Establishment profile
SWANTON WELDING AND MACHINING CO, INC.
358 HUDSON ROAD, GRIFFIN, GA, 30224
Operated by Swanton Welding & Machining · 1 of 2 establishments
333992 — Welding and Soldering Equipment Manufacturing
Summary
SWANTON WELDING AND MACHINING CO, INC. has accumulated 16 OSHA violations across 3 inspections over 17 years of recorded history, with $11,970 in total assessed penalties.
The establishment sits in the 90th percentile for violations within its industry-state peer group of 79 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SWANTON WELDING AND MACHINING CO, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $11,970 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0252 B02 I A | 1 | 1 | $2,700 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0147 C07 I B | 1 | 1 | $2,160 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0038 A | 1 | 1 | $1,620 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0303 F02 | 1 | 1 | $1,620 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $1,620 | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $938 | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $750 | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0146 C07 I | 1 | 1 | $563 | Apr 2009 | Apr 2009 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0178 L06 | 1 | 1 | — | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | — | Aug 2013 | Aug 2013 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Aug 2013 | Aug 2013 |
| 29 CFR 1910.0132 D01 | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1904.0032 A01 | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1910.0134 C01 | 1 | 1 | — | Apr 2009 | Apr 2009 |
| 29 CFR 1904.0004 A | 1 | 1 | — | Apr 2009 | Apr 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3339 within GA. Peer group: 79 employers. This establishment has 16 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 36 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SWANTON WELDING AND MACHINING CO, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-11-17 | Planned | 0 | — | $0 | |
| 2013-06-13 | Planned | 9 | 7 | $9,720 | |
| 2009-03-06 | Planned | 7 | 3 | $2,250 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
SWANTON WELDING AND MACHINING CO, INC. is one of 2 establishments rolled up under the parent organization Swanton Welding & Machining.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Swanton Welding & Machining across all 2 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in welding and soldering equipment manufacturing within GA, ordered by federal enforcement volume:
- ONE RAIL GROUP, LLCATLANTA — 1 federal enforcement record
- HARRIS PRODUCTS GROUPGAINESVILLE — 1 federal enforcement record
- COMPLETE METAL WORKS, INC.DALLAS — 1 federal enforcement record
- AZZ WSI LLCSUWANEE — 1 federal enforcement record
- J.W. HARRIS CO., INC.GAINESVILLE — 1 federal enforcement record
Other locations under this parent
Other establishments operated by Swanton Welding & Machining, ordered by federal enforcement volume:
- SWANTON WELDING & MACHINING CO., INC.SWANTON, OH — 1 federal enforcement record
Related searches
- All Swanton Welding & Machining locationsParent rollup
- Welding and Soldering Equipment ManufacturingAll employers in this industry
- Employers in GAState-wide enforcement data
- Welding and Soldering in GAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SWANTON WELDING AND MACHINING CO, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Swanton Welding & Machining, which operates 2 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SWANTON WELDING AND MACHINING CO, INC.'s OSHA violation history?
- SWANTON WELDING AND MACHINING CO, INC. has 3 OSHA inspections on record with 16 violations and $11,970 in total penalties.
- How does SWANTON WELDING AND MACHINING CO, INC.'s safety record compare to its industry?
- SWANTON WELDING AND MACHINING CO, INC. operates in the welding and soldering equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.1. SWANTON WELDING AND MACHINING CO, INC.'s self-reported DART rate is 2.41 compared to an industry average of 0.8.