Establishment profile
TECHNA NDT
6707 S 216TH ST, KENT, WA, 98032
332710 — Machine Shops
Summary
TECHNA NDT has accumulated 4 OSHA violations across 1 inspection over 18 years of recorded history, with $100 in total assessed penalties.
The establishment sits in the 36th percentile for violations within its industry-state peer group of 419 employers. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TECHNA NDT appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Below average violations in NAICS 3327 within WA. Peer group: 419 employers. This establishment has 4 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TECHNA NDT. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TECHNA NDT. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TECHNA NDT. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TECHNA NDT. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TECHNA NDT. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for TECHNA NDT. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TECHNA NDT. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TECHNA NDT. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefensePURCHASE AND DELIVERY EDDY CURRENT PROBES BLANKET PURCHASE AGREEMENT (BPA), IN ACCORDANCE WITH (IAW) TECHNICAL ORDER 33B-1-2.contract · Last action 2025-06-18$119,160
- Department of DefenseEDDY CURRENT PROBEScontract · Last action 2022-11-03$90,228
- Department of DefenseROTATING BOLT HOLE EDDY CURRENT PROBEcontract · Last action 2011-10-26$45,560
- Department of DefenseADJUSTABLE BOLT HOLE EDDY CURRENT PROBE.contract · Last action 2009-08-20$43,800
- Department of DefenseROTATING BOLT HOLE EDDY CURRENT PROBEScontract · Last action 2010-08-10$34,500
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2008-08-28$27,427
- Department of Homeland SecurityPURCHASE OF CALIBRATION BLOCKS FOR HC144 AIRCRAFT.contract · Last action 2023-12-06$21,200
- Department of DefenseSGE 661 EDDY CURRENT PROBEcontract · Last action 2009-06-30$17,696
- Department of DefenseSTANDARD 419J STANDARD 447J STANDARD 449J STANDARD 459J STANDARD 843J STANDARD 874 STANDARD 920J STANDARD 958J STANDARD 1034J STANDARD 1035J STANDARD 1037AJ STANDARD 1037BJ STANDARD 1215J STANDARD 1217AJ STANDARD 1217BJ STANDARD 1217CJcontract · Last action 2012-04-05$17,210
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2010-04-29$17,066
- Department of Homeland SecurityPURCHASE OF CALIBRATION BLOCK AND TRANSDUCER, 79 DEG FOR THE HC-144 AIRCRAFT.contract · Last action 2023-11-30$15,930
- Department of DefenseSGE 734 EDDY CURRENT PROBEcontract · Last action 2008-08-01$13,600
- Department of Homeland SecurityPURCHASE OF SPARES FOR THE HC-144 AIRCRAFTcontract · Last action 2026-01-29$13,362
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2008-12-17$13,300
- National Aeronautics and Space AdministrationTHE PURPOSE FOR THIS PROCUREMENT IS FOR THE PURCHASE OF TRANSDUCERS AND ASSOCIATED WEDGES.contract · Last action 2012-03-22$12,097
- Department of DefensePOCKET PROBEcontract · Last action 2013-03-01$10,864
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2010-02-24$9,510
- Department of DefenseOTHER MEASURING AND CONTROLLING DEVICE MANUFACTURINGcontract · Last action 2012-03-01$8,500
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2011-01-06$5,815
- Department of Defense8501384365!SCR.307-S/6 EC PROBE LLPR2contract · Last action 2014-09-23$5,444
- Department of DefenseLM AERO (PDL. 447J) CAL. STANDARD 02-40-contract · Last action 2012-02-24$4,211
- Department of DefensePURCHASE ORDER FOR FIVE (5) SURFACE EDDY CURRENT INSPECTION KITS.contract · Last action 2014-12-22$4,030
- Department of Defense8501483576!SCR.307-S/6 EC PROBE LLPR2contract · Last action 2014-12-17$3,760
- Department of DefenseMULTIPURPOSE ET HOLE INSPECTION KITcontract · Last action 2011-03-02$3,695
- Department of DefenseTITANIUM EDDY CURRENTcontract · Last action 2008-09-04$2,755
- Department of DefensePURCHASE AND DELIVERY EDDY CURRENT PROBES BLANKET PURCHASE AGREEMENT (BPA), IN ACCORDANCE WITH (IAW) TECHNICAL ORDER 33B-1-2.contract · Last action 2022-08-08$0
- Department of DefenseINSPECTION KITScontract · Last action 2014-08-05$0
- Department of DefenseEDDY CURRENT PROBEcontract · Last action 2008-09-16$0
Federal contract dollars to this establishment. Primary NAICS: 334515 - INSTRUMENT MANUFACTURING FOR MEASURING AND TESTING ELECTRICITY AND ELECTRICAL SIGNALS. Last action: 2026-01-29. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-09-18 | Planned | 4 | 1 | $100 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within WA, ordered by federal enforcement volume:
- WESTERN MACHINE WORKSTACOMA — 2 federal enforcement records
- THREE SIGMA MFG INCKENT — 2 federal enforcement records
- PACIFIC SHEET METAL INCMUKILTEO — 2 federal enforcement records
- TOOL GAUGE & MACHINE WORKS INCTACOMA — 2 federal enforcement records
- MEGA MACHINE SHOP INCTUMWATER — 2 federal enforcement records
- BAYVIEW COMPOSITES LLCMOUNT VERNON — 2 federal enforcement records
- SWEENY INDUSTRIES LLCPUYALLUP — 2 federal enforcement records
- AMERICAN ALLOY LLCSPOKANE VALLEY — 2 federal enforcement records
- IRONGATE MACHINE INCBELLINGHAM — 2 federal enforcement records
- ALPHA IRON LLCVANCOUVER — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in WAState-wide enforcement data
- Machine Shops in WAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TECHNA NDT from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TECHNA NDT's OSHA violation history?
- TECHNA NDT has 1 OSHA inspection on record with 4 violations and $100 in total penalties.
- How does TECHNA NDT's safety record compare to its industry?
- TECHNA NDT operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.