Skip to main content
FastDOL

Establishment profile

TRI MODELS, INC.

5191 OCEANUS DRIVE, HUNTINGTON BEACH, CA, 92649
339999 — All Other Miscellaneous Manufacturing

OSHA inspections
1
over 4 years
Violations
4
$7,065 in penalties
Penalties
$7,065
$1,766 avg

Summary

TRI MODELS, INC. has accumulated 4 OSHA violations across 1 inspection over 4 years of recorded history, with $7,065 in total assessed penalties.

The establishment sits in the 57th percentile for violations within its industry-state peer group of 536 employers. The most recent enforcement activity was recorded 4 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TRI MODELS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.3 / yr · last 4 yrs
Violations
4
1.0 / yr
Penalties
$7,065
$1,766 avg / violation
25% serious75% other
Inspection trigger · accident
1 of 1

100% of inspections at this establishment produced violations,

Peer comparison

57th

Above average violations in NAICS 3399 within CA. Peer group: 536 employers. This establishment has 4 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
80th
peer median: $1,113
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for TRI MODELS, INC.. Verify directly with OSHA Injury Tracking Application →

Industry benchmark

Industry avg TRIR
2.4
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
—
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Accident
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TRI MODELS, INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
4 years ago

No federal enforcement activity has been recorded against this establishment in 4+ years. Most recent activity: 4 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TRI MODELS, INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for TRI MODELS, INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TRI MODELS, INC.. Verify directly with National Labor Relations Board →

