Establishment profile
TURNER MACHINE CO., INC.
700 SWAN DR., SMYRNA, TN, 37167
333999 — All Other Miscellaneous General Purpose Machinery Manufacturing
Summary
TURNER MACHINE CO., INC. has accumulated 23 OSHA violations across 4 inspections over 18 years of recorded history, with $2,775 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 127 employers. Inspection frequency runs at the 77th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TURNER MACHINE CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $2,775 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0106 E02 IV D | 1 | 1 | $750 | May 2015 | May 2015 |
| 29 CFR 1910.0107 G02 | 1 | 1 | $750 | Jan 2009 | Jan 2009 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0151 C | 1 | 1 | $450 | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0125 E04 II | 1 | 1 | $375 | May 2015 | May 2015 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.1200 F06 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0107 E02 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0125 E05 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0107 G03 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0107 B09 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0107 C05 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 1910.0107 G07 | 1 | 1 | — | May 2015 | May 2015 |
| 29 CFR 9000.704 | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 E06 I | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 H02 I | 1 | 1 | — | Dec 2007 | Dec 2007 |
| 29 CFR 1910.0134 M02 I | 1 | 1 | — | Dec 2007 | Dec 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3339 within TN. Peer group: 127 employers. This establishment has 23 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TURNER MACHINE CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TURNER MACHINE CO., INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TURNER MACHINE CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TURNER MACHINE CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TURNER MACHINE CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TURNER MACHINE CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TURNER MACHINE CO., INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TURNER MACHINE CO., INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-04-16 | Planned | 8 | 8 | $1,125 | |
| 2015-04-16 | Planned | 2 | — | $0 | |
| 2008-12-18 | Planned | 1 | 1 | $750 | |
| 2007-10-19 | Planned | 12 | 8 | $900 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous general purpose machinery manufacturing within TN, ordered by federal enforcement volume:
- ROSE MACHINE & TOOL LLCCOVINGTON — 2 federal enforcement records
- SENIOR FLEXONICS-PATHWAY DIVISIONOAK RIDGE — 1 federal enforcement record
- DECANTER MACHINE INCJOHNSON CITY — 1 federal enforcement record
- COMPLETE AUTO-MATION INCSMYRNA — 1 federal enforcement record
- ALPHA INTEGRATION INCMURFREESBORO — 1 federal enforcement record
- GEORGE A MITCHELL MANUFACTURING COMPANYCOOKEVILLE — 1 federal enforcement record
- BORDEAU METALS, LLCWHITE BLUFF — 1 federal enforcement record
- REMOTEC, INCCLINTON — 1 federal enforcement record
- ALEMITE LLCJOHNSON CITY — 1 federal enforcement record
- HOST ENGINEERING INCJONESBOROUGH — 1 federal enforcement record
Related searches
- All Other Miscellaneous General Purpose Machinery ManufacturingAll employers in this industry
- Employers in TNState-wide enforcement data
- All Other Miscellaneous in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TURNER MACHINE CO., INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TURNER MACHINE CO., INC.'s OSHA violation history?
- TURNER MACHINE CO., INC. has 4 OSHA inspections on record with 23 violations and $2,775 in total penalties.
- How does TURNER MACHINE CO., INC.'s safety record compare to its industry?
- TURNER MACHINE CO., INC. operates in the all other miscellaneous general purpose machinery manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.