Skip to main content
FastDOL

Establishment profile

SPIRAL BRUSHES INC.

1355 COMMERCE DRIVE, STOW, OH, 44224
EIN 311507017

Download as PDF →

OSHA inspections
3
over 39 years
Violations
1
$368 in penalties
Penalties
$368
$368 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.
Accident investigations on record
1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

SPIRAL BRUSHES INC. has accumulated 1 OSHA violation across 3 inspections over 39 years of recorded history, with $368 in total assessed penalties.

The establishment sits in the 32nd percentile for violations within its industry-state peer group of 85,425 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 25 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SPIRAL BRUSHES INC. appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
3
0.1 / yr · last 39 yrs
Violations
1
0.0 / yr
Penalties
$368
$368 avg / violation
100% serious0% other
Inspection trigger · complaint
2 of 3
Inspection trigger · follow-up
1 of 3

33% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 1 distinct standard shown · 1 citation in this view · $368 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A0111$368Oct 2000Oct 2000

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

32nd

Below average violations. Peer group: 85,425 employers. This establishment has 1 OSHA violation; peer median is 2.

Fewer violationsMore violations
Penalty percentile
72nd
peer median: $0
Inspection frequency
89th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
3.7
vs industry
—
TRIR
3.7
vs industry
—

Reported for 32 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Inspection breakdown

Complaint
2
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SPIRAL BRUSHES INC.. Verify directly with Occupational Safety and Health Administration →

Activity timeline

Data refreshed
Weekly
First OSHA inspection
—
Most recent activity
25 years ago

No federal enforcement activity has been recorded against this establishment in 25+ years. Most recent activity: 25 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SPIRAL BRUSHES INC.. Verify directly with Wage and Hour Division →

Mine safety (MSHA)

No MSHA mine safety violations on file for SPIRAL BRUSHES INC.. Verify directly with Mine Safety and Health Administration →

Labor relations (NLRB)

Company-level in OH — for SPIRAL BRUSHES INC., not this location alone

Total cases
4
Unfair labor practice
1
Representation (union)
3

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other SPIRAL BRUSHES INC. locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 4 cases · 1 ULP · 3 representation

Case numberTypeFiledClosedStatusRegion
08-CA-067301Unfair labor practiceOct 2011Nov 2011ClosedRegion 08, Cleveland, Ohio
08-RD-065990Representation electionOct 2011Nov 2011ClosedRegion 08, Cleveland, Ohio
08-RD-065806Representation electionSep 2011Oct 2011ClosedRegion 08, Cleveland, Ohio
08-RD-002128Representation electionNov 2008Dec 2008ClosedRegion 08, Cleveland, Ohio

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SPIRAL BRUSHES INC.. Verify directly with Office of Foreign Labor Certification →

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SPIRAL BRUSHES INC.. Verify directly with Environmental Protection Agency →

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SPIRAL BRUSHES INC.. Verify directly with UVA Corporate Prosecution Registry →

