Establishment profile
WEST END MACHINE & WELDING INC
6804 SCHOOL AVE, RICHMOND, VA, 23228
332710 — Machine Shops
Summary
WEST END MACHINE & WELDING INC has accumulated 25 OSHA violations across 3 inspections over 23 years of recorded history, with $1,125 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 172 employers. Inspection frequency runs at the 60th percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
WEST END MACHINE & WELDING INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $1,125 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 A04 | 2 | 2 | $270 | Dec 2002 | Sep 2009 |
| 29 CFR 1910.0215 B09 | 2 | 2 | — | Dec 2002 | Sep 2009 |
| 29 CFR 1910.0157 C04 | 1 | 1 | $180 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0037 B06 | 1 | 1 | $135 | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0253 B02 IV | 1 | 1 | $135 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $135 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0101 B | 1 | 1 | $135 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0212 B | 1 | 1 | $135 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0334 A02 II | 1 | 1 | — | Jul 2017 | Jul 2017 |
| 29 CFR 1910.1030 C01 I | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.1052 L01 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.1200 E04 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0157 G01 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0134 D01 III | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.1052 D02 | 1 | 1 | — | Sep 2009 | Sep 2009 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0212 A01 | 1 | 1 | — | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0023 C01 | 1 | 1 | — | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Dec 2002 | Dec 2002 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within VA. Peer group: 172 employers. This establishment has 25 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for WEST END MACHINE & WELDING INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WEST END MACHINE & WELDING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for WEST END MACHINE & WELDING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for WEST END MACHINE & WELDING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for WEST END MACHINE & WELDING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WEST END MACHINE & WELDING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for WEST END MACHINE & WELDING INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for WEST END MACHINE & WELDING INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-06-01 | Planned | 1 | — | $0 | |
| 2009-09-11 | Planned | 11 | 5 | $450 | |
| 2002-11-25 | Planned | 13 | 6 | $675 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within VA, ordered by federal enforcement volume:
- C & L MACHINE & WELDING, INC.AMELIA COURT HOUSE — 2 federal enforcement records
- THERMAL SPRAY SOLUTIONS, INC.CHESAPEAKE — 2 federal enforcement records
- AMTECHGRAFTON — 2 federal enforcement records
- ATLANTIC METAL PRODUCTS, INC.TOPPING — 2 federal enforcement records
- MACHINE SPECIALTIES, INC.ASHLAND — 1 federal enforcement record
- INDUSTRIAL MACHINE WORKS, INC.WAYNESBORO — 1 federal enforcement record
- K-FORM, INCORPORATEDSTERLING — 1 federal enforcement record
- WORTHAM MACHINE & WELDING, INC.KENBRIDGE — 1 federal enforcement record
- RAYCO INDUSTRIES INCRICHMOND — 1 federal enforcement record
- CRANE RESEARCH & ENGINEERING CO., INC.HAMPTON — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in VAState-wide enforcement data
- Machine Shops in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on WEST END MACHINE & WELDING INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is WEST END MACHINE & WELDING INC's OSHA violation history?
- WEST END MACHINE & WELDING INC has 3 OSHA inspections on record with 25 violations and $1,125 in total penalties.
- How does WEST END MACHINE & WELDING INC's safety record compare to its industry?
- WEST END MACHINE & WELDING INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.