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TRI MODELS, INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TRI MODELS, INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TRI MODELS, INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$3.0M
Obligated (all-time)
$8.7M
Awards
83
Top agency
National Aeronautics and Space Administration
$7.8M
Top agencies by obligation (this location)
National Aeronautics and Space Administration$7.8M
Department of Defense$895K
Largest awards (top 50 of 83)
  • National Aeronautics and Space Administration
    CHARACTERIZATION ARRAY FOR THE 10X10FT SUPERSONIC WIND TUNNEL
    contract · Last action 2023-06-07
    $1,262,511
  • National Aeronautics and Space Administration
    LARGE SCALE LOW BOOM SUPERSONIC INLET MODEL
    contract · Last action 2011-01-25
    $644,540
  • Department of Defense
    MODEL AND SUPPORT ASSEMBLY PLATFORM AND TRANSFER CART FOR AEDC TUNNEL 9
    contract · Last action 2024-05-06
    $493,715
  • National Aeronautics and Space Administration
    TAS::80 0125::TAS THIS DELIVERY ORDER IS BEING MADE UNDER THE RECOVERY ACT RECOM DELIVERY ORDER TITLED "DESIGN AND FABRICATION OF THE INTEGRATION HIGH SPEED MODEL CRUISE WING"
    contract · Last action 2011-04-26
    $415,550
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS (RECOM) FUSELAGE SHELL FOR THE GENERAL ROTOR MODEL SYSTEM (GRMS)
    contract · Last action 2010-02-05
    $401,520
  • Department of Defense
    SECOND TAD STING
    contract · Last action 2024-10-23
    $357,838
  • National Aeronautics and Space Administration
    HYPERSONIC INFLATABLE AERODYNAMIC DECELERATORS (HIAD) TEST ARTICLE HARDWARE IN ACCORDANCE WITH SPECIFICATION RGE22000053111 AND THE NASA DRAWINGS.
    contract · Last action 2013-02-20
    $324,889
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS (RECOM) DESIGN AND FABRICATION OF THE ULTRA HIGH BYPASS (UHB) INTEGRATION HIGH SPEED MODEL NACELLE AND PYLON
    contract · Last action 2011-08-08
    $298,694
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATE MODELS (RECOM) DESIGN & FABRICATION OF THE
    contract · Last action 2010-02-18
    $252,160
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS (RECOM) TWIN JET MODEL
    contract · Last action 2010-02-26
    $227,530
  • National Aeronautics and Space Administration
    LEFT AND RIGHT HAND BOLE BOOSTERS
    contract · Last action 2021-12-08
    $211,734
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS (RECOM) DESIGN AND/OR FABRICATION OF AEROSPACE MODEL SYSTEMS AND DEVELOPMENTAL TEST HARDWARE
    contract · Last action 2008-01-28
    $200,000
  • National Aeronautics and Space Administration
    MANUFACTURE, FIT AND ASSEMBLE COMMON RESEARCH MODEL WITH ACTIVE FLOW CONTROL
    contract · Last action 2023-06-21
    $182,968
  • National Aeronautics and Space Administration
    3% BUFFET MODEL BOLE BOOSTERS
    contract · Last action 2020-12-16
    $175,667
  • National Aeronautics and Space Administration
    GROUND SUPPORT EQUIPMENT RV PAIR
    contract · Last action 2021-03-12
    $151,116
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS (RECOM) PRESSURE SENSITIVE PAINT (PSP) ROTOR BLADES
    contract · Last action 2009-03-10
    $147,706
  • National Aeronautics and Space Administration
    DRAGON CAPSULE FORCED OSCILLATION MODEL ASSEMBLY
    contract · Last action 2022-07-12
    $125,485
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATED MODELS - INFLATABLE RE-ENTRY VEHICLE EXPERIMENT (IRVE) II
    contract · Last action 2008-07-22
    $125,433
  • National Aeronautics and Space Administration
    3% BUFFET MODEL NOSE HARDWARE
    contract · Last action 2019-09-17
    $110,262
  • National Aeronautics and Space Administration
    BLOCK 2 BOOSTERS
    contract · Last action 2023-02-23
    $107,656
  • National Aeronautics and Space Administration
    AFT RING MAINTENANCE AND REPAIR OF EQUIPMENT
    contract · Last action 2018-05-03
    $107,426
  • National Aeronautics and Space Administration
    FABRICATION OF THE UPPER SWEPT STRUT DAMPER AND SPLIT DRAW NUT
    contract · Last action 2009-07-28
    $103,482
  • National Aeronautics and Space Administration
    PARACHUTE COMPARTMENT ASSEMBLY
    contract · Last action 2021-01-26
    $94,592
  • National Aeronautics and Space Administration
    DESIGN AND FABRICATION. STATEMENT OF WORK FOR A 1.5% SCALE AEROACOUSTIC MODEL OF THE ARES I FIRST STAGE RE-ENTRY CONFIGURATION.
    contract · Last action 2008-08-21
    $88,664
  • National Aeronautics and Space Administration
    IGF::OT::IGF OTHER FUNCTIONS - RELIANCE CONSOLIDATED MODELS (RECOM) MODIFICATION/TRANSDUCER INSTALLATION TO THE PRESSURE SENSITIVE PAINT (PSP) ROTOR BLADES
    contract · Last action 2013-02-04
    $87,929
  • National Aeronautics and Space Administration
    COMPLETING THE FABRICATION OF THE 18% GULFSTREAM MODEL WING FOR TESTING IN THE NASA LANGLEY'S 14 X 22 WIND TUNNEL. THE CONTRACTOR SHALL PROVIDE MANUFACTURING REVIEW AND FABRICATION SERVICES
    contract · Last action 2010-03-12
    $86,211
  • National Aeronautics and Space Administration
