Establishment profile
TURNER & SEYMOUR MFG. CO.
100 LAWTON STREET, TORRINGTON, CT, 06790
Summary
TURNER & SEYMOUR MFG. CO. has accumulated 142 OSHA violations across 8 inspections over 53 years of recorded history, with $5,375 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 25,053 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 40 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TURNER & SEYMOUR MFG. CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 33 citations in this view · $3,955 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0132 A | 3 | 2 | $280 | May 1982 | May 1982 |
| 29 CFR 1910.0133 A01 | 3 | 2 | $280 | Apr 1982 | May 1982 |
| 29 CFR 1910.0022 A01 | 3 | 3 | $45 | Nov 1972 | May 1982 |
| 29 CFR 1910.0134 A02 | 2 | 1 | $400 | May 1982 | May 1982 |
| 29 CFR 1910.0023 C01 | 2 | 2 | $280 | May 1982 | May 1982 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $150 | Nov 1972 | May 1982 |
| 29 CFR 1910.0176 B | 2 | 2 | $80 | Nov 1972 | May 1982 |
| 29 CFR 1910.0242 B | 2 | 2 | $45 | Nov 1972 | May 1982 |
| 29 CFR 1910.0179 G02 I | 2 | 2 | $35 | Nov 1972 | May 1982 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | — | Oct 1974 | May 1982 |
| 29 CFR 1910.0179 N03 V | 1 | 1 | $700 | Nov 1972 | Nov 1972 |
| 29 CFR 1910.0179 G06 | 1 | 1 | $360 | May 1982 | May 1982 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $360 | May 1982 | May 1982 |
| 29 CFR 1910.0095 A | 1 | 1 | $320 | May 1982 | May 1982 |
| 29 CFR 1910.0028 A01 | 1 | 1 | $160 | May 1982 | May 1982 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $140 | May 1982 | May 1982 |
| 29 CFR 1910.0095 L04 | 1 | 1 | $80 | May 1982 | May 1982 |
| 29 CFR 1910.0095 L05 | 1 | 1 | $80 | May 1982 | May 1982 |
| 29 CFR 1910.1001 C02 I | 1 | 1 | $80 | May 1982 | May 1982 |
| 29 CFR 1910.1001 F01 | 1 | 1 | $80 | May 1982 | May 1982 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 25,053 employers. This establishment has 142 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TURNER & SEYMOUR MFG. CO.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TURNER & SEYMOUR MFG. CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 40+ years. Most recent activity: 40 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TURNER & SEYMOUR MFG. CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TURNER & SEYMOUR MFG. CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TURNER & SEYMOUR MFG. CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TURNER & SEYMOUR MFG. CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TURNER & SEYMOUR MFG. CO.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TURNER & SEYMOUR MFG. CO.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-01-12$37,700
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDALL-S3-10-3151-3OM.contract · Last action 2010-08-31$32,200
- General Services AdministrationTABLE MOUNTED CAN OPENER, IAW COMMERCIAL ITEM DESCRIPTION (CID) A-A-52206C DATED 2/22/2008. SHALL HAVE THE FOLLOWING CHARACTERISTICS: TYPE III TABLE MOUNTED, HEAVY DUTY, WITH CUTTING WHEEL GRADE A - STANDARD COMMERCIAL QUALITY NOTE: NSF INT' L COMPLIANCE IS NOT REQUIRED. MARKING, PALLETIZATION, UNITIZATION OF PALLET LOAD SHALL BE SHALL BE IAW WITH THE ITEM PURCHASE DESCRIPTION. RFQ QSDLAA-G4-11-3151-SQ P/N 171contract · Last action 2011-05-16$24,940
- General Services AdministrationTABLE MOUNTED CAN OPENER, IAW COMMERCIAL ITEM DESCRIPTION (CID) A-A-52206C DATED 2/22/2008. SHALL HAVE THE FOLLOWING CHARACTERISTICS: TYPE III TABLE MOUNTED, HEAVY DUTY, WITH CUTTING WHEEL GRADE A - STANDARD COMMERCIAL QUALITY NOTE: NSF INT' L COMPLIANCE IS NOT REQUIRED. MARKING, PALLETIZATION, UNITIZATION OF PALLET LOAD SHALL BE SHALL BE IAW WITH THE ITEM PURCHASE DESCRIPTION. RFQ QSDLAA-G4-11-3151-SQ P/N 171contract · Last action 2011-05-16$20,880
- General Services AdministrationTABLE MOUNTED CAN OPENER, IAW COMMERCIAL ITEM DESCRIPTION (CID) A-A-52206C DATED 2/22/2008. SHALL HAVE THE FOLLOWING CHARACTERISTICS: TYPE III TABLE MOUNTED, HEAVY DUTY, WITH CUTTING WHEEL GRADE A - STANDARD COMMERCIAL QUALITY NOTE: NSF INT' L COMPLIANCE IS NOT REQUIRED. MARKING, PALLETIZATION, UNITIZATION OF PALLET LOAD SHALL BE SHALL BE IAW WITH THE ITEM PURCHASE DESCRIPTION. RFQ QSDLAA-G4-11-3151-SQ P/N 171contract · Last action 2011-05-16$20,300
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$19,992
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-10-27$17,400
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-09-01$17,400
