Skip to main content

Establishment profile

SHANE STEEL PROCESSING INC

17495 MAYLN, FRASER, MI, 48026

Download as PDF →

OSHA inspections
9
over 36 years
Violations
24
$4,005 in penalties
Severe violator (proxy)
YES
FastDOL heuristic — not confirmation of formal OSHA SVEP listing.
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.

Summary

SHANE STEEL PROCESSING INC has accumulated 24 OSHA violations across 9 inspections over 36 years of recorded history, with $4,005 in total assessed penalties.

The establishment sits in the 77th percentile for violations within its industry-state peer group of 1,617 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 20 years ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SHANE STEEL PROCESSING INC appears in OSHA workplace safety, NLRB labor relations, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
9
0.3 / yr · last 36 yrs
Violations
24
0.7 / yr
Penalties
$4,005
$167 avg / violation
46% serious54% other
Inspection trigger · complaint
6 of 9
Inspection trigger · planned
3 of 9

56% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $4,005 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 4081.07270122$1,100Dec 1992Mar 1995
29 CFR 1910.0169 B03 I22Dec 1992Mar 1995
29 CFR 4081.263311$300Aug 1995Aug 1995
29 CFR 4081.04330611$300Mar 1995Mar 1995
29 CFR 4081.33700111$300Dec 1992Dec 1992
29 CFR 4081.0011 C11$300Dec 1992Dec 1992
29 CFR 4081.00340911$300Dec 1992Dec 1992
29 CFR 4081.01140211$300Dec 1992Dec 1992
29 CFR 4081.144111$300Dec 1992Dec 1992
29 CFR 4081.00340311$300Dec 1992Dec 1992
29 CFR 4081.00150311$280Mar 1995Mar 1995
29 CFR 4081.33120111$225Jun 2006Jun 2006
29 CFR 4081.18720211Jun 2006Jun 2006
29 CFR 4081.2611 A11Aug 1995Aug 1995
29 CFR 1910.0305 B0211Mar 1995Mar 1995
29 CFR 1910.0305 A01 I11Mar 1995Mar 1995
29 CFR 1910.0146 C0111Mar 1995Mar 1995
29 CFR 4081.1254 B11Dec 1992Dec 1992
29 CFR 1910.0309 B11Dec 1992Dec 1992
29 CFR 4081.06450211Dec 1992Dec 1992

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

77th

Above average violations in NAICS 3363 within MI. Peer group: 1,617 employers. This establishment has 24 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
65th
peer median: $1,775
Inspection frequency
91st
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for SHANE STEEL PROCESSING INC. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.0
BLS SOII 2024
Industry avg DART
1.9
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
3
Complaint
6

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SHANE STEEL PROCESSING INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
20 years ago

No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SHANE STEEL PROCESSING INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for SHANE STEEL PROCESSING INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

Company-level in MI — for SHANE STEEL PROCESSING INC, not this location alone

Total cases
5
Unfair labor practice
5

National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other SHANE STEEL PROCESSING INC locations in the same state.

NLRB cases

National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 5 cases · 5 ULP

Case numberTypeFiledClosedStatusRegion
07-CA-050252Unfair labor practiceMar 2007Apr 2007ClosedRegion 07, Detroit, Michigan
07-CA-049085Unfair labor practiceNov 2005Feb 2006ClosedRegion 07, Detroit, Michigan
07-CA-048016Unfair labor practiceOct 2004Dec 2009ClosedRegion 07, Detroit, Michigan
07-CA-047748Unfair labor practiceAug 2004Oct 2007ClosedRegion 07, Detroit, Michigan
07-CA-047710Unfair labor practiceJul 2004Dec 2009ClosedRegion 07, Detroit, Michigan

Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SHANE STEEL PROCESSING INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SHANE STEEL PROCESSING INC. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
342171
Operation
C

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Inspection history

DateTriggerViolationsSeriousPenalty
2006-06-07Planned21$225
1996-05-31Complaint0$0
1995-08-09Complaint21$300
1995-03-02Planned71$1,380
1992-11-10Complaint21$300
1992-10-23Planned117$1,800
1992-02-27Complaint0$0
1991-03-14Complaint0$0
1989-12-07Complaint0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in this industry within MI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on SHANE STEEL PROCESSING INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SHANE STEEL PROCESSING INC's OSHA violation history?
SHANE STEEL PROCESSING INC has 9 OSHA inspections on record with 24 violations and $4,005 in total penalties.