Establishment profile
UNITED TOOL AND STAMPING INC
6 ANDREWS DRIVE, WOODLAND PARK, NJ, 07424
333517 — Machine Tool Manufacturing
Summary
UNITED TOOL AND STAMPING INC has accumulated 46 OSHA violations across 11 inspections over 47 years of recorded history, with $12,400 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 56 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNITED TOOL AND STAMPING INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
64% of inspections at this establishment produced violations, with 7 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 30 citations in this view · $12,400 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 C02 IA | 4 | 4 | $940 | Aug 1978 | Feb 1994 |
| 29 CFR 1904.0002 A | 3 | 3 | $350 | Sep 1982 | Feb 1994 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $2,450 | May 2000 | Aug 2013 |
| 29 CFR 1910.0157 G01 | 2 | 2 | $670 | Feb 1994 | May 2000 |
| 29 CFR 1910.0110 E04 III | 2 | 2 | $400 | Feb 1994 | May 2000 |
| 29 CFR 1910.0215 B09 | 2 | 2 | $400 | Oct 1984 | Feb 1994 |
| 29 CFR 1910.0022 A01 | 2 | 2 | — | Aug 1978 | Sep 1982 |
| 29 CFR 1910.0110 E04 III | 1 | 1 | $2,000 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0219 B02 | 1 | 1 | $630 | May 2000 | May 2000 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $560 | Jan 1979 | Jan 1979 |
| 29 CFR 1910.1200 H | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0157 E03 | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0178 K01 | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0212 B | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.0253 B02 II | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $400 | Feb 1994 | Feb 1994 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within NJ. Peer group: 56 employers. This establishment has 46 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNITED TOOL AND STAMPING INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNITED TOOL AND STAMPING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNITED TOOL AND STAMPING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNITED TOOL AND STAMPING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNITED TOOL AND STAMPING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNITED TOOL AND STAMPING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNITED TOOL AND STAMPING INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
UNITED TOOL & STAMPING CO CORP 6 ANDREWS DR · WEST PATERSON, NJ, 07424 | RCRA | No Violation Identified | 0 | 0 | — | Aug 2006 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for UNITED TOOL AND STAMPING INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-05-28 | Complaint | 2 | 2 | $4,000 | |
| 2002-08-21 | Follow-up | 0 | — | $0 | |
| 2000-04-26 | Planned | 6 | 3 | $1,350 | |
| 1994-06-08 | Follow-up | 0 | — | $0 | |
| 1994-01-19 | Planned | 22 | 19 | $5,950 | |
| 1984-10-22 | Planned | 4 | 1 | $180 | |
| 1982-08-26 | Planned | 8 | 1 | $200 | |
| 1979-06-29 | Follow-up | 0 | — | $0 | |
| 1979-01-10 | Planned | 2 | 2 | $560 | |
| 1978-10-11 | Follow-up | 0 | — | $0 | |
| 1978-08-08 | Complaint | 2 | 1 | $160 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine tool manufacturing within NJ, ordered by federal enforcement volume:
- HEXACON ELECTRIC COMPANYROSELLE PARK — 1 federal enforcement record
- EP HELLER COMPANYMADISON — 1 federal enforcement record
Related searches
- Machine Tool ManufacturingAll employers in this industry
- Employers in NJState-wide enforcement data
- Machine Tool Manufacturing in NJIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNITED TOOL AND STAMPING INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNITED TOOL AND STAMPING INC's OSHA violation history?
- UNITED TOOL AND STAMPING INC has 11 OSHA inspections on record with 46 violations and $12,400 in total penalties.
- How does UNITED TOOL AND STAMPING INC's safety record compare to its industry?
- UNITED TOOL AND STAMPING INC operates in the machine tool manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.3.