Establishment profile
TK CUSTOM STONE, INC.
1210 OSBORNE RD., ST MARYS, GA, 31558
327991 — Cut Stone and Stone Product Manufacturing
Summary
TK CUSTOM STONE, INC. has accumulated 21 OSHA violations across 3 inspections over 21 years of recorded history, with $6,300 in total assessed penalties.
The establishment sits in the 86th percentile for violations within its industry-state peer group of 185 employers. Inspection frequency runs at the 78th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TK CUSTOM STONE, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $6,300 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C01 | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.1000 C | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0134 C01 | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $750 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0157 G01 | 1 | 1 | $600 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0157 E02 | 1 | 1 | $450 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0023 D01 III | 1 | 1 | $450 | Jan 2005 | Jan 2005 |
| 29 CFR 1904.0004 A | 1 | 1 | $300 | Jan 2005 | Jan 2005 |
| 29 CFR 1910.1200 G08 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0132 A | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0134 F02 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0134 K03 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0141 G02 | 1 | 1 | — | Jan 2005 | Jan 2005 |
| 29 CFR 1910.0178 L06 | 1 | 1 | — | Jan 2005 | Jan 2005 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3279 within GA. Peer group: 185 employers. This establishment has 21 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TK CUSTOM STONE, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TK CUSTOM STONE, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TK CUSTOM STONE, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TK CUSTOM STONE, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TK CUSTOM STONE, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TK CUSTOM STONE, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TK CUSTOM STONE, INC.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-11-22 | Follow-up | 0 | — | $0 | |
| 2004-10-12 | Complaint | 15 | 14 | $3,300 | |
| 2004-10-12 | Complaint | 6 | 5 | $3,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cut stone and stone product manufacturing within GA, ordered by federal enforcement volume:
- MARBLE WORKS, INC.EATONTON — 2 federal enforcement records
- APEX GRANITE CO INCElberton — 2 federal enforcement records
- GIVENS GRANITE AND TILE, LLCCONYERS — 2 federal enforcement records
- CAESARSTONE TECHNOLOGIES USA INC.RICHMOND HILL — 2 federal enforcement records
- GENERAL SHALE BRICKATLANTA — 2 federal enforcement records
- ELITE COUNTERTOPS, INC.TUCKER — 2 federal enforcement records
- LEVENT INDUSTRIES, INC. DBA ARCHITECTURAL BRASS COATLANTA — 2 federal enforcement records
- STAR GRANITE CO., INC.ELBERTON — 2 federal enforcement records
- CENTURY GRANITE COMPANY, INC.ELBERTON — 2 federal enforcement records
- GUIDONI USA, INC.MC RAE HELENA — 2 federal enforcement records
Related searches
- Cut Stone and Stone Product ManufacturingAll employers in this industry
- Employers in GAState-wide enforcement data
- Cut Stone and in GAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TK CUSTOM STONE, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TK CUSTOM STONE, INC.'s OSHA violation history?
- TK CUSTOM STONE, INC. has 3 OSHA inspections on record with 21 violations and $6,300 in total penalties.
- How does TK CUSTOM STONE, INC.'s safety record compare to its industry?
- TK CUSTOM STONE, INC. operates in the cut stone and stone product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 6.2.