Establishment profile
UNITED TOOL & MOLD INC
130 PARKWAY WEST, DUNCAN, SC, 29334
333511 — Industrial Mold Manufacturing
Summary
UNITED TOOL & MOLD INC has accumulated 11 OSHA violations across 2 inspections over 15 years of recorded history, with $3,088 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 146 employers. Inspection frequency runs at the 46th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNITED TOOL & MOLD INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 11 citations in this view · $3,088 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $888 | Nov 2010 | Feb 2014 |
| 29 CFR 1001.2 A | 1 | 1 | $438 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | $438 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $263 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $263 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0334 A01 | 1 | 1 | $250 | Feb 2014 | Feb 2014 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $250 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $150 | Feb 2014 | Feb 2014 |
| 29 CFR 1910.0334 A03 II | 1 | 1 | $150 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0304 A02 | 1 | 1 | — | Nov 2010 | Nov 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within SC. Peer group: 146 employers. This establishment has 11 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 22 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNITED TOOL & MOLD INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNITED TOOL & MOLD INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNITED TOOL & MOLD INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNITED TOOL & MOLD INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNITED TOOL & MOLD INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNITED TOOL & MOLD INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-12-17 | Planned | 3 | 3 | $1,025 | |
| 2010-10-13 | Planned | 8 | 7 | $2,063 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial mold manufacturing within SC, ordered by federal enforcement volume:
- PROPER POLYMERSANDERSON — 1 federal enforcement record
- JM MOLD SOUTH INCEASLEY — 1 federal enforcement record
- MOLD CLINICWEST UNION — 1 federal enforcement record
- ADVANCED MOLD TECHNOLOGYBEAUFORT — 0 federal enforcement records
Related searches
- Industrial Mold ManufacturingAll employers in this industry
- Employers in SCState-wide enforcement data
- Industrial Mold Manufacturing in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNITED TOOL & MOLD INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNITED TOOL & MOLD INC's OSHA violation history?
- UNITED TOOL & MOLD INC has 2 OSHA inspections on record with 11 violations and $3,087.5 in total penalties.
- How does UNITED TOOL & MOLD INC's safety record compare to its industry?
- UNITED TOOL & MOLD INC operates in the industrial mold manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1. UNITED TOOL & MOLD INC's self-reported DART rate is 0 compared to an industry average of 1.6.