Skip to main content

Establishment profile

TOM'S QUALITY MILLWORK, INC

N1308 DRUMLIN DR., CAMPBELLSPORT, WI, 53010
Operated by Tom's Quality Millwork and Hardwoods, Inc
321911Wood Window and Door Manufacturing

Download as PDF →

OSHA inspections
6
over 37 years
Violations
27
$5,383 in penalties
Penalties
$5,383
$199 avg
Accident investigations on record
2 National Emphasis Program inspections

Summary

TOM'S QUALITY MILLWORK, INC has accumulated 27 OSHA violations across 6 inspections over 37 years of recorded history, with $5,383 in total assessed penalties.

The establishment sits in the 86th percentile for violations within its industry-state peer group of 420 employers. Inspection frequency runs at the 87th percentile. The most recent enforcement activity was recorded 23 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

TOM'S QUALITY MILLWORK, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.2 / yr · last 37 yrs
Violations
27
0.7 / yr
Penalties
$5,383
$199 avg / violation
59% serious41% other
Inspection trigger · planned
5 of 6
Inspection trigger · complaint
1 of 6

50% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $5,383 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0122$1,043Nov 1999Jan 2003
29 CFR 1910.0215 B0922Jun 1995Jan 2003
29 CFR 1910.0022 A0122Nov 1999Jan 2003
29 CFR 1910.0147 C0111$675Nov 1999Nov 1999
29 CFR 1910.0213 N0111$675Nov 1999Nov 1999
29 CFR 1910.0151 C11$675Nov 1999Nov 1999
29 CFR 1910.1030 C01 I11$600Nov 1999Nov 1999
29 CFR 1910.0219 D0111$500Jun 1995Jun 1995
29 CFR 1910.0213 H0111$490Jan 2003Jan 2003
29 CFR 1910.0215 A0211$375Jun 1995Jun 1995
29 CFR 1910.1200 G0811$200Nov 1999Nov 1999
29 CFR 1910.0134 C11$150Nov 1999Nov 1999
29 CFR 1910.0242 B11Jan 2003Jan 2003
29 CFR 1910.1200 H11Nov 1999Nov 1999
29 CFR 1910.0022 B0111Nov 1999Nov 1999
29 CFR 1910.0095 E11Nov 1999Nov 1999
29 CFR 1910.0147 C04 I11Nov 1999Nov 1999
29 CFR 1910.1048 D0611Nov 1999Nov 1999
29 CFR 1910.1048 N0111Nov 1999Nov 1999
29 CFR 1904.0002 A11Nov 1999Nov 1999

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

86th

Worse on violations than most other employers in NAICS 3219 within WI. Peer group: 420 employers. This establishment has 27 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
59th
peer median: $3,988
Inspection frequency
87th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
10.6
vs industry
+8.5
TRIR
10.6
vs industry
+7.3

Reported for 123 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.3
BLS SOII 2024
Industry avg DART
2.1
BLS SOII 2024
Self-reported TRIR
10.6
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
5
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TOM'S QUALITY MILLWORK, INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
23 years ago

No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for TOM'S QUALITY MILLWORK, INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for TOM'S QUALITY MILLWORK, INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for TOM'S QUALITY MILLWORK, INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TOM'S QUALITY MILLWORK, INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for TOM'S QUALITY MILLWORK, INC. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2003-01-28Planned52$858
1999-10-05Planned159$3,650
1997-12-22Planned0$0
1997-12-22Planned0$0
1995-05-30Complaint75$875
1988-12-22Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

TOM'S QUALITY MILLWORK, INC is one of 1 establishments rolled up under the parent organization Tom's Quality Millwork and Hardwoods, Inc.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Tom's Quality Millwork and Hardwoods, Inc across all 1 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in wood window and door manufacturing within WI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on TOM'S QUALITY MILLWORK, INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Tom's Quality Millwork and Hardwoods, Inc.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is TOM'S QUALITY MILLWORK, INC's OSHA violation history?
TOM'S QUALITY MILLWORK, INC has 6 OSHA inspections on record with 27 violations and $5,382.5 in total penalties.
How does TOM'S QUALITY MILLWORK, INC's safety record compare to its industry?
TOM'S QUALITY MILLWORK, INC operates in the wood window and door manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3. TOM'S QUALITY MILLWORK, INC's self-reported DART rate is 10.57 compared to an industry average of 2.1.