Skip to main content

Establishment profile

WEST COAST METAL FINISHING CO

5722 BANDERA ST, LOS ANGELES, CA, 90058
332813Electroplating, Plating, Polishing, Anodizing, and Coloring

Download as PDF →

OSHA inspections
3
over 28 years
Violations
26
$25,025 in penalties
Penalties
$25,025
$963 avg
Accident investigations on record
1 fatality

Summary

WEST COAST METAL FINISHING CO has accumulated 26 OSHA violations across 3 inspections over 28 years of recorded history, with $25,025 in total assessed penalties.

The establishment sits in the 93rd percentile for violations within its industry-state peer group of 353 employers. Inspection frequency runs at the 80th percentile. The most recent enforcement activity was recorded 19 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

WEST COAST METAL FINISHING CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.1 / yr · last 28 yrs
Violations
26
0.9 / yr
Penalties
$25,025
$963 avg / violation
27% serious73% other
Inspection trigger · complaint
2 of 3
Inspection trigger · accident
1 of 3

100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $24,495 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 2340.002422$260Oct 1998Dec 2004
3480 C11$14,400Jun 2007Jun 2007
5162 E11$1,800Dec 2004Dec 2004
5154 J0111$1,800Dec 2004Dec 2004
3368 B11$1,800Dec 2004Dec 2004
342 A11$1,000Jun 2007Jun 2007
29 CFR 2340.002311$560Oct 1998Oct 1998
461 C11$275Dec 2004Dec 2004
3214 B11$275Dec 2004Dec 2004
3203 B11$275Dec 2004Dec 2004
461 A11$225Oct 1998Oct 1998
29 CFR 2510.0058 A11$205Dec 2004Dec 2004
6151 C0111$205Dec 2004Dec 2004
3650 S0711$205Dec 2004Dec 2004
29 CFR 2340.0016 A11$205Dec 2004Dec 2004
29 CFR 2500.002511$205Dec 2004Dec 2004
29 CFR 1430.0032 A0111$200Dec 2004Dec 2004
29 CFR 2340.0022 A11$200Dec 2004Dec 2004
3660 A11$200Dec 2004Dec 2004
4650 D11$200Dec 2004Dec 2004

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

93rd

Worse on violations than most other employers in NAICS 3328 within CA. Peer group: 353 employers. This establishment has 26 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
93rd
peer median: $2,230
Inspection frequency
80th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−2.3
TRIR
0.0
vs industry
−4.1

Reported for 28 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
2.3
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Complaint
2
Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for WEST COAST METAL FINISHING CO. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Feb 7, 2007BURN,MAINTENANCE,LIFELINE,PPE,METAL SHOP,LADDER,FALL,FALL PROTECTION,TANK,UNGUARDEDFatality11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
19 years ago

No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for WEST COAST METAL FINISHING CO. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for WEST COAST METAL FINISHING CO. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for WEST COAST METAL FINISHING CO. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for WEST COAST METAL FINISHING CO. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for WEST COAST METAL FINISHING CO. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
WEST COAST METAL FINISHING
5722 BANDERA ST · LOS ANGELES, CA, 90058
WaterRCRANo Violation Identified00Jun 2021View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Inspection history

DateTriggerViolationsSeriousPenalty
2007-02-09Accident21$15,400
2004-07-20Complaint204$8,785
1998-07-09Complaint42$840

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in electroplating, plating, polishing, anodizing, and coloring within CA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on WEST COAST METAL FINISHING CO from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is WEST COAST METAL FINISHING CO's OSHA violation history?
WEST COAST METAL FINISHING CO has 3 OSHA inspections on record with 26 violations and $25,025 in total penalties.
How does WEST COAST METAL FINISHING CO's safety record compare to its industry?
WEST COAST METAL FINISHING CO operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. WEST COAST METAL FINISHING CO's self-reported DART rate is 0 compared to an industry average of 2.3.
Has WEST COAST METAL FINISHING CO had any workplace fatalities?
Yes. Federal records show 1 fatality investigation involving WEST COAST METAL FINISHING CO.