Establishment profile
TAPEMATION MACHINING, INC.
13 JANIS WAY, SCOTTS VALLEY, CA, 95066
332710 — Machine Shops
EIN 942278565
Summary
TAPEMATION MACHINING, INC. has accumulated 12 OSHA violations across 3 inspections over 26 years of recorded history, with $2,885 in total assessed penalties.
The establishment sits in the 93rd percentile for violations within its industry-state peer group of 388 employers. Inspection frequency runs at the 92nd percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TAPEMATION MACHINING, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $2,885 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 3314(G)(2)(A) | 1 | 1 | $550 | May 2017 | May 2017 |
| 4002(A) | 1 | 1 | $410 | May 2017 | May 2017 |
| 3385(A) | 1 | 1 | $410 | May 2017 | May 2017 |
| 3273(A) | 1 | 1 | $410 | May 2017 | May 2017 |
| 3650(T)(30) | 1 | 1 | $305 | May 2017 | May 2017 |
| 4002 B | 1 | 1 | $200 | Jan 2008 | Jan 2008 |
| 3578 G | 1 | 1 | $200 | Jan 2008 | Jan 2008 |
| 3577 E | 1 | 1 | $100 | Jan 2008 | Jan 2008 |
| 5194 E01 | 1 | 1 | $100 | Sep 2000 | Sep 2000 |
| 3577 B | 1 | 1 | $100 | Sep 2000 | Sep 2000 |
| 4070 A | 1 | 1 | $100 | Sep 2000 | Sep 2000 |
| 3203 A02 | 1 | 1 | — | Sep 2000 | Sep 2000 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within CA. Peer group: 388 employers. This establishment has 12 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 25 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TAPEMATION MACHINING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TAPEMATION MACHINING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TAPEMATION MACHINING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TAPEMATION MACHINING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TAPEMATION MACHINING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TAPEMATION MACHINING, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
TAPEMATION MACHINING INC 13 JANIS WY · SCOTTS VALLEY, CA, 95066 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
TAPEMATION MACHINING INC 13 JANIS WAY · SCOTTS VALLEY, CA, 95066 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2012-01-12. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-02-10 | Complaint | 5 | — | $2,085 | |
| 2007-09-05 | Complaint | 3 | — | $500 | |
| 2000-05-12 | Complaint | 4 | — | $300 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within CA, ordered by federal enforcement volume:
- TTM TECHNOLOGIESSANTA ANA — 3 federal enforcement records
- FELBRO INC.LOS ANGELES — 3 federal enforcement records
- MORGAN ADVANCED CERAMICS INC.AUBURN — 2 federal enforcement records
- FABRICATION CONCEPTS CORPORATIONSANTA ANA — 2 federal enforcement records
- INSPEC MACHINING, LLCCAMARILLO — 2 federal enforcement records
- FABCO AUTOMOTIVE CORPORATIONLIVERMORE — 2 federal enforcement records
- SUNVAIR, INC.VALENCIA — 2 federal enforcement records
- KVAL, INC.PETALUMA — 2 federal enforcement records
- WEST COAST MACHINING INCSANTA FE SPRINGS — 2 federal enforcement records
- CHRISP COMPANYWOODLAND — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in CAState-wide enforcement data
- Machine Shops in CAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TAPEMATION MACHINING, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TAPEMATION MACHINING, INC.'s OSHA violation history?
- TAPEMATION MACHINING, INC. has 3 OSHA inspections on record with 12 violations and $2,885 in total penalties.
- How does TAPEMATION MACHINING, INC.'s safety record compare to its industry?
- TAPEMATION MACHINING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. TAPEMATION MACHINING, INC.'s self-reported DART rate is 0 compared to an industry average of 1.5.