Skip to main content

Establishment profile

STEEL TOOL AND ENGINEERING CO

28005 FORT ST, BROWNSTOWN TOWNSHIP, MI, 48183
333511Industrial Mold Manufacturing
EIN 381600353

Download as PDF →

OSHA inspections
1
over 3 years
Violations
11
$3,900 in penalties
Penalties
$3,900
$355 avg

Summary

STEEL TOOL AND ENGINEERING CO has accumulated 11 OSHA violations across 1 inspection over 3 years of recorded history, with $3,900 in total assessed penalties.

The establishment sits in the 54th percentile for violations within its industry-state peer group of 1,099 employers. The most recent enforcement activity was recorded 3 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

STEEL TOOL AND ENGINEERING CO appears in OSHA workplace safety and EPA environmental compliance records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
1
0.3 / yr · last 3 yrs
Violations
11
3.7 / yr
Penalties
$3,900
$355 avg / violation
82% serious18% other
Inspection trigger · planned
1 of 1

100% of inspections at this establishment produced violations,

Peer comparison

54th

Above average violations in NAICS 3335 within MI. Peer group: 1,099 employers. This establishment has 11 OSHA violations; peer median is 9.

Fewer violationsMore violations
Penalty percentile
79th
peer median: $1,000
Inspection frequency
0th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−1.6
TRIR
1.0
vs industry
−2.1

Reported for 2,022 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.1
BLS SOII 2024
Industry avg DART
1.6
BLS SOII 2024
Self-reported TRIR
1.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for STEEL TOOL AND ENGINEERING CO. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
3 years ago

No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for STEEL TOOL AND ENGINEERING CO. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for STEEL TOOL AND ENGINEERING CO. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for STEEL TOOL AND ENGINEERING CO. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC)

No H-1B, H-2A, or H-2B labor condition applications on file for STEEL TOOL AND ENGINEERING CO. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

EPA inspections
2
Quarters non-compliant
0

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for STEEL TOOL AND ENGINEERING CO. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$74K
Obligated (all-time)
$1.6M
Awards
72
Top agency
Department of Defense
$1.6M
Company-wide — RAPP & SONS INC (across 3 entities)
Obligated (5-yr)
$281K
Obligated (all-time)
$41.7M
Awards (all-time)
268

