Skip to main content

Establishment profile

SHAWNEE STEEL & WELDING, INC.

6124 MERRIAM DRIVE, MERRIAM, KS, 66203
332312Fabricated Structural Metal Manufacturing

Download as PDF →

OSHA inspections
9
over 47 years
Violations
24
$7,885 in penalties
Penalties
$7,885
$329 avg
Accident investigations on record
3 National Emphasis Program inspections

Summary

SHAWNEE STEEL & WELDING, INC. has accumulated 24 OSHA violations across 9 inspections over 47 years of recorded history, with $7,885 in total assessed penalties.

The establishment sits in the 85th percentile for violations within its industry-state peer group of 264 employers. Inspection frequency runs at the 93rd percentile. The most recent enforcement activity was recorded 11 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SHAWNEE STEEL & WELDING, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
9
0.2 / yr · last 47 yrs
Violations
24
0.5 / yr
Penalties
$7,885
$329 avg / violation
46% serious54% other
Inspection trigger · planned
7 of 9
Inspection trigger · complaint
1 of 9

67% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 24 citations in this view · $7,885 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0212 A03 II33$578Apr 1979Oct 2004
29 CFR 1910.0243 C0322$1,488Jan 1987Aug 2012
29 CFR 1910.0212 A0122$893Jan 1987Aug 2012
29 CFR 1910.0212 A03 II11$1,785Aug 2012Aug 2012
29 CFR 1910.0178 L02 II11$1,470Oct 2014Oct 2014
29 CFR 1910.0254 B04 IV11$1,470Oct 2014Oct 2014
29 CFR 1910.0303 B0211$113Oct 2004Oct 2004
29 CFR 1910.0215 A0211$90Apr 1979Apr 1979
29 CFR 1910.0037 B0211Oct 2014Oct 2014
29 CFR 1910.1200 F0511Oct 2014Oct 2014
29 CFR 1910.0147 C0111Oct 2004Oct 2004
29 CFR 1910.0095 L0111Nov 1986Nov 1986
29 CFR 1910.0095 K0111Nov 1986Nov 1986
29 CFR 1910.0095 G0111Nov 1986Nov 1986
29 CFR 1910.0133 A0111Nov 1986Nov 1986
29 CFR 1910.1200 E0111Nov 1986Nov 1986
29 CFR 1910.1200 H11Nov 1986Nov 1986
29 CFR 1910.1200 G0111Nov 1986Nov 1986
29 CFR 1910.0095 D0111Nov 1986Nov 1986
29 CFR 1910.0215 B0911Apr 1979Apr 1979

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

85th

Worse on violations than most other employers in NAICS 3323 within KS. Peer group: 264 employers. This establishment has 24 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
78th
peer median: $1,732
Inspection frequency
93rd
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for SHAWNEE STEEL & WELDING, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
7
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SHAWNEE STEEL & WELDING, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
11 years ago

No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SHAWNEE STEEL & WELDING, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for SHAWNEE STEEL & WELDING, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for SHAWNEE STEEL & WELDING, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SHAWNEE STEEL & WELDING, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SHAWNEE STEEL & WELDING, INC.. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
328901
Operation
B

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SHAWNEE STEEL & WELDING, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2015-01-16Planned0$0
2014-10-09Planned42$2,940
2012-04-26Planned33$4,165
2004-10-07Planned32$300
1986-12-18Planned31$240
1986-11-04Planned8$0
1982-12-07Planned0$0
1979-05-16Follow-up0$0
1979-03-29Complaint33$240

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in fabricated structural metal manufacturing within KS, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on SHAWNEE STEEL & WELDING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SHAWNEE STEEL & WELDING, INC.'s OSHA violation history?
SHAWNEE STEEL & WELDING, INC. has 9 OSHA inspections on record with 24 violations and $7,885 in total penalties.
How does SHAWNEE STEEL & WELDING, INC.'s safety record compare to its industry?
SHAWNEE STEEL & WELDING, INC. operates in the fabricated structural metal manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.4.