Establishment profile
SEAL & DESIGN INC.
4015 CASILIO PARKWAY, CLARENCE, NY, 14031
339991 — Gasket, Packing, and Sealing Device Manufacturing
EIN 161340721
Summary
SEAL & DESIGN INC. has accumulated 4 OSHA violations across 2 inspections over 3 years of recorded history, with $13,000 in total assessed penalties.
The establishment sits in the 58th percentile for violations within its industry-state peer group of 437 employers. Inspection frequency runs at the 71st percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SEAL & DESIGN INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $13,000 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A02 | 1 | 1 | $7,500 | Jan 2023 | Jan 2023 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $3,000 | Jan 2023 | Jan 2023 |
| 29 CFR 1910.0242 B | 1 | 1 | $2,500 | Jan 2023 | Jan 2023 |
| 29 CFR 1910.0147 C07 I A | 1 | 1 | — | Jan 2023 | Jan 2023 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3399 within NY. Peer group: 437 employers. This establishment has 4 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 127 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Oct 2022
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Oct 27, 2022 | Caught in running equipment or machinery during regular operation | Fingertip(s) | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SEAL & DESIGN INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SEAL & DESIGN INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SEAL & DESIGN INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SEAL & DESIGN INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SEAL & DESIGN INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SEAL & DESIGN INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseO-RING, M83461/1-025-N756-70 TFE BLcontract · Last action 2008-05-02$21,580
- Department of Defense4513033993!O-RINGcontract · Last action 2010-01-13$3,608
- Department of DefenseO-RING M83461/1-025-N756-70contract · Last action 2009-01-12$-58
- Department of DefenseO-RING F/END CAPcontract · Last action 2009-01-09$-70
- Department of DefenseO-RINGcontract · Last action 2009-11-04$-139
Federal contract dollars to this establishment. Primary NAICS: 339991 - GASKET, PACKING, AND SEALING DEVICE MANUFACTURING. Last action: 2010-01-13. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2023-07-27 | Follow-up | 0 | — | $0 | |
| 2022-11-03 | Referral | 4 | 4 | $13,000 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in gasket, packing, and sealing device manufacturing within NY, ordered by federal enforcement volume:
- GARLOCK SEALING TECHNOLOGIESPALMYRA — 4 federal enforcement records
- INTERFACE SOLUTIONS INCHOOSICK FALLS — 2 federal enforcement records
- PAWLING ENGINEERED PRODUCTS, INC.PAWLING — 2 federal enforcement records
- SEALING DEVICES INC.LANCASTER — 1 federal enforcement record
- LOOMIS-ROOT, INC.AMHERST — 1 federal enforcement record
- JOHN CRANE INC.TONAWANDA — 1 federal enforcement record
- VIKING POLYMER SOLUTIONS, LLCALBION — 1 federal enforcement record
- XTO INCORPORATEDLIVERPOOL — 1 federal enforcement record
- 54AERFACE SEALING SOLUTIONSCROGHAN — 1 federal enforcement record
- FRANK LOWE RUBBER AND GASKET COMPANY INC.SHIRLEY — 1 federal enforcement record
Related searches
- Gasket, Packing, and Sealing Device ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- Gasket, Packing, and in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SEAL & DESIGN INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SEAL & DESIGN INC.'s OSHA violation history?
- SEAL & DESIGN INC. has 2 OSHA inspections on record with 4 violations and $13,000 in total penalties.
- How does SEAL & DESIGN INC.'s safety record compare to its industry?
- SEAL & DESIGN INC. operates in the gasket, packing, and sealing device manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.8. SEAL & DESIGN INC.'s self-reported DART rate is 5.25 compared to an industry average of 1.2.