    MACHINING AND FABRICATION EFFORTS IN SUPPORT OF OUR RESEARCH AND DEVELOPMENT PROGRAMS. A BRIEF DESCRIPTION OF REQUIREMENTS ARE AS FOLLOWS:FURNISH ALL PERSONNEL, FACILITIES, SERVICES, EQUIPMENT, SUPPLIES, MATERIALS, AND TRANSPORTATION MUST MEET STRICT RESEARCH SCHEDULES WORK TO SPECIFICATIONS SUCH AS (BUT NOT LIMITED TO) GOVERNMENT-FURNISHED DRAWINGS, SKETCHES, OR WRITTEN NARRATIVES THE CONTRACTOR SHALL CONFORM TO VARIOUS NASA AND INDUSTRY STANDARDS/CODES AS SPECIFIED IN TASK ORDERS. SUCH STANDARDS/CODES INCLUDE (BUT NOT LIMITED TO) ALL APPLICABLE INTERNAL/EXTERNAL LANGLEY MANAGEMENT SYSTEM DOCUMENTS. PERFORM ACCURATE MACHINING AND HANDWORK FOR PRECISION TOLERANCES, FITS, AND FINISHES. DIMENSIONAL TOLERANCES WILL VARY WITH HARDWARE AND MAY RANGE FROM GENERAL (+/- .020 INCHES, 125 RMS) TO TIGHT (+/- .0001 INCHES, 4 RMS) CONSTRAINTS DEPENDING ON THE NATURE OF THE WORK MANUFACTURE, REPAIR, REWORK, OR MODIFY RESEARCH AND FACILITY HARDWARE TO INCLUDE, BUT NOT BE LIMITED TO; STRUCTURAL MEMBERS AND ASSEMBLIES MODIFICATION OF AEROSPACE AND AERONAUTICAL MODELS TWO HOUR RESPONSE TIME ON URGENT DELIVERY ORDERS THREE DAY RESPONSE (OR LESS IF REQUIRED) ON REQUESTS FOR QUOTES GENERAL FABRICATION AND PRECISION MACHINING QUALITY MANAGEMENT SYSTEM THE CONTRACTOR SHALL INSPECT ALL COMPLETED TASKS PRIOR TO DELIVERY TO THE GOVERNMENT TO ENSURE COMPLIANCE WITH THE TASK ORDER AND SPECIFIED STANDARD. THE CONTRACTOR SHALL FURNISH A FINAL INSPECTION REPORT WITH COMPLETED TASKS.
    contract · Last action 2018-03-16
    $81,573
  • National Aeronautics and Space Administration
    WATER TUNNEL MODEL
    contract · Last action 2023-04-27
    $80,390
  • National Aeronautics and Space Administration
    AETHER AEROHEATING STUDY MODEL ASSY DRAWING NUMBERS 3001227-3001229
    contract · Last action 2023-07-20
    $75,312
  • National Aeronautics and Space Administration
    COMMERCIAL HARDWARE - FOREBODY NOSE FORWARD RING (WO# 80993).
    contract · Last action 2019-12-09
    $73,983
  • National Aeronautics and Space Administration
    LOW-EARTH ORBIT FLIGHT TEST OF AN INFLATABLE DECELERATOR (LOFTID) PARACHUTE COMPARTMENT ASSEMBLY
    contract · Last action 2021-03-30
    $69,924
  • National Aeronautics and Space Administration
    PARACHUTE COMPARTMENT ASSEMBLY
    contract · Last action 2021-01-19
    $69,924
  • National Aeronautics and Space Administration
    IGF::OT::IGF KICK&CORE UPPER STAGES
    contract · Last action 2012-12-18
    $66,850
  • National Aeronautics and Space Administration
    45&60 DEGREE ELECTRONIC EXPANSION VALUE (EEV) MODELS
    contract · Last action 2020-03-06
    $65,021
  • National Aeronautics and Space Administration
    AIRFOIL MODELS
    contract · Last action 2011-11-01
    $64,281
  • National Aeronautics and Space Administration
    HYBRID WING BODY BURNER PROTOTYPE
    contract · Last action 2009-01-29
    $62,163
  • National Aeronautics and Space Administration
    TWO HINGE BEAM AND BRACKETS
    contract · Last action 2017-12-15
    $61,731
  • National Aeronautics and Space Administration
    HUMAN LANDING SYSTEM LANDING GEAR TEST
    contract · Last action 2020-10-22
    $59,853
  • National Aeronautics and Space Administration
    BLANKET PURCHASE AGREEMENT
    contract · Last action 2013-05-22
    $59,613
  • National Aeronautics and Space Administration
    THERMAL ICE PROTECTION SYSTEM
    contract · Last action 2008-03-10
    $57,736
  • National Aeronautics and Space Administration
    IGF::OT::IGF FLIGHT ITEMS FAN TRANSITION, FAN/CORE SPLITTER MATERIAL CERTS AND COUPONS REQUIRED, DRAWINGS AND DESIGNS
    contract · Last action 2013-09-12
    $56,353
  • National Aeronautics and Space Administration
    TRAY ASSEMBLY
    contract · Last action 2021-01-21
    $49,640
  • Department of Defense
    BALANCE BLOCK FABRICATION FOR TDW
    contract · Last action 2024-03-25
    $48,028
  • National Aeronautics and Space Administration
    RELIANCE CONSOLIDATE MODELS (RECOM) DESIGN & FABRICATION OF THE DESIGN AND ANALYSIS OF THE GRMS FLUDICIC AFC FUSELAGE RAMP
    contract · Last action 2010-09-02
    $45,384
  • National Aeronautics and Space Administration
    SWEEP ANGLE AND OUTBOARD LEADING EDGES
    contract · Last action 2011-08-11
    $45,384
  • National Aeronautics and Space Administration
    RIGID NOSE
    contract · Last action 2019-09-18
    $44,229
  • National Aeronautics and Space Administration
    SUPPORT WALL ASSEMBLY
    contract · Last action 2021-02-16
    $43,290
  • National Aeronautics and Space Administration
    SUPPORT WALL ASSEMBLY
    contract · Last action 2021-01-20
    $43,290
  • National Aeronautics and Space Administration
    SPACE LAUNCH SYSTEM - BLOCK 1B CARGO NOSE
    contract · Last action 2020-04-28
    $42,140
  • National Aeronautics and Space Administration
    FABRICATION NOZZLE WORK
    contract · Last action 2013-02-20
    $40,844

Federal contract dollars to this establishment. Primary NAICS: 541712 - RESEARCH AND DEVELOPMENT IN THE PHYSICAL, ENGINEERING, AND LIFE SCIENCES (EXCEPT BIOTECHNOLOGY). Last action: 2025-06-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2022-05-19Accident41$7,065

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other miscellaneous manufacturing within CA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on TRI MODELS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TRI MODELS, INC.'s OSHA violation history?
TRI MODELS, INC. has 1 OSHA inspection on record with 4 violations and $7,065 in total penalties.
How does TRI MODELS, INC.'s safety record compare to its industry?
TRI MODELS, INC. operates in the all other miscellaneous manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4.