Establishment profile
SPURS MARINE MANUFACTURING, INC.
201 SW 33RD STREET, FORT LAUDERDALE, FL, 33315
332510 — Hardware Manufacturing
Summary
SPURS MARINE MANUFACTURING, INC. has accumulated 3 OSHA violations across 1 inspection over 9 years of recorded history, with $2,173 in total assessed penalties.
The establishment sits in the 63rd percentile for violations within its industry-state peer group of 20 employers. The most recent enforcement activity was recorded 9 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SPURS MARINE MANUFACTURING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $2,173 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $2,173 | Aug 2017 | Aug 2017 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Aug 2017 | Aug 2017 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Aug 2017 | Aug 2017 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3325 within FL. Peer group: 20 employers. This establishment has 3 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SPURS MARINE MANUFACTURING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SPURS MARINE MANUFACTURING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 9+ years. Most recent activity: 9 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SPURS MARINE MANUFACTURING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SPURS MARINE MANUFACTURING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SPURS MARINE MANUFACTURING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SPURS MARINE MANUFACTURING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SPURS MARINE MANUFACTURING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SPURS MARINE MANUFACTURING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Homeland SecurityROTARY CUTTER, QUANTITY 250contract · Last action 2020-05-04$203,438
- Department of Homeland SecurityNSN- 2090-01-50-4303 BLADE, ROTARY CUTTERcontract · Last action 2022-09-19$131,250
- Department of Homeland SecurityNSN: 2090-01-501-4303 BLADE, ROTARY CUTTERcontract · Last action 2019-06-13$124,275
- Department of Homeland SecurityNSN: 2090-01-501-4303 BLADE, ROTARY CUTTERcontract · Last action 2024-08-08$103,700
- Department of Homeland SecurityGASKETS LIDS AND SEPARATOR FILTER, LIQUID FUELcontract · Last action 2018-11-15$82,750
- Department of Homeland SecurityCUTTER ASSEMBLY 2090-01-501-4303contract · Last action 2017-02-18$79,500
- Department of Homeland SecurityROTARY BLADEcontract · Last action 2017-08-25$63,472
- Department of DefenseUSNS RAPPAHANNOCK AND USNS TIPPECANOE SPURS CUTTER SYSTEMcontract · Last action 2017-06-19$61,927
- Department of DefenseSPUR CUTTERS FOR THE PORT AND STARBOARD PROPELLER SHAFT LINE AND NET CUTTER ASSEMBLIES.contract · Last action 2025-07-03$50,620
- Department of DefenseT-AO LINE CUTTER SYSTEM PN - LV-60/48RMSC ACTION DESCRIPTION - N2162250994069contract · Last action 2025-07-16$50,420
- Department of DefenseUSNS JOHN LENTHALL LINE CUTTER SYSTEM FISCAL YEAR 2025contract · Last action 2025-06-17$50,420
- Department of DefenseN104A/ PM1/ C. EDANOL/ LINE CUTTERS - USNS HENRY KAISER T-AO 187contract · Last action 2024-09-30$48,810
- Department of DefensePROPELLER SYSTEM BLADEcontract · Last action 2024-08-15$48,810
- Department of DefenseUSNS GUADALUPE LINE CUTTER SYSTEMcontract · Last action 2025-04-25$48,610
- Department of DefenseSPUR CUTTERS FOR TAO VESSELcontract · Last action 2025-01-08$48,610
- Department of DefenseSPUR CUTTERScontract · Last action 2024-02-09$48,610
- Department of DefenseT-AO LINE CUTTER SYSTEM FOR T-AO VESSELcontract · Last action 2023-05-25$45,036
- Department of DefenseN104A1/PM1/N.BOWERS/T-AO LINE CUTTER SYSTEM LV-60/48Rcontract · Last action 2024-08-09$44,936
- Department of DefenseN104A1/N751/N.BOWERS/USNS PATUXENT SPUR LINE CUTTERScontract · Last action 2023-04-13$44,736
- Department of DefenseN104N751/N.BOWERS/ USNS LARAMIE T-AO LINE CUTTER SYSTEM ITEM#506contract · Last action 2023-04-07$44,736
- Department of DefenseN104A1/PM1, USNS GUADALUPE PROPELLER SHAFT LINE CUTTER, C. JOHNScontract · Last action 2020-09-03$44,200
- Department of DefenseT-AO LINE CUTTER SYSTEMcontract · Last action 2022-02-23$42,210
- Department of DefenseN104A1-N.BOWERS USNS HUMPHREY (T-A0 188)SPUR CUTTER SYSTEMcontract · Last action 2022-03-01$41,762
