATIONAL INCGRAND RAPIDS — 3 federal enforcement records
- EXCO EXTRUSION DIES INCCHESTERFIELD — 3 federal enforcement records
- MARTINREA FABCO HOT STAMPING INCDETROIT — 3 federal enforcement records
- OVIDON MFG LLCHOWELL — 2 federal enforcement records
- NORTHERN MACHINE TOOL COMPANYMUSKEGON — 2 federal enforcement records
- OTTAWA GAGE INCHOLLAND — 2 federal enforcement records
- ETM ENTERPRISES INCGRAND LEDGE — 2 federal enforcement records
- MODELS & TOOLS INCSHELBY TOWNSHIP — 2 federal enforcement records
- BAKER INDUSTRIES, INC.MACOMB — 2 federal enforcement records
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MIState-wide enforcement data
- Special Die and in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WHITE TOOL CORP from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WHITE TOOL CORP's OSHA violation history?
- WHITE TOOL CORP has 5 OSHA inspections on record with 25 violations and $425 in total penalties.
- How does WHITE TOOL CORP's safety record compare to its industry?
- WHITE TOOL CORP operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.