Establishment profile
U.S. MACHINE & TOOL COMPANY, INC.
150 SHAMROCK INDUDTRIAL BLVD., TYRONE, GA, 30290
EIN 811012841
Summary
U.S. MACHINE & TOOL COMPANY, INC. has accumulated 22 OSHA violations across 3 inspections over 18 years of recorded history, with $17,318 in total assessed penalties.
The establishment sits in the 84th percentile for violations within its industry-state peer group of 46 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
U.S. MACHINE & TOOL COMPANY, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $17,318 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C04 IIB | 1 | 1 | $2,695 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $2,695 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0217 B06 I | 1 | 1 | $1,400 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,400 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0036 D01 | 1 | 1 | $1,000 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $1,000 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $1,000 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,000 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.1200 H | 1 | 1 | $982 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $982 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | $982 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $982 | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $400 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $400 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0253 B02 II | 1 | 1 | $400 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0147 C07 IV | 1 | 1 | — | Nov 2011 | Nov 2011 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0305 G01 IIIA | 1 | 1 | — | Jun 2008 | Jun 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3321 within GA. Peer group: 46 employers. This establishment has 22 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 35 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2016
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 23, 2016 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for U.S. MACHINE & TOOL COMPANY, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-11-30 | Planned | 0 | — | $0 | |
| 2011-07-14 | Complaint | 8 | 8 | $9,318 | |
| 2008-02-27 | Complaint | 14 | 14 | $8,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within GA, ordered by federal enforcement volume:
- FANELLO INDUSTRIES INCLAVONIA — 2 federal enforcement records
- LIPPERT COMPONENTS, INC.FITZGERALD — 2 federal enforcement records
- SATELLITE MANUFACTURING, INC.PENDERGRASS — 2 federal enforcement records
- ELIXIR INDUSTRIES, INC.FITZGERALD — 1 federal enforcement record
- EVANS TOOL & DIE, INC.CONYERS — 1 federal enforcement record
- NAKINISHI MANUFACTURING CORPORATIONWINTERVILLE — 1 federal enforcement record
- THE NEWARK GROUP NEWARK PAPERBOARD PRODUCTSATLANTA — 1 federal enforcement record
- STEMCO KAISER INCORPORATEDROME — 1 federal enforcement record
- METAL SPINNERS INC.JASPER — 1 federal enforcement record
- FUSSELL SHEET METAL WORKS INC.MORROW — 1 federal enforcement record
Related searches
- NAICS 332All employers in this industry
- Employers in GAState-wide enforcement data
- Industry in GAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on U.S. MACHINE & TOOL COMPANY, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is U.S. MACHINE & TOOL COMPANY, INC.'s OSHA violation history?
- U.S. MACHINE & TOOL COMPANY, INC. has 3 OSHA inspections on record with 22 violations and $17,318 in total penalties.