Summary
STANLEY TOOLS has accumulated 40 OSHA violations across 11 inspections over 49 years of recorded history, with $4,940 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 69,406 employers. Inspection frequency runs at the 100th percentile. The most recent enforcement activity was recorded 44 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
STANLEY TOOLS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
36% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 26 citations in this view · $4,940 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0219 F03 | 2 | 2 | $680 | Jan 1977 | Jul 1979 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $410 | Jan 1977 | Jul 1979 |
| 29 CFR 1910.0219 E01 I | 2 | 2 | $350 | Jan 1977 | Jul 1979 |
| 29 CFR 1910.0108 F01 | 2 | 2 | $180 | Jan 1977 | Jul 1979 |
| 29 CFR 1910.0219 D01 | 2 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0022 A01 | 2 | 2 | — | Jan 1977 | Jan 1979 |
| 29 CFR 1910.0095 A | 1 | 1 | $700 | May 1977 | May 1977 |
| 29 CFR 1910.1000 B01 | 1 | 1 | $700 | May 1977 | May 1977 |
| 29 CFR 1910.0108 F04 | 1 | 1 | $430 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0022 C | 1 | 1 | $260 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $180 | Jan 1977 | Jan 1977 |
| 29 CFR 1910.0108 D | 1 | 1 | $180 | Jan 1977 | Jan 1977 |
| 29 CFR 1910.0108 E02 | 1 | 1 | $180 | Jan 1977 | Jan 1977 |
| 29 CFR 1910.0309 A 025051 | 1 | 1 | $180 | Jan 1977 | Jan 1977 |
| 29 CFR 1910.0252 B04 IXC | 1 | 1 | $170 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $170 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | $170 | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0133 A06 | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0108 G06 I | 1 | 1 | — | Jul 1979 | Jul 1979 |
| 29 CFR 1910.0218 A03 VIII | 1 | 1 | — | Jul 1979 | Jul 1979 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 69,406 employers. This establishment has 40 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for STANLEY TOOLS. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for STANLEY TOOLS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 44+ years. Most recent activity: 44 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for STANLEY TOOLS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for STANLEY TOOLS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for STANLEY TOOLS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for STANLEY TOOLS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for STANLEY TOOLS. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1981-12-21 | Planned | 0 | — | $0 | |
| 1980-03-27 | Follow-up | 0 | — | $0 | |
| 1979-06-19 | Planned | 22 | 9 | $2,160 | |
| 1979-01-23 | Complaint | 1 | — | $0 | |
| 1978-09-05 | Follow-up | 0 | — | $0 | |
| 1978-03-14 | Follow-up | 0 | — | $0 | |
| 1977-12-15 | Follow-up | 0 | — | $0 | |
| 1977-06-20 | Follow-up | 0 | — | $0 | |
| 1977-02-22 | Follow-up | 0 | — | $0 | |
| 1977-01-12 | Planned | 3 | 3 | $1,400 | |
| 1977-01-05 | Planned | 14 | 7 | $1,380 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NJState-wide enforcement data
About this data
This profile aggregates federal enforcement records on STANLEY TOOLS from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is STANLEY TOOLS's OSHA violation history?
- STANLEY TOOLS has 11 OSHA inspections on record with 40 violations and $4,940 in total penalties.