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-11-3151-01-OM DTD 11/4/10.contract · Last action 2010-11-12$17,020
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$12,989
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-10-02$12,160
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-09-16$12,160
- General Services AdministrationTABLE MOUNTED CAN OPENER, IAW COMMERCIAL ITEM DESCRIPTION (CID) A-A-52206C DATED 2/22/2008. SHALL HAVE THE FOLLOWING CHARACTERISTICS: TYPE III TABLE MOUNTED, HEAVY DUTY, WITH CUTTING WHEEL GRADE A - STANDARD COMMERCIAL QUALITY NOTE: NSF INT' L COMPLIANCE IS NOT REQUIRED. MARKING, PALLETIZATION, UNITIZATION OF PALLET LOAD SHALL BE SHALL BE IAW WITH THE ITEM PURCHASE DESCRIPTION. RFQ QSDLAA-G4-11-3151-SQ P/N 171contract · Last action 2011-05-16$12,160
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$11,760
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-05-16$11,600
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-02-01$11,600
- General Services AdministrationTABLE MOUNTED CAN OPENER IAW RFQ QSDACEA-S3-08-3151-3 DATED 3/11/08 AND IPD DTD 3/6/08. CAN OPENERScontract · Last action 2008-03-24$11,368
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-11-3151-01-OM DTD 11/4/10.contract · Last action 2010-11-12$10,248
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2014-06-24$9,728
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-05-07$9,120
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-11-10$9,120
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-10-27$9,120
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-10-12$9,120
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-11-3151-01-OM DTD 11/4/10.contract · Last action 2010-11-12$8,296
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$7,961
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2014-06-24$6,080
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2012-09-07$6,080
- General Services AdministrationDESCR N.A.contract · Last action 2009-03-06$5,866
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$4,704
- General Services AdministrationDESCR N.A.contract · Last action 2008-08-22$4,190
- General Services AdministrationTAS::47 4534 001::TAS TABLE MOUNTED CAN OPENER IAW RFQ QSDLAA-S3-10-3151 DTD 3/17/10 AND IPD DTD 4/23/09.contract · Last action 2010-04-02$3,920
- General Services AdministrationDESCR N.A.contract · Last action 2008-07-03$3,771
- General Services AdministrationDESCR N.A.contract · Last action 2009-04-03$3,352
- General Services AdministrationTABLE MOUNTED CAN OPENER IAW RFQ QSDACEA-S3-08-3151-3 DATED 3/11/08 AND IPD DTD 3/6/08.contract · Last action 2008-03-24$3,352
- General Services AdministrationOPENER,CAN,MOUNTED: IAW CID A-A-52206B. TYPE III-TABLE MOUNTED,HEAVY DUTY,W/CUTTING WHEEL GRADE A-STANDARD COMMERCIAL QUALITY. EXCEP. TO CID: PARA. 3.1.4,TYPE III OPENER, CONSIST OF A BODY,FEED WHEEL,CUTTING WHEEL,CAN HOLDER,CRANK&KNOB,CAN GUIDE,VERTICAL SHAFT,TABLE CLAMPING BRACKET, OR SCREW ON BOLT ON TABLE BASE,&WHEN REQUIRED, MAGNETIC LID LIFTER. PACKAGED/PACKED PER ASTM D3951. MARK PER FED-STD-123 FOR GSA DEPOTS: MIL-STD-129 FOR DOD LOCATIONS. PALLET- IZATION - 48" X40" , 4-WAY, 2500# MAX, 53" HEIGHT MAX. RFQ QSDLAA-G4-11-3151-SQ TURNER&SEYMOUR P/N 171contract · Last action 2011-09-21$3,040
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2014-05-29$0
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2011-10-19$0
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2011-10-19$0
- General Services AdministrationOTHER THAN SCHEDULEcontract · Last action 2008-04-21$0
Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2014-06-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1985-10-28 | Complaint | 0 | — | $0 | |
| 1982-03-22 | Planned | 53 | 10 | $1,080 | |
| 1981-11-09 | Planned | 41 | 8 | $2,360 | |
| 1974-11-04 | Planned | 0 | — | $0 | |
| 1974-10-23 | Planned | 5 | — | $0 | |
| 1973-02-20 | Follow-up | 0 | — | $0 | |
| 1972-12-20 | Follow-up | 0 | — | $0 | |
| 1972-11-06 | Accident | 43 | 1 | $1,935 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in CTState-wide enforcement data
About this data
This profile aggregates federal enforcement records on TURNER & SEYMOUR MFG. CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TURNER & SEYMOUR MFG. CO.'s OSHA violation history?
- TURNER & SEYMOUR MFG. CO. has 8 OSHA inspections on record with 142 violations and $5,375 in total penalties.