Skip to main content

Establishment profile

TOPPY'S ARCHITECTURAL MILLWORK, INC.

1201 WALLACE, FORT WORTH, TX, 76105
337110Wood Kitchen Cabinet and Countertop Manufacturing

Download as PDF →

OSHA inspections
5
over 50 years
Violations
36
$3,155 in penalties
Penalties
$3,155
$88 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

TOPPY'S ARCHITECTURAL MILLWORK, INC. has accumulated 36 OSHA violations across 5 inspections over 50 years of recorded history, with $3,155 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 263 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 22 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TOPPY'S ARCHITECTURAL MILLWORK, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.1 / yr · last 50 yrs
Violations
36
0.7 / yr
Penalties
$3,155
$88 avg / violation
58% serious42% other
Inspection trigger · planned
5 of 5

60% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $3,155 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0213 H0433$150Oct 1975Jul 1992
29 CFR 1910.0219 D0122$300Jan 1981Jul 1992
29 CFR 1910.0213 H0122$250Feb 1981Jul 1992
29 CFR 1910.0213 D0122$100Feb 1981Jul 1992
29 CFR 1910.0219 E03 I22Jan 1981Jul 1992
29 CFR 1910.0147 C0111$400Jul 1992Jul 1992
29 CFR 1904.0002 A11$400Jul 1992Jul 1992
29 CFR 1910.1200 G0111$300Jul 1992Jul 1992
29 CFR 1910.0213 C0111$250Jul 1992Jul 1992
29 CFR 1910.0213 C0211$250Jul 1992Jul 1992
29 CFR 1910.0304 F0411$150Jul 1992Jul 1992
29 CFR 1910.0305 G02 II11$150Jul 1992Jul 1992
29 CFR 1910.0213 A1111$150Feb 1981Feb 1981
29 CFR 1910.0309 A 02504511$150Feb 1981Feb 1981
29 CFR 1910.0215 A0211$100Feb 1981Feb 1981
29 CFR 1910.0213 B0311$30Oct 1975Oct 1975
29 CFR 1910.0022 A0111$25Oct 1975Oct 1975
29 CFR 1910.1200 H11Jul 1992Jul 1992
29 CFR 1910.0213 C0311Jul 1992Jul 1992
29 CFR 1910.0215 B0911Jan 1981Jan 1981

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 3371 within TX. Peer group: 263 employers. This establishment has 36 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
53rd
peer median: $2,900
Inspection frequency
95th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.5
BLS SOII 2024
Industry avg DART
2.2
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
22 years ago

No federal enforcement activity has been recorded against this establishment in 22+ years. Most recent activity: 22 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TOPPY'S ARCHITECTURAL MILLWORK, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2004-01-28Planned0$0
1992-05-28Planned1413$2,500
1983-07-20Planned0$0
1981-01-06Planned158$600
1975-10-20Planned7$55

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in wood kitchen cabinet and countertop manufacturing within TX, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on TOPPY'S ARCHITECTURAL MILLWORK, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TOPPY'S ARCHITECTURAL MILLWORK, INC.'s OSHA violation history?
TOPPY'S ARCHITECTURAL MILLWORK, INC. has 5 OSHA inspections on record with 36 violations and $3,155 in total penalties.
How does TOPPY'S ARCHITECTURAL MILLWORK, INC.'s safety record compare to its industry?
TOPPY'S ARCHITECTURAL MILLWORK, INC. operates in the wood kitchen cabinet and countertop manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.5.