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Largest awards (top 50 of 72)
  • Department of Defense
    4511394316!SHROUD,SEALING,TURB
    contract · Last action 2009-07-17
    $228,088
  • Department of Defense
    4511149728!HEAVY EQUIPMENT
    contract · Last action 2009-06-18
    $99,168
  • Department of Defense
    4512880818!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-12-22
    $91,173
  • Department of Defense
    4510518440!SHROUD,SEALING,TURB
    contract · Last action 2009-04-14
    $90,239
  • Department of Defense
    4515092474!SHROUD,SEALING,TURB
    contract · Last action 2010-08-03
    $70,946
  • Department of Defense
    4511147197!HEAVY EQUIPMENT
    contract · Last action 2009-06-18
    $67,556
  • Department of Defense
    8501094052!SEAL,AIR,AIRCRAFT G
    contract · Last action 2014-07-03
    $67,444
  • Department of Defense
    8511637908!SHROUD,STAGE 6
    contract · Last action 2025-09-12
    $57,808
  • Department of Defense
    4513196534!SHROUD,SEALING,TURB
    contract · Last action 2010-01-28
    $56,322
  • Department of Defense
    4514258663!SHROUD,SEALING,TURB
    contract · Last action 2010-05-10
    $55,953
  • Department of Defense
    4513465711!SEAL,METALLIC,AIRCR
    contract · Last action 2010-02-24
    $54,401
  • Department of Defense
    4516761667!SEAL,AIR,AIRCRAFT G
    contract · Last action 2011-01-26
    $45,836
  • Department of Defense
    4515376771!SHROUD,SEALING,TURB
    contract · Last action 2010-08-30
    $41,290
  • Department of Defense
    4512627302!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-11-24
    $38,342
  • Department of Defense
    4511308592!SHROUD SECTOR,TURBI
    contract · Last action 2009-07-08
    $35,280
  • Department of Defense
    4516410016!SEAL,METALLIC,AIRCR
    contract · Last action 2010-12-14
    $34,738
  • Department of Defense
    4519905424!BOA
    contract · Last action 2011-12-15
    $22,636
  • Department of Defense
    8500027090!SHROUD,SEALING,TURB
    contract · Last action 2012-05-08
    $20,926
  • Department of Defense
    4519911803!BOA
    contract · Last action 2011-12-16
    $20,631
  • Department of Defense
    4512759317!SHROUD,SEALING,TURB
    contract · Last action 2009-12-09
    $18,670
  • Department of Defense
    8500100969!SHROUD,SEALING,TURB
    contract · Last action 2012-11-30
    $18,305
  • Department of Defense
    8501159775!SEAL,AIR,AIRCRAFT G
    contract · Last action 2014-07-18
    $17,690
  • Department of Defense
    8509151427!SHROUD,STAGE 6
    contract · Last action 2026-01-22
    $16,068
  • Department of Defense
    4514730085!SHROUD,SEALING,TURB
    contract · Last action 2010-06-25
    $15,926
  • Department of Defense
    8500256594!SEAL,AIR,AIRCRAFT G
    contract · Last action 2013-06-20
    $15,094
  • Department of Defense
    8502926098!SHROUD,STAGE 2
    contract · Last action 2016-02-11
    $14,674
  • Department of Defense
    8500100529!SHROUD,SEALING,TURB
    contract · Last action 2013-10-29
    $14,520
  • Department of Defense
    8506840873!MISCELLANEOUS
    contract · Last action 2019-09-17
    $14,419
  • Department of Defense
    4513572532!SEAL,METALLIC,AIRCR
    contract · Last action 2010-03-05
    $14,334
  • Department of Defense
    4511120549!HEAVY EQUIPMENT
    contract · Last action 2009-06-16
    $13,766
  • Department of Defense
    AIRFRAME STRUCTURAL COMPONENTS
    contract · Last action 2009-05-11
    $13,448
  • Department of Defense
    4513348970!SEAL,AIR,AIRCRAFT G
    contract · Last action 2010-02-11
    $12,684
  • Department of Defense
    4513074533!SEAL,AIR,AIRCRAFT G
    contract · Last action 2010-01-15
    $12,684
  • Department of Defense
    4512691608!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-12-02
    $12,684
  • Department of Defense
    4512691619!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-12-02
    $12,684
  • Department of Defense
    4511918975!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-09-10
    $11,221
  • Department of Defense
    4514826005!SHROUD,STAGE 6
    contract · Last action 2010-07-07
    $11,057
  • Department of Defense
    4513722783!SEAL,AIR,AIRCRAFT G
    contract · Last action 2010-06-29
    $10,631
  • Department of Defense
    8500380634!SHROUD,SEALING,TURB
    contract · Last action 2014-12-10
    $9,161
  • Department of Defense
    8500203184!SHROUD,SEALING,TURB
    contract · Last action 2013-07-01
    $9,161
  • Department of Defense
    4511476620!SHROUD,STAGE 2
    contract · Last action 2009-07-27
    $9,066
  • Department of Defense
    4510042450!SHROUD,STAGE 2
    contract · Last action 2009-02-24
    $8,635
  • Department of Defense
    8507587630!SHROUD,STAGE 6
    contract · Last action 2020-08-20
    $8,428
  • Department of Defense
    8506306734!SEAL,METALLIC,AIRCR
    contract · Last action 2019-02-20
    $7,471
  • Department of Defense
    8506655006!SHROUD, STAGE 6
    contract · Last action 2020-02-28
    $7,023
  • Department of Defense
    4510541788!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-04-16
    $6,982
  • Department of Defense
    2840011469394: SEAL, METALLIC, AIRCR
    contract · Last action 2020-12-04
    $6,774
  • Department of Defense
    8502718063!SEAL,METALLIC,AIRCR
    contract · Last action 2015-11-25
    $6,494
  • Department of Defense
    4518659848!SHROUD,STAGE 6
    contract · Last action 2011-08-08
    $5,864
  • Department of Defense
    4511620563!SEAL,AIR,AIRCRAFT G
    contract · Last action 2009-08-11
    $5,751

Federal contract dollars to this establishment. Primary NAICS: 336412 - AIRCRAFT ENGINE AND ENGINE PARTS MANUFACTURING. Last action: 2026-01-22. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2023-04-17Planned119$3,900

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in industrial mold manufacturing within MI, ordered by federal enforcement volume:

Related searches

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

About this data

This profile aggregates federal enforcement records on STEEL TOOL AND ENGINEERING CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Frequently asked

What is STEEL TOOL AND ENGINEERING CO's OSHA violation history?
STEEL TOOL AND ENGINEERING CO has 1 OSHA inspection on record with 11 violations and $3,900 in total penalties.
How does STEEL TOOL AND ENGINEERING CO's safety record compare to its industry?
STEEL TOOL AND ENGINEERING CO operates in the industrial mold manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1. STEEL TOOL AND ENGINEERING CO's self-reported DART rate is 0 compared to an industry average of 1.6.