- Department of DefenseGUADALUPE/RDD 01 APRIL 2015/CLIN 001 LINE CUTTER SYS/ANODE ASSY Rcontract · Last action 2014-09-29$39,800
- Department of DefenseUSNS RAPPHANNOCK. CUTTER SYSTEM(PARTS)contract · Last action 2013-02-12$39,800
- Department of Homeland SecurityROTARY CUTTERcontract · Last action 2017-06-09$39,670
- Department of DefenseN104A1 JOAS, PROPELLER SHAFT LINE CUTTER SYSTEM FOR THE USNS JOHN ERICSSONcontract · Last action 2018-09-07$39,500
- Department of DefenseUSNS ERICSSON, JOHN/ CUTTER SYSTEMcontract · Last action 2010-03-30$38,100
- Department of DefenseN105 PAULO GUADALUPE/RDD T-AO LINE CUTTER SYSTEM LV-60/48Rcontract · Last action 2016-09-30$38,000
- Department of DefenseN102A HAZLEY: LINE CUTTER ASSEMBLIES, USNS KANAWHAcontract · Last action 2018-02-07$37,900
- Department of DefenseUSNS DIEHL, PROP SPURS CUTTERS,contract · Last action 2013-03-14$37,800
- Department of DefenseTIPPECANOE /CUTTING BLADES, LATHEcontract · Last action 2019-02-20$36,293
- Department of DefenseUSNS PECOS, SPUR LINE CUTTER REPLACEMENTcontract · Last action 2009-08-26$36,100
- Department of DefenseUSNS GUADALUPE, STERN TUBE SEAL MAINTENANCE&SPUR A,contract · Last action 2018-03-29$35,628
- Department of DefenseUSNS DIEHL, SPURS LINE AND NET CUTTERS INSPECTION,contract · Last action 2012-06-21$35,525
- Department of DefenseUSNS KAISER, SPURS CUTTER SYSTEM (MODIFIED)contract · Last action 2008-12-22$35,400
- Department of DefenseDIEHLcontract · Last action 2015-09-01$35,162
- Department of DefenseUSNS RAPPAHANNOCK, RDD: 05JAN08, SPURS CUTTER SYSTEMcontract · Last action 2019-02-07$34,117
- Department of Homeland SecurityCUTTER KIT, LINE 2I, LINE CUTTER MODEL D-2, SPUR LINE AND NET CUT6TER ASSEMBLY.contract · Last action 2009-04-30$32,500
- Department of Homeland SecurityNSN: 2010-01-507-4448: CUTTER LINE 2" - PART NUMBER: MODEL D-2contract · Last action 2008-03-27$26,000
- Department of Homeland SecurityLINE CUTTER ASSEMBLY FOR THE 41' AND 47'contract · Last action 2013-04-25$24,710
- Department of Homeland SecurityROTARY LINE CUTTERS FOR PROP SHAFT OF 47' MLBcontract · Last action 2010-09-14$23,250
- Department of Homeland Security2090-015014303 BLADE, ROTARY CUTTERcontract · Last action 2015-04-01$21,950
- Department of Homeland SecurityROTARY CUTTERcontract · Last action 2012-01-04$20,072
- Department of DefenseUSNS GRUMMAN N102C-LEWIS ROTARY BLADE SETS 2EA P/N 506-Bcontract · Last action 2017-04-11$15,500
- Department of Homeland SecurityBLADE, ROTARY CUTTERcontract · Last action 2008-06-05$9,750
- Department of CommerceTHIS IS A LINE CUTTER FOR THE NOAA SHIP RAINIER.contract · Last action 2015-05-04$7,263
- Department of Homeland SecurityROTARY CUTTER, BLADEcontract · Last action 2007-11-19$7,237
- Department of Homeland SecurityROTARY CUTTERcontract · Last action 2017-11-01$6,347
- Department of Homeland SecurityLIINE CUTTERcontract · Last action 2009-08-19$4,715
Federal contract dollars to this establishment. Primary NAICS: 332510 - HARDWARE MANUFACTURING. Last action: 2025-07-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-03-02 | Planned | 3 | 1 | $2,173 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in hardware manufacturing within FL, ordered by federal enforcement volume:
- PERKO, INC.MIAMI — 1 federal enforcement record
- UNITED DRONES, LLCNAPLES — 1 federal enforcement record
- ADVANTUS CORPJACKSONVILLE — 1 federal enforcement record
- SIZEMORE WELDING, INC.BUNNELL — 1 federal enforcement record
- MICA CRAFT & DESIGN INC.RIVIERA BEACH — 1 federal enforcement record
- PORTA PRODUCTS CORPORATIONNEW SMYRNA BEACH — 1 federal enforcement record
- GENERAL STAMPING & MFG., CORP.HIALEAH — 1 federal enforcement record
Related searches
- Hardware ManufacturingAll employers in this industry
- Employers in FLState-wide enforcement data
- Hardware Manufacturing in FLIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SPURS MARINE MANUFACTURING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SPURS MARINE MANUFACTURING, INC.'s OSHA violation history?
- SPURS MARINE MANUFACTURING, INC. has 1 OSHA inspection on record with 3 violations and $2,173.2 in total penalties.
- How does SPURS MARINE MANUFACTURING, INC.'s safety record compare to its industry?
- SPURS MARINE MANUFACTURING, INC. operates in the hardware manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.9.