Federal contracts

This location

Obligated (5-yr)
$0
Obligated (all-time)
$13K
Awards
46
Top agency
Department of Defense
$7K
Top agencies by obligation (this location)
Department of Defense$7K
General Services Administration$7K
Largest awards
  • Department of Defense
    NAME: WHEEL STAINLES PART NUMBER: 7103
    contract · Last action 2013-07-25
    $3,404
  • Department of Defense
    BRUSH, RIGID BRISTLE SHANK MOUNT
    contract · Last action 2017-04-19
    $3,296
  • General Services Administration
    BRUSH WIRE, ROTARY WHEEL IAW COMMERCIAL ITEM, DESCRIPTION A-A-2516 DATED 04/01/97 MK EA TOOL IN A PE
    contract · Last action 2008-04-21
    $580
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: WIRE BRUSH, ROTARY CUP IAW NEW SPIRAL BRUSHES PN. 76075 OR EQUAL. (PART IAL
    contract · Last action 2008-06-23
    $435
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: WIRE BRUSH, ROTARY CUP IAW NEW SPIRAL BRUSHES PN. 76075 OR EQUAL. (PART IAL
    contract · Last action 2008-06-23
    $435
  • General Services Administration
    WHEEL, ABRASIVE: DIAMETER- 3" ; THICKNESS- 2" ; STAINLESS STEEL. SPIRAL BUSHES INC. P/N 46
    contract · Last action 2009-01-29
    $378
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RA
    contract · Last action 2008-07-02
    $255
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RA
    contract · Last action 2008-10-03
    $230
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2007-12-13
    $224
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: IAW CID A-A-2516A, D ATED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH) C LASS: 2(STAINLESS STEEL) OUTSIDE DIAMETER: 4 INC HES WIRE DIAMETER: 0.006 INCHES ARBOR HOLE: 1/2 INCH WIRE TRIM LENGTH: 3/4 TO 1 INCH NUMBER OF W IRE POINTS: 10,900 MAX SAFE SPEED IN RPMS: 4500 (PARTIAL DESCRIPTION)
    contract · Last action 2009-11-05
    $221
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2007-10-23
    $210
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2007-10-23
    $210
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RA
    contract · Last action 2008-02-21
    $193
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RASS) OUTSIDE BRUSH DIAMETER: 1" . WIRE DIAMETER: 0.006" . ARBOR DIAMETER: 1/4" . WIRE TRIM LENGTH: 3/4" TO 1" . MAX SAFE SPEED: 8,000 RPM. (PARTIAL DESCRIPTION) SHIP TO:MPC DDDC SAN DIEGO RECEIVING 2680 WODEN ST BLDG 3304 DW 7 SAN DIEGO CA 92136-5491
    contract · Last action 2009-07-10
    $170
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-10-03
    $155
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-09-30
    $143
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-02-13
    $137
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 TYPE III: HIGH TEMPERED STEEL CLAS S
    contract · Last action 2009-02-27
    $135
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 TYPE III: HIGH TEMPERED STEEL CLAS S
    contract · Last action 2008-08-05
    $135
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 TYPE III: HIGH TEMPERED STEEL CLAS S
    contract · Last action 2008-07-11
    $135
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2008-06-25
    $135
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2008-03-28
    $125
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2008-02-12
    $125
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2008-02-12
    $125
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2007-11-02
    $125
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-10-22
    $119
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW COMMERCIAL ITEM DESCRIPTION CID A-A-2512, DTD 4/1/87. PKG & PK STD
    contract · Last action 2008-04-21
    $112
  • General Services Administration
    WIRE BRUSH (CUP - CRIMPED WIRE)
    contract · Last action 2019-01-29
    $111
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-02-13
    $105
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: IAW CID A-A-2516, DA TED 04/01/87. BRUSH, WIRE, ROTARY, WHEEL TYPE II :
    contract · Last action 2007-10-23
    $104
  • General Services Administration
    TAS::97 4930::TAS BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RASS) OUTSIDE BRUSH DIAMETER: 1" . WIRE DIAMETER: 0.006" . ARBOR DIAMETER: 1/4" . WIRE TRIM LENGTH: 3/4" TO 1" . MAX SAFE SPEED: 8,000 RPM. (PARTIAL DESCRIPTION) QUOTE# 54906
    contract · Last action 2010-07-13
    $102
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: IAW CID A-A-2516, DA TED 04/01/87. TYPE: I (NARROW FACE WIDTH). CLASS : 3 (HIGH CARBON TEMPERED STEEL). OUTSIDE BRUSH DIAMETER: 8" . WIRE DIAMETER: 0.014" . ARBOR HOLE DIAMETER: 3/4" . WIRE TRIM LENGTH: 1-7/8" . WIRE P OINTS: 4600 MINIMUM. SAFE FREE SPEED: 3500 RPM M AX. (PARTIAL DESCRIPTION)
    contract · Last action 2011-07-01
    $99
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RA
    contract · Last action 2008-07-02
    $85
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-01-15
    $74
  • General Services Administration
    BRUSH, WIRE, ROTARY, WHEEL: IAW CID A-A-2516, DA TED 04/01/87. BRUSH, WIRE, ROTARY, WHEEL TYPE II :
    contract · Last action 2007-10-23
    $69
  • General Services Administration
    BRUSH, WIRE, ROTARY, END: IAW CID A-A-2513A, DAT ED MAY 16, 2002 ROTARY END WIRE BRUSH TYPE: I (B RA
    contract · Last action 2008-07-07
    $68
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 TYPE III: HIGH TEMPERED STEEL CLAS S
    contract · Last action 2009-10-28
    $67
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2008-01-24
    $62
  • General Services Administration
    BRUSH, WIRE, ROTARY CUP: IAW CID A-A-2512A DATED MAY 16, 2002 BRUSH, WIRE, ROTARY CUP OUTSIDE DI AM
    contract · Last action 2007-10-15
    $62
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-09-30
    $59
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2007-12-13
    $56
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-04-17
    $53
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2008-02-13
    $53
  • General Services Administration
    BRUSHES, WIRE, ROTARY WHEEL MSP - 145 SHIP TO: CONTAINERIZATION CONSOLIDATION PT DEFENSE DEPOT SUSQU
    contract · Last action 2008-02-28
    $52
  • General Services Administration
    BRUSH, WIRE, ROTARY WHEEL: IAW CID A-A-2516A, DA TED MAY 16, 2002. TYPE: I (NARROW FACE WIDTH). C LA
    contract · Last action 2007-10-05
    $51
  • General Services Administration
    WIRE BRUSH (CUP - TWISTED TUFT)
    contract · Last action 2021-04-13
    $0

Federal contract dollars to this establishment. Primary NAICS: 332212 - HAND AND EDGE TOOL MANUFACTURING. Last action: 2021-04-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2000-10-19Complaint11$368
1987-01-07Complaint0—$0
1986-10-31Follow-up0—$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on SPIRAL BRUSHES INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SPIRAL BRUSHES INC.'s OSHA violation history?
SPIRAL BRUSHES INC. has 3 OSHA inspections on record with 1 violation and $367.5 in total penalties.