Establishment profile
SENTER TOOL SERVICE INC
5413 NE COLUMBIA BLVD, PORTLAND, OR, 97218
Summary
SENTER TOOL SERVICE INC has accumulated 25 OSHA violations across 4 inspections over 41 years of recorded history, with $1,190 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 66,834 employers. Inspection frequency runs at the 96th percentile. The most recent enforcement activity was recorded 35 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SENTER TOOL SERVICE INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $1,190 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 7155.001501 | 2 | 2 | — | May 1989 | Aug 1991 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $420 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0215 B02 | 1 | 1 | $105 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0022 C | 1 | 1 | $105 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0219 C02 I | 1 | 1 | $105 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | $105 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $105 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $75 | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | $75 | Aug 1991 | Aug 1991 |
| 29 CFR 7127.002002 | 1 | 1 | $50 | Aug 1991 | Aug 1991 |
| 29 CFR 7640.15501 | 1 | 1 | $45 | Apr 1985 | Apr 1985 |
| 29 CFR 7155.003001 A | 1 | 1 | — | Aug 1991 | Aug 1991 |
| 29 CFR 1910.0147 C01 | 1 | 1 | — | Aug 1991 | Aug 1991 |
| 29 CFR 7127.001501 | 1 | 1 | — | Aug 1991 | Aug 1991 |
| 29 CFR 1926.0404 A02 | 1 | 1 | — | Mar 1991 | Mar 1991 |
| 29 CFR 1926.0404 B01 I | 1 | 1 | — | Mar 1991 | Mar 1991 |
| 29 CFR 7127.002001 | 1 | 1 | — | May 1989 | May 1989 |
| 29 CFR 7155.002005 A | 1 | 1 | — | May 1989 | May 1989 |
| 29 CFR 7610.08003 | 1 | 1 | — | May 1989 | May 1989 |
| 29 CFR 7700.0305 | 1 | 1 | — | Apr 1985 | Apr 1985 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 66,834 employers. This establishment has 25 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SENTER TOOL SERVICE INC. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SENTER TOOL SERVICE INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 35+ years. Most recent activity: 35 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SENTER TOOL SERVICE INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SENTER TOOL SERVICE INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SENTER TOOL SERVICE INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SENTER TOOL SERVICE INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SENTER TOOL SERVICE INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SENTER TOOL SERVICE INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 1991-06-24 | Planned | 13 | 8 | $1,145 | |
| 1991-03-05 | Planned | 2 | — | $0 | |
| 1989-04-20 | Planned | 4 | 4 | $0 | |
| 1985-02-26 | Planned | 6 | 1 | $45 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in ORState-wide enforcement data
About this data
This profile aggregates federal enforcement records on SENTER TOOL SERVICE INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SENTER TOOL SERVICE INC's OSHA violation history?
- SENTER TOOL SERVICE INC has 4 OSHA inspections on record with 25 violations and $1,190 in total penalties.