Summary
UNIQUE TOOL & MFG CO INC has accumulated 37 OSHA violations across 5 inspections over 27 years of recorded history, with $6,570 in total assessed penalties.
The establishment sits in the 78th percentile for violations within its industry-state peer group of 258 employers. Inspection frequency runs at the 73rd percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
UNIQUE TOOL & MFG CO INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 24 citations in this view · $6,570 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 4081.246303 E | 2 | 2 | $900 | Jun 2007 | Nov 2012 |
| 29 CFR 4081.246101 | 2 | 2 | $750 | Nov 2005 | Nov 2012 |
| 29 CFR 4081.331201 | 2 | 2 | $525 | May 1999 | Jun 2007 |
| 29 CFR 4081.247701 | 2 | 2 | $375 | Nov 2005 | Jun 2007 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $375 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.246102 A | 1 | 1 | $375 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.261702 | 1 | 1 | $375 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.247704 | 1 | 1 | $375 | Nov 2005 | Nov 2005 |
| 29 CFR 4081.2471 B | 1 | 1 | $375 | Nov 2005 | Nov 2005 |
| 29 CFR 4081.241201 | 1 | 1 | $375 | Nov 2005 | Nov 2005 |
| 29 CFR 4081.247705 | 1 | 1 | $375 | Nov 2005 | Nov 2005 |
| 29 CFR 4081.2637 | 1 | 1 | $300 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.072701 | 1 | 1 | $240 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.0716 | 1 | 1 | $225 | Jun 2007 | Jun 2007 |
| 29 CFR 4081.2471 C | 1 | 1 | $225 | Jun 2007 | Jun 2007 |
| 29 CFR 4081.244201 | 1 | 1 | $225 | Jun 2007 | Jun 2007 |
| 29 CFR 4081.263502 A | 1 | 1 | $180 | Nov 2012 | Nov 2012 |
| 29 CFR 4081.263101 | 1 | 1 | — | Nov 2012 | Nov 2012 |
| 40801014JJ | 1 | 1 | — | Nov 2012 | Nov 2012 |
| 29 CFR 4081.018701 | 1 | 1 | — | Nov 2012 | Nov 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within MI. Peer group: 258 employers. This establishment has 37 OSHA violations; peer median is 11.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for UNIQUE TOOL & MFG CO INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for UNIQUE TOOL & MFG CO INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for UNIQUE TOOL & MFG CO INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for UNIQUE TOOL & MFG CO INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for UNIQUE TOOL & MFG CO INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for UNIQUE TOOL & MFG CO INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for UNIQUE TOOL & MFG CO INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
UNIQUE TOOL & MFG INC 100 REED DR · TEMPERANCE, MI, 48182 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for UNIQUE TOOL & MFG CO INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-10-15 | Planned | 22 | 10 | $2,595 | |
| 2007-04-11 | Follow-up | 0 | — | $0 | |
| 2007-04-11 | Planned | 6 | 6 | $1,425 | |
| 2005-10-06 | Programmed Related | 6 | 6 | $2,250 | |
| 1999-04-23 | Complaint | 3 | 1 | $300 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within MI, ordered by federal enforcement volume:
- ALLIED METALS CORPORATIONTROY — 3 federal enforcement records
- MRM INDUSTRIES INCOWOSSO — 2 federal enforcement records
- LAPEER METAL STAMPING CO INCMT CLEMENS — 2 federal enforcement records
- LAPEER METAL STAMPING CO INCDEARBORN — 2 federal enforcement records
- ChryslerSterling Heights — 2 federal enforcement records
- METALDYNE LLCFARMINGTON HILLS — 2 federal enforcement records
- CHALLENGE MANUFACTURING COMPANYHOLLAND — 2 federal enforcement records
- MARSHALL METAL PRODUCTS INCMARSHALL — 1 federal enforcement record
- NISSIA METAL BLANKING INCHOWELL — 1 federal enforcement record
- SHERWOOD PROTOTYPE INCHIGHLAND PARK — 1 federal enforcement record
Related searches
- NAICS 332All employers in this industry
- Employers in MIState-wide enforcement data
- Industry in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on UNIQUE TOOL & MFG CO INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is UNIQUE TOOL & MFG CO INC's OSHA violation history?
- UNIQUE TOOL & MFG CO INC has 5 OSHA inspections on record with 37 violations and $6,570 in total penalties.