Establishment profile
TANNER TOOL & MACHINE INC
1918 WEST VIRGINIA AVENUE, CREWE, VA, 23930
332312 — Fabricated Structural Metal Manufacturing
Summary
TANNER TOOL & MACHINE INC has accumulated 19 OSHA violations across 3 inspections over 25 years of recorded history, with $1,980 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 468 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
TANNER TOOL & MACHINE INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 19 citations in this view · $1,980 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0178 A04 | 1 | 1 | $300 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $300 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $300 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $225 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0213 B03 | 1 | 1 | $225 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $225 | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $135 | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1026 D02 I | 1 | 1 | $135 | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1052 D02 | 1 | 1 | $135 | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0107 B05 I | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0134 K05 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0147 C07 IV | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1026 L02 I | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.1052 L01 | 1 | 1 | — | Feb 2009 | Feb 2009 |
| 29 CFR 1910.0212 B | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Feb 2001 | Feb 2001 |
| 29 CFR 1910.0213 H04 | 1 | 1 | — | Feb 2001 | Feb 2001 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3323 within VA. Peer group: 468 employers. This establishment has 19 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for TANNER TOOL & MACHINE INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for TANNER TOOL & MACHINE INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for TANNER TOOL & MACHINE INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for TANNER TOOL & MACHINE INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for TANNER TOOL & MACHINE INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for TANNER TOOL & MACHINE INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for TANNER TOOL & MACHINE INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
TANNER TOOL AND MACHINE INC. 1918 E. COLONIAL TRAIL HWY · CREWE, VA, 23930 | RCRA | No Violation Identified | 0 | 0 | — | Apr 2011 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for TANNER TOOL & MACHINE INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-04-09 | Planned | 0 | — | $0 | |
| 2009-01-30 | Planned | 9 | 6 | $405 | |
| 2001-01-30 | Planned | 10 | 7 | $1,575 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in fabricated structural metal manufacturing within VA, ordered by federal enforcement volume:
- COALFIELD SERVICES, INCWYTHEVILLE — 3 federal enforcement records
- VIRGINIA STEEL & FABRICATION, INC.BASTIAN — 2 federal enforcement records
- PIEDMONT METAL PRODUCTS, INC.BEDFORD — 2 federal enforcement records
- GIBSON INDUSTRIAL INC.RICHMOND — 2 federal enforcement records
- NEWMART BUILDERS, INC.SOUTH HILL — 2 federal enforcement records
- JOHN W. HANCOCK JR., INC.SALEM — 2 federal enforcement records
- CIVES STEEL COMPANYWINCHESTER — 2 federal enforcement records
- NEW MILLENNIUM BUILDING SYSTEMS, LLCSALEM — 2 federal enforcement records
- CANATAL STEEL USA INC.ROANOKE — 2 federal enforcement records
- TABET MANUFACTURING COMPANY, INC.NORFOLK — 2 federal enforcement records
Related searches
- Fabricated Structural Metal ManufacturingAll employers in this industry
- Employers in VAState-wide enforcement data
- Fabricated Structural Metal in VAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on TANNER TOOL & MACHINE INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is TANNER TOOL & MACHINE INC's OSHA violation history?
- TANNER TOOL & MACHINE INC has 3 OSHA inspections on record with 19 violations and $1,980 in total penalties.
- How does TANNER TOOL & MACHINE INC's safety record compare to its industry?
- TANNER TOOL & MACHINE INC operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.