Establishment profile
VENTAIRE CORPORATION
4345 S. 93RD E. AVE., TULSA, OK, 74145
332322 — Sheet Metal Work Manufacturing
Summary
VENTAIRE CORPORATION has accumulated 39 OSHA violations across 4 inspections over 43 years of recorded history, with $2,675 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 300 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
VENTAIRE CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $2,675 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 2 | 2 | $150 | Aug 1983 | Nov 1990 |
| 29 CFR 1910.0107 C06 | 1 | 1 | $357 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0254 D03 | 1 | 1 | $357 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0252 A02 VIC | 1 | 1 | $357 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0134 C | 1 | 1 | $357 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0213 B03 | 1 | 1 | $357 | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $150 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.0147 C05 I | 1 | 1 | $150 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.1200 H | 1 | 1 | $75 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $75 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $75 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.1025 C01 | 1 | 1 | $60 | Jan 1984 | Jan 1984 |
| 29 CFR 1910.1025 J01 I | 1 | 1 | $60 | Jan 1984 | Jan 1984 |
| 29 CFR 1910.1025 D02 | 1 | 1 | $60 | Jan 1984 | Jan 1984 |
| 29 CFR 1910.0179 G01 V | 1 | 1 | $35 | Nov 1990 | Nov 1990 |
| 29 CFR 1910.0107 E02 | 1 | 1 | — | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0213 H01 | 1 | 1 | — | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0213 I01 | 1 | 1 | — | Aug 2003 | Aug 2003 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Aug 2003 | Aug 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3323 within OK. Peer group: 300 employers. This establishment has 39 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for VENTAIRE CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for VENTAIRE CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for VENTAIRE CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for VENTAIRE CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for VENTAIRE CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for VENTAIRE CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for VENTAIRE CORPORATION. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-07-10 | Planned | 11 | 11 | $1,785 | |
| 1990-10-18 | Planned | 13 | 8 | $660 | |
| 1983-11-02 | Planned | 11 | 5 | $180 | |
| 1983-08-18 | Planned | 4 | 1 | $50 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within OK, ordered by federal enforcement volume:
- RUSSELECTRIC INC.BROKEN ARROW — 2 federal enforcement records
- METAL PANELS, INC.TULSA — 2 federal enforcement records
- MIDWEST PRECISION INC.TULSA — 2 federal enforcement records
- MUSKOGEE METAL FABRICATORS, INC.MUSKOGEE — 1 federal enforcement record
- B & M METAL WORKSCATOOSA — 1 federal enforcement record
- HOLMBOE MANUFACTURING CO.OKLAHOMA CITY — 1 federal enforcement record
- CENTRAL EXPANDED METAL, LLCCHANDLER — 1 federal enforcement record
- D & D DESIGN MANUFACTURING INC.OKLAHOMA CITY — 1 federal enforcement record
- FIRST PROCESS STEEL, INC.TULSA — 1 federal enforcement record
- STEEL SERVICE BLDG. CO.CLAREMORE — 1 federal enforcement record
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in OKState-wide enforcement data
- Sheet Metal Work in OKIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on VENTAIRE CORPORATION from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is VENTAIRE CORPORATION's OSHA violation history?
- VENTAIRE CORPORATION has 4 OSHA inspections on record with 39 violations and $2,675 in total penalties.
- How does VENTAIRE CORPORATION's safety record compare to its industry?
- VENTAIRE CORPORATION operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3.