Establishment profile
TEM, INC.
8 PIERCE DRIVE, BUXTON, ME, 04093
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
EIN 010513841
Summary
TEM, INC. has accumulated 11 OSHA violations across 5 inspections over 21 years of recorded history, with $21,366 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 62 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 10 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TEM, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than most other employers in NAICS 3329 within ME. Peer group: 62 employers. This establishment has 11 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 31 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2025
Most frequent event: Caught, entangled in running powered equipment normal operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 12, 2025 | Caught, entangled in running powered equipment normal operation | Other finger(s) n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
Most recent federal enforcement activity recorded 10 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TEM, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TEM, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TEM, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for TEM, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TEM, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TEM, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseNSN 1560-01-554-4788contract · Last action 2016-08-25$120,757
- Department of Homeland SecurityTHE MANUFACTURE OF FLIGHT CONTROL COVERS TO BE USED ON USCG MH60-T HELICOPTERS.contract · Last action 2021-06-14$108,012
- Department of Homeland SecurityTHIS PURCHASE ORDER IS FOR THE MFG OF VARIOUS PARTS TO BE USED ON USCG H60 HELICOPTERS.contract · Last action 2018-11-07$85,041
- Department of Homeland SecurityMANUFACTURE VARIOUS AIRCRAFT PARTS TO BE USED ON USCG H60 HELICOPTERS.contract · Last action 2020-06-03$79,345
- Department of Homeland SecurityMANUFACTURE OF VARIOUS AIRCRAFT PARTS TO BE USED ON USCG H60 HELICOPTERS.contract · Last action 2020-03-20$63,321
- Department of Homeland SecurityPURCHASE OF TRACK ASSEMBLIES FOR USE ON USCG MH-60T HELICOPTERS.contract · Last action 2023-09-12$61,400
- Department of Defense8505603404!PIN,GROOVED,HEADLESScontract · Last action 2018-06-19$57,060
- Department of Homeland SecurityPURCHASE OF STRUT, A/C, DIAG, R/H TO BE UTILIZED ON USCG MH-60T HELICOPTERS.contract · Last action 2025-05-16$48,860
- Department of Homeland SecurityTHIS PURCHASE ORDER IS TO MANUFACTURE VARIOUS AIRCRAFT PARTS TO BE USED ON USCG H60 HELICOPTERS.contract · Last action 2018-07-19$44,720
- Department of Homeland SecurityPURCHASE OF UPPER AND LOWER SPARK SHIELDS FOR USE ON USCG MH-60T HELICOPTERS.contract · Last action 2022-09-02$40,665
- Department of Homeland SecurityPURCHASE ORDER OF SUPPORT ASSEMBLIES TO BE TESTED AND USED ON USCG MH-60T HELICOPTERS.contract · Last action 2024-03-08$37,754
- Department of Homeland SecurityPURCHASE OF LOWER SPARK SHIELDS TO BE USED ON USCG MH-60T HELICOPTERS.contract · Last action 2025-05-21$36,032
- Department of Homeland SecurityTHE PURCHASE OF THE TRACK ASSEMBLIES WILL BE USED ON USCG H60 HELICOPTERS.contract · Last action 2019-07-10$35,527
- Department of Homeland SecurityPURCHASE OF TRACK ASSEMBLY TO BE USED ON USCG MH-60T HELICOPTERS.contract · Last action 2026-03-18$35,305
- Department of Homeland SecurityMANUFACTURE OF THE CENTER CONSOL SKINS TO BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2023-06-21$33,355
- Department of DefensePINGER PORT COVER ASSEMBLY (P/N 7607861)contract · Last action 2015-10-14$32,212
- Department of Homeland SecurityTHE MANUFACTURED SPARK SHIELDS WILL BE USED ON H60 HELICOPTERS.contract · Last action 2018-03-31$32,064
- Department of Homeland SecurityPURCHASE OF LH AND RH GUIDE TUBES TO BE USED ON MH-60T HELICOPTERS.contract · Last action 2025-04-03$28,970
- Department of Homeland SecurityPURCHASE OF THE LH AND RH GUIDE TUBES TO BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2022-04-12$25,680
