Establishment profile
TAYLOR MACHINE WORKS, INC.
3690 N. CHURCH AVE., LOUISVILLE, MS, 39339
333924 — Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
EIN 640281745
Summary
TAYLOR MACHINE WORKS, INC. has accumulated 142 OSHA violations across 23 inspections over 53 years of recorded history, with $36,131 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 29 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 6 months ago.
Federal records were found in 2 of 16 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TAYLOR MACHINE WORKS, INC. appears in OSHA workplace safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
70% of inspections at this establishment produced violations, with 11 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3339 within MS. Peer group: 29 employers. This establishment has 142 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 575 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jan 2018 – Jun 2019
Most frequent event: Ignition of clothing from controlled heat source
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jun 19, 2019 | Jack-knifed or overturned, nonroadway | Multiple body parts, n.e.c. | Hospitalized | |
| Jan 5, 2018 | Ignition of clothing from controlled heat source | Multiple upper extremities locations, n.e.c. | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jun 19, 2019 | Collarbone,Forklift,Fracture,Load Shift,Overturn,Rib,Unsecured,Unstable Load | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
Most recent federal enforcement activity recorded 6 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TAYLOR MACHINE WORKS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TAYLOR MACHINE WORKS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
Company-level in MS — for TAYLOR MACHINE WORKS, INC., not this location alone
National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other TAYLOR MACHINE WORKS, INC. locations in the same state.
Visa & labor certification (OFLC)
Office of Foreign Labor Certification — labor condition applications for H-1B, H-2A, H-2B visa programs. Wage ratio = offered / prevailing wage.
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TAYLOR MACHINE WORKS, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2025-11-25 | Referral | 2 | 1 | $7,093 | |
| 2020-11-23 | Complaint | 1 | — | $995 | |
| 2019-06-20 | Referral | 2 | 1 | $5,797 | |
| 2016-09-07 | Complaint | 6 | 6 | $5,452 | |
| 2013-02-12 | Follow-up | 0 | — | $0 | |
| 2012-06-14 | Planned | 10 | 7 | $8,505 | |
| 1991-01-09 | Follow-up | 0 | — | $0 | |
| 1990-07-25 | Complaint | 9 | 4 | $1,920 | |
| 1988-10-12 | Monitoring | 0 | — | $0 | |
| 1988-04-19 | Planned | 18 | 18 | $1,080 | |
| 1988-03-01 | Planned | 17 | 8 | $2,450 | |
| 1987-01-06 | Planned | 4 | 2 | $180 | |
| 1983-05-18 | Planned | 8 | 1 | $240 | |
| 1983-04-19 | Planned | 1 | — | $0 | |
| 1979-10-10 | Planned | 11 | — | $0 | |
| 1977-01-25 | Follow-up | 0 | — | $0 | |
| 1977-01-05 | Follow-up | 0 | — | $0 | |
| 1976-11-23 | Follow-up | 0 | — | $0 | |
| 1976-11-09 | Follow-up | 3 | — | $320 | |
| 1976-09-14 | Planned | 43 | 2 | $2,030 | |
| 1973-08-13 | Accident | 0 | — | $0 | |
| 1972-11-16 | Complaint | 2 | — | $0 | |
| 1972-11-16 | Complaint | 5 | — | $70 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial truck, tractor, trailer, and stacker machinery manufacturing within MS, ordered by federal enforcement volume:
- RCL COMPONENTS, INC.HERNANDO — 1 federal enforcement record
- C & W CUSTOM TRAILERS INC.GOLDEN — 1 federal enforcement record
Related searches
- Industrial Truck, Tractor, Trailer, and Stacker Machinery ManufacturingAll employers in this industry
- Employers in MSState-wide enforcement data
- Industrial Truck, Tractor, in MSIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on TAYLOR MACHINE WORKS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is TAYLOR MACHINE WORKS, INC.'s OSHA violation history?
- TAYLOR MACHINE WORKS, INC. has 23 OSHA inspections on record with 142 violations and $36,131 in total penalties.
- How does TAYLOR MACHINE WORKS, INC.'s safety record compare to its industry?
- TAYLOR MACHINE WORKS, INC. operates in the industrial truck, tractor, trailer, and stacker machinery manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 4.3. TAYLOR MACHINE WORKS, INC.'s self-reported DART rate is 1.99 compared to an industry average of 2.7.