Skip to main content

Establishment profile

SCHNADIG CORPORATION

160 FURNITURE DRIVE, CORNELIA, GA, 30531
321918Other Millwork (including Flooring)

Download as PDF →

OSHA inspections
6
over 52 years
Violations
31
$675 in penalties
Severe violator (proxy)
YES
FastDOL heuristic — not confirmation of formal OSHA SVEP listing.
Accident investigations on record
1 National Emphasis Program inspections

Summary

SCHNADIG CORPORATION has accumulated 31 OSHA violations across 6 inspections over 52 years of recorded history, with $675 in total assessed penalties.

The establishment sits in the 96th percentile for violations within its industry-state peer group of 450 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 21 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SCHNADIG CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
6
0.1 / yr · last 52 yrs
Violations
31
0.6 / yr
Penalties
$675
$22 avg / violation
Inspection trigger · planned
4 of 6
Inspection trigger · complaint
1 of 6

67% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $675 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0219 E0122$160Feb 1974Jan 1976
29 CFR 1910.0133 A0111$90Feb 1974Feb 1974
29 CFR 1910.0213 D0111$70Jan 1976Jan 1976
29 CFR 1910.0213 G0111$70Jan 1976Jan 1976
29 CFR 1910.0106 E0611$60Feb 1974Feb 1974
29 CFR 1910.0213 H0111$45Feb 1974Feb 1974
29 CFR 1910.0106 E02 IIB211$30Feb 1974Feb 1974
29 CFR 1910.0213 C0111$30Feb 1974Feb 1974
29 CFR 1910.0107 E0211$30Feb 1974Feb 1974
29 CFR 1910.0242 B11$30Feb 1974Feb 1974
29 CFR 1910.0219 F0311$30Feb 1974Feb 1974
29 CFR 1910.0151 C11$30Feb 1974Feb 1974
29 CFR 1910.0107 B0111Dec 1981Dec 1981
29 CFR 1910.0022 B0111Dec 1981Dec 1981
29 CFR 1910.0022 A0111Jan 1976Jan 1976
29 CFR 1910.0037 Q0111Jan 1976Jan 1976
29 CFR 1910.0106 G0811Jan 1976Jan 1976
29 CFR 1910.0176 G11Jan 1976Jan 1976
29 CFR 1910.0212 A0111Jan 1976Jan 1976
29 CFR 1910.0213 P0411Jan 1976Jan 1976

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

96th

Worse on violations than nearly every other employer in NAICS 3219 within GA. Peer group: 450 employers. This establishment has 31 OSHA violations; peer median is 4.

Fewer violationsMore violations
Penalty percentile
31st
peer median: $3,423
Inspection frequency
95th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for SCHNADIG CORPORATION. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
4.0
BLS SOII 2024
Industry avg DART
2.5
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SCHNADIG CORPORATION. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
21 years ago

No federal enforcement activity has been recorded against this establishment in 21+ years. Most recent activity: 21 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SCHNADIG CORPORATION. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for SCHNADIG CORPORATION. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for SCHNADIG CORPORATION. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SCHNADIG CORPORATION. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SCHNADIG CORPORATION. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility · 1 marked inactive.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
SCHNADIG CORP
US HWY 23 · CORNELIA, GA, 30531
AirNo Violation Identified00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Inspection history

DateTriggerViolationsSeriousPenalty
2005-03-17Planned0$0
1981-12-02Planned2$0
1976-02-25Follow-up0$0
1976-01-06Complaint12$300
1974-03-21Planned1$0
1974-01-24Planned16$375

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other millwork (including flooring) within GA, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on SCHNADIG CORPORATION from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SCHNADIG CORPORATION's OSHA violation history?
SCHNADIG CORPORATION has 6 OSHA inspections on record with 31 violations and $675 in total penalties.
How does SCHNADIG CORPORATION's safety record compare to its industry?
SCHNADIG CORPORATION operates in the other millwork (including flooring) industry. The industry average Total Recordable Incident Rate (TRIR) is 4.