- Department of Homeland SecurityPURCHASE OF THE TRACK ASSEMBLY WILL BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2022-02-07$25,272
- Department of Homeland SecurityPURCHASE OF DOOR HANDLE TO BE UTILIZED ON USCG MH-60T HELICOPTERS.contract · Last action 2025-03-28$24,200
- Department of Homeland SecurityPURCHASE OF THE LH AND RH GUIDE TUBES WILL BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2020-10-29$22,999
- Department of Homeland SecurityPURCHASE OF UPPER SPARK SHIELD TO BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2024-02-12$22,650
- Department of Homeland SecurityPURCHASE OF DOOR HANDLE TO BE USED ON MH-60T HELICOPTERS.contract · Last action 2025-08-06$19,360
- Department of Homeland SecurityTHE PURCHASE OF THE DOUBLERS, SKINS, AND PLATES WILL BE USED ON USCG MH-60T HELICOPTERS.contract · Last action 2018-08-16$18,756
- Department of DefenseFITTING, STRUCTURALCcontract · Last action 2017-06-28$16,402
- Department of Homeland SecurityPURCHASE OF LOWER SPARK SHIELDS TO BE USED ON USCG MH60-T HELICOPTERS.contract · Last action 2021-07-29$13,578
- Department of Homeland SecurityTHE PURCHASE OF THE TRACK ASSEMBLIES WILL BE USED ON USCG H60 HELICOPTERS.contract · Last action 2018-08-28$12,273
- Department of Homeland SecurityPURCHASE OF SKIN, APU INLET SCREENS, PLATES, AND EAR ACCESS COVERS FOR USE ON H60 HELICOPTERScontract · Last action 2020-01-08$11,770
- Department of DefenseIGF::OT::IGF INSTALL HYDROSTATIC TEST BENCHcontract · Last action 2014-03-20$10,800
- Department of Homeland SecurityTHE PURCHASE OF TRACK ASSEMBLY TO BE USED ON USCG MH-60T HELICOPTERS.contract · Last action 2024-08-05$10,745
- Department of Homeland SecurityPURCHASE OF THE DOOR HANDLE WILL BE USED ON USCG MH60T HELICOPTERS.contract · Last action 2021-05-14$10,616
- Department of Defense8501045145!WASHER,FLATcontract · Last action 2014-06-12$9,825
- Department of Homeland SecurityPURCHASE OF THE UPPER SPARK SHIELD WILL BE USED ON UNITED STATES COAST GUARD MH-60T HELICOPTERS.contract · Last action 2025-11-05$9,060
- Department of Homeland SecuritySEAT TRACK DRAWINGS, 1ST ARTICLE AND PRODUCTION. SEAT TRACK WILL BE USED ON USCG H60 HELICOPTERS.contract · Last action 2018-02-14$8,750
- Department of DefenseIGF::OT::IGF INSTALL BENCHcontract · Last action 2014-05-30$8,600
- Department of Homeland SecurityPURCHASE OF VARIOUS AIRCRAFT PARTS THAT WILL BE USED ON USCG H60 AIRCRAFT PARTS.contract · Last action 2019-07-19$7,656
- Department of DefenseNSN: 1560-01-554-4788contract · Last action 2021-03-08$0
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2026-03-18. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-08-13 | Referral | 3 | 2 | $6,554 | |
| 2024-02-26 | Complaint | 6 | 5 | $14,156 | |
| 2010-12-29 | Planned | 0 | — | $0 | |
| 2009-12-17 | Planned | 1 | — | $0 | |
| 2004-08-12 | Referral | 1 | 1 | $656 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within ME, ordered by federal enforcement volume:
- BRUNS BROS WELDING INC.GRAY — 1 federal enforcement record
- B. M. CLARK COMPANY, INC.UNION — 1 federal enforcement record
- LIMERICK MACHINE CO.LIMERICK — 1 federal enforcement record
- MAINELY HANDRAILS LLCFAIRFIELD — 1 federal enforcement record
- ROCKWERX, INC.PORTLAND — 1 federal enforcement record
- DAY'S WELDING AND MACHINEMEDWAY — 1 federal enforcement record
- LANE CONVEYORS & DRIVES, INC.BREWER — 1 federal enforcement record
- THE SHYFT GROUP DURAMAG, LLC.WATERVILLE — 1 federal enforcement record
- HOWIE'S WELDINGJAY — 1 federal enforcement record
- BRUNS BROTHERS WELDING INC.GRAY — 1 federal enforcement record
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in MEState-wide enforcement data
- All Other Miscellaneous in MEIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TEM, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TEM, INC.'s OSHA violation history?
- TEM, INC. has 5 OSHA inspections on record with 11 violations and $21,365.6 in total penalties.
- How does TEM, INC.'s safety record compare to its industry?
- TEM, INC. operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6. TEM, INC.'s self-reported DART rate is 0 compared to an industry average of 1.4.