Establishment profile
THOMSON LAMINATION CO., INC.
504 E. LINWOOD AVE., MAPLE SHADE, NJ, 08052
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
THOMSON LAMINATION CO., INC. has accumulated 14 OSHA violations across 5 inspections over 45 years of recorded history, with $14,423 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 56 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 15 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
THOMSON LAMINATION CO., INC. appears in OSHA workplace safety and EPA environmental compliance records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $14,423 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0095 D01 | 1 | 1 | $3,375 | Mar 2011 | Mar 2011 |
| 29 CFR 1910.0217 E01 II | 1 | 1 | $1,913 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,913 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0217 B06 II | 1 | 1 | $1,913 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $1,913 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0179 J02 | 1 | 1 | $1,148 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0024 H | 1 | 1 | $500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0178 G02 | 1 | 1 | $500 | Feb 2011 | Feb 2011 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $500 | Feb 2011 | Feb 2011 |
| 29 CFR 1904.0041 B02 | 1 | 1 | $250 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0095 G05 I | 1 | 1 | — | Mar 2011 | Mar 2011 |
| 29 CFR 1910.0095 K01 | 1 | 1 | — | Mar 2011 | Mar 2011 |
| 29 CFR 1910.0095 B01 | 1 | 1 | — | Jun 1982 | Jun 1982 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within NJ. Peer group: 56 employers. This establishment has 14 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for THOMSON LAMINATION CO., INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Feb 2025
Most frequent event: Caught, entangled in running powered equipment normal operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Feb 4, 2025 | Caught, entangled in running powered equipment normal operation | Other finger(s) n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for THOMSON LAMINATION CO., INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for THOMSON LAMINATION CO., INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for THOMSON LAMINATION CO., INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for THOMSON LAMINATION CO., INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
THOMSON LAMINATION CO PINE & LINWOOD AVE. · MAPLE SHADE, NJ, 08052 | RCRA | No Violation Identified | 1 | 0 | — | Apr 2026 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-02-02 | Referral | 3 | 3 | $3,375 | |
| 2011-01-04 | Planned | 9 | 5 | $10,798 | |
| 2005-12-15 | Other | 1 | — | $250 | |
| 1983-12-14 | Planned | 0 | — | $0 | |
| 1981-06-05 | Complaint | 1 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within NJ, ordered by federal enforcement volume:
- UNITED DIE COMPANY, INC.KEARNY — 2 federal enforcement records
- COMET TOOL COMPANY, INC.PITMAN — 2 federal enforcement records
- FANCORT INDUSTRIES, INC.WEST CALDWELL — 1 federal enforcement record
- TECHNITOOL INCBERLIN TOWNSHIP — 1 federal enforcement record
- GARDEN STATE PRECISIONRIDGEFIELD — 1 federal enforcement record
- L & Z TOOL AND ENGINEERING INC.WATCHUNG — 1 federal enforcement record
- BODINE TOOL & MACHINE CO. INCMOORESTOWN — 1 federal enforcement record
- BONNEY-VEHSLAGE TOOL CO.NEWARK — 1 federal enforcement record
- ZIN-TECH INC. T/A Z-TECH INC.PENNSAUKEN — 1 federal enforcement record
- UNION TOOL & MOLD CO.MAPLEWOOD — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in NJState-wide enforcement data
- Special Die and in NJIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on THOMSON LAMINATION CO., INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is THOMSON LAMINATION CO., INC.'s OSHA violation history?
- THOMSON LAMINATION CO., INC. has 5 OSHA inspections on record with 14 violations and $14,423 in total penalties.
- How does THOMSON LAMINATION CO., INC.'s safety record compare to its industry?
- THOMSON LAMINATION CO., INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.