Establishment profile
TECHNICAL FINISHES & COATINGS INC
9120 SE 64TH AVE, PORTLAND, OR, 97206
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
TECHNICAL FINISHES & COATINGS INC has accumulated 8 OSHA violations across 2 inspections over 14 years of recorded history, with $1,100 in total assessed penalties.
The establishment sits in the 69th percentile for violations within its industry-state peer group of 132 employers. Inspection frequency runs at the 34th percentile. The most recent enforcement activity was recorded 6 years ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TECHNICAL FINISHES & COATINGS INC appears in OSHA workplace safety, EPA environmental compliance, UVA Corporate Prosecution Registry, and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3328 within OR. Peer group: 132 employers. This establishment has 8 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TECHNICAL FINISHES & COATINGS INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TECHNICAL FINISHES & COATINGS INC. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Nov 17, 2011 | BURN,CHEMICAL BURN,FALL,TANK,CHEMICAL,LEG | 1 | — | — | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 6+ years. Most recent activity: 6 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TECHNICAL FINISHES & COATINGS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TECHNICAL FINISHES & COATINGS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TECHNICAL FINISHES & COATINGS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for TECHNICAL FINISHES & COATINGS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: Violation.
Federal criminal prosecution record
First case: 2019-11-07. Most recent: 2019-11-07. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
CPSC product recalls
Top hazard: The internal wiring in the LED downlights can contact the downlight's metal trim, posing a shock hazard to consumers.. Most recent recall: 2016-12-01. Source: Consumer Product Safety Commission, matched on company name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-07-17 | Complaint | 4 | 3 | $100 | |
| 2011-11-18 | Accident | 4 | 4 | $1,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within OR, ordered by federal enforcement volume:
- PRECISION METAL FINISHING INCCANBY — 2 federal enforcement records
- PIONEER METAL FINISHING LLCTUALATIN — 2 federal enforcement records
- OREGON SANDBLASTING & COATING INCTUALATIN — 2 federal enforcement records
- ADVANCED PRECISION ANODIZING INCWOOD VILLAGE — 2 federal enforcement records
- EAST SIDE PLATING INCPORTLAND — 2 federal enforcement records
- OREGON PLATING CO INCPORTLAND — 1 federal enforcement record
- J & M SANDBLASTING LLCTROUTDALE — 1 federal enforcement record
- HARDCHROME INCESTACADA — 1 federal enforcement record
- LEADER TECHNOLOGIES INCWILSONVILLE — 1 federal enforcement record
- ED RANSDELLSPRINGFIELD — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in ORState-wide enforcement data
- Electroplating, Plating, Polishing, in ORIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TECHNICAL FINISHES & COATINGS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TECHNICAL FINISHES & COATINGS INC's OSHA violation history?
- TECHNICAL FINISHES & COATINGS INC has 2 OSHA inspections on record with 8 violations and $1,100 in total penalties.
- How does TECHNICAL FINISHES & COATINGS INC's safety record compare to its industry?
- TECHNICAL FINISHES & COATINGS INC operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.