Summary
SWISS TOOL CORP. has accumulated 54 OSHA violations across 12 inspections over 52 years of recorded history, with $1,635 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 131,664 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 37 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SWISS TOOL CORP. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 35 citations in this view · $1,635 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 6 | 5 | $170 | Nov 1973 | Apr 1984 |
| 29 CFR 1910.0217 C02 IA | 2 | 2 | $560 | Dec 1976 | Apr 1984 |
| 29 CFR 1910.0219 B01 | 2 | 2 | $240 | Sep 1978 | Oct 1988 |
| 29 CFR 1904.0002 A | 2 | 2 | — | Dec 1976 | Oct 1988 |
| 29 CFR 1910.0217 E01 I | 2 | 2 | — | Nov 1976 | Oct 1988 |
| 29 CFR 1910.0133 A01 | 2 | 2 | — | Dec 1976 | Jan 1982 |
| 29 CFR 1910.0037 K02 | 2 | 2 | — | Nov 1973 | Jan 1982 |
| 29 CFR 1910.0252 A02 IIB | 2 | 2 | — | Nov 1976 | Dec 1979 |
| 29 CFR 1910.0213 H04 | 2 | 2 | — | Nov 1973 | Sep 1978 |
| 29 CFR 1910.0217 B08 I | 2 | 2 | — | Nov 1976 | Sep 1978 |
| 29 CFR 1910.0219 D01 | 2 | 2 | — | Nov 1973 | Dec 1976 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $360 | Oct 1988 | Oct 1988 |
| 29 CFR 1910.0252 E02 III | 1 | 1 | $180 | Oct 1988 | Oct 1988 |
| 29 CFR 1910.0242 B | 1 | 1 | $35 | Nov 1973 | Nov 1973 |
| 29 CFR 1910.0095 A | 1 | 1 | $30 | Nov 1973 | Nov 1973 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $30 | Nov 1973 | Nov 1973 |
| 29 CFR 1910.0037 H01 | 1 | 1 | $30 | Nov 1973 | Nov 1973 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Mar 1989 | Mar 1989 |
| 29 CFR 1910.1200 H | 1 | 1 | — | Oct 1988 | Oct 1988 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Oct 1988 | Oct 1988 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 131,664 employers. This establishment has 54 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SWISS TOOL CORP.. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SWISS TOOL CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 37+ years. Most recent activity: 37 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SWISS TOOL CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SWISS TOOL CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SWISS TOOL CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SWISS TOOL CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SWISS TOOL CORP.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1989-03-15 | Referral | 1 | — | $0 | |
| 1988-10-13 | Planned | 8 | 4 | $780 | |
| 1985-01-02 | Planned | 0 | — | $0 | |
| 1984-04-09 | Complaint | 3 | 1 | $60 | |
| 1982-01-28 | Planned | 0 | — | $0 | |
| 1981-12-28 | Planned | 2 | — | $0 | |
| 1979-11-30 | Planned | 2 | — | $0 | |
| 1978-09-18 | Planned | 7 | — | $0 | |
| 1977-03-03 | Follow-up | 0 | — | $0 | |
| 1976-11-17 | Planned | 18 | 1 | $615 | |
| 1973-11-14 | Planned | 3 | — | $60 | |
| 1973-11-02 | Planned | 10 | — | $120 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NYState-wide enforcement data
About this data
This profile aggregates federal enforcement records on SWISS TOOL CORP. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SWISS TOOL CORP.'s OSHA violation history?
- SWISS TOOL CORP. has 12 OSHA inspections on record with 54 violations and $1,635